Labcaire Model SC12R Recirculating Class II Microbiological Safety Cabinet Lab

Slanted electrical front window Plugged holes in side windows Double socket UV light with magnetic f (more)astening Air flow: 0.45 m/s Recirculation air volume: 965 m3/h Exhaust air volume: 383 m3/h Total air volume: 1348 m3/h Dimensions (WxDxH): 1280 x 840 x 1380 mm Internal dimensions (WxDxH): 1190 x 600 x 665 mm Support frame height: 800 mm Weight: 281 kg

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions - D54 W106 H70cm

Thermo Fisher Safe 2020 1.2 Class 2 Biological Safety Cabinet This item was removed from a universit (more)y lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV and window up/down function properly. It was last serviced in April 2024. It is in good cosmetic condition with some minor marks from use. Safe Working area 64 x 120cm Includes:-Manual-Stand for unit Socket tester not included.

This Stem Corporation Block Heater & Chiller  Model - RS2550 was removed from a university  (more)lab where it was surplus to requirements. The heater powers up and has been tested with a digital thermometer (not included).When set to 37˚C the display showed 37˚C and the thermometer measured 36.2˚C.When set to 55˚C (max) the display showed 57˚C and the thermometer measured 53˚C. We were unable to test the shiller as we don't have the connecting cable. The magnetic stirrer seems to be working well. 25 x 27mm diameter tube holes

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab This item was removed from a university wher (more)e it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).

XA 52.5Y.F Analytical Balances for Filters XA 5Y.F Analytical Balances are used to determine absorpt (more)ion in the process of differential filter mass measurement with the highest readability [d] of 0.01 mg. For this reason, in addition to the regular weighing pan, XA 5Y.F balances have a weighing pan for filters. The devices are also equipped with a manually opened weighing chamber and use a semi-automatic levelling system. Semi-automatic Leveling System Semi-automatic levelling, the so-called LevelSENSING System, has a great advantage over the manual levelling, in the case of the former one the user is prompted in which direction to level the balance. This shortens the very process. 5Y PLUS Balances (Smart Min Weight, Integrated Ionizer, Two-Point Adjustment and Much More) – You Have It Already. With ELLIPSIS Balances, You Have the Same and More: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Gilson PIPETMAN M Multichannel P8x200M BT Connected Pipette PIPETMAN M Connected is a Bluetooth enab (more)led electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P8x200M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty

Eppendorf 1 x 25ml Adapters, Cat. # 022639145 The Eppendorf 1 x 25ml adapters (Cat. # 022639145) are (more) for round 85ml buckets with the A-4-38 rotor. For use with Eppendorf 5702/R centrifuges. This is a two piece set, and the adapters are new in packaging.