FASTER BH-EN 2004-D Class II Biological Safety Cabinet Lab

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab (more) where it was surplus to requirements. The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included. It is in reasonably good cosmetic condition internally and externally. Inside dimensions - D63 W120 H70cm Hours - 1078 1.2

This Bigneat F3-XIT-D Powder Weighing and Handling Cabinet was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with some marks and paint chips/rust from use.

BioMAT 2 Class 2 Microbiological Safety Cabinet CAS This was removed from a laboratory where it was  (more)surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 08:10:2021.

The screen of the display, provide intuitive and practical colour codes which immediately show the c (more)abinet status: • Green screen: Cabinet in safe condition • Red screen: Cabinet out of specification • Yellow screen: Cabinet being decontaminated The main screen provides a visual display of the laminar flow speed and filter clogging. The Ecomode function allows the cabinet to run at low speed in one single click, in order to protect the sample while the operator is doing other tasks. This saves energy, reduces sound level and heat emission. Other features of the display: • Constant information on the air flow status: – Laminar flow speed – Extraction rate – Inflow speed • A timer to program the daily activation of fans and UV light • Two password levels (user and technical service) • Acoustic and visual alarms with an information message: – Excessive or insufficient laminar flow speed – Insufficient exhaust rate – Glass away from the working position – Open front window – UV lamp activated (interlocked with the front closed position) Laminar flow speed: 0.35 m/s Laminar flow rate: 1310 m3/h Front entry air speed: 0.5 m/s Extraction flow rate: 564 m3/h Lighting: > 1000 Lux Sound: < 58 dBA Vibration: < 0.005 mm RMS. Filters: HEPA/ULPA H14 filters. Digital display with PIN password for menu settings box. 2 electrical connections left/right. Dimensions (WxDxH): 1964 x 759 x 1260 mm Internal dimensions (WxDxH): 1869 x 602 x 580 mm Support frame height: 900 mm Weight: 280 kg

Recirculation air volume: 725 m3/h Exhaust air volume: 284 m3/h Total air volume: 1009 m3/h In flow: (more) 0.45 m/s Standard lighting : 2x 36 W Exhaust duct: ø 200 mm Internal dimensions (WxDxH): 885 x 600 x 655 mm Dimensions (WxDxH): 975 x 790 x 2180 mm Weight: 180 kg

Digital Display, Total Control of Operations AREX Digital PRO is the evolution of our best-seller, t (more)he most advanced tool available to date. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). The SpeedServo ™ system ensures a constant speed even when the viscosity varies (counter-reaction). AREX Digital PRO offers the most advanced technology, being equipped with digital displays to set and monitor both stirring speed and temperature constantly and with absolute precision. Temperature regulation of the liquid being processed with an external probe The AREX Digital PRO package includes the external Pt100 probe, capable of reaching 250°C, with an accuracy of ±1.0°C, providing a ready-to-use system capable of directly thermoregulating the sample being processed. Previous model video: Maximum Temperature Homogeneity The particular CerAlTop™ plate, in aluminum alloy coated with a ceramic layer, ensures a formidable homogeneity of the temperature over the entire surface of the plate itself, up to 370°C and at the same time an excellent resistance to chemical agents and ease of cleaning. Maximum Protection, IP 42 AREX Digital PRO magnetic stirrers guarantee a high level of safety and protection for the user. The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. AREX Digital PRO can be programmed with a maximum safety temperature, for some particular applications that require specific temperatures and in order to prevent unpleasant situations. In addition, the electronic board activates a high temperature warning ('Hot Plate Warning') which remains active even with the instrument off, when the plate temperature is above 50°C. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design AREX Digital PRO offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use and make it clear that the digital displays indicating speed and temperature can be read. Greater Versatility with the new MonoAlublock™ and MultiAlublock™ The MultiAlublock™ and the new MonoAlublock™ made of aluminum are ideal for carrying out numerous agitation and heating analyzes, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, you can choose the mix that best suits your needs. Technical features: Pt100 connection: provided Vertex connection: provided Counter-reaction: constant speed Electronic temperature regulation: from room temp. to 370°C Maximum safety temperature digitally settable: temperature limit can be set between 50 and 370 °C "Hot Plate Warning"  whenever the top plate temperature is over 50 °C Sample thermoregulation: ± 0.5 °C by using the Vertex thermoregulator (AREX Digital PRO); ± 1.0 °C by using Pt100 Stirring system: high-power driving magnet type ''PCM'' operated by a mono-phase motor for continuous operation

Hermle Z326K refrigerated centrifuge. Adjustable temperature from -20 ºC to 40 ºC with pre-cooling.  (more)Maximum speed (depending on rotor) 18,000 rpm/23542 xg. Maximum capacity 4*100 mL. Storage up to 99 programs. Timer up to 99 h 59 min or continuous. Low noise level <63 dB. Imbalance alarms and overspeed protection. Includes angular rotor with maximum speed of 6,000 rpm and capacity for 6 50 mL falcon-type tubes and adapters for 15 mL tubes. Dimensions: 400*700*360 mm; 60 kg. User manual. The Hermle Z326 K centrifuge is high-quality laboratory equipment with exceptional performance. This centrifuge is ideal for a wide range of sample separation and purification applications. In addition, it has an advanced cooling system that allows for quiet and efficient operation.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.

Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V Speed Range 30 rpm to 2,000 rpm Capacity 2 (more)5 L Maximum Viscosity 25,000 mPas Features - Powerful mixing and constant speed is assured with the brushless motor and torque compensation technology - Delivers accurate, controlled stirring of viscous liquids with quiet operation. - Simplify set up with the Keyless Chuck - no tools required. - Change shafts quickly and easily with one handed operation. This unique design will save time and effort for everyone in the lab. - Designed for safety. The lock button prevents accidental speed changes and the motor’s overload sensing technology simply shuts off stirring before an overload condition occurs to protect the sample. - Compact and easy to use. - Simple knob control combined with the bright digital display allows for precise setting and monitoring. - Customize for your application with over 12 accessories. The OHAUS e-A51ST040 Achiever 5000™ Overhead Stirrer is designed for powerful, precise stirring, safety, and simplicity in your lab applications. The A51ST040is a versatile overhead stirrer ideal for various applications in laboratories across industries like food &amp; beverage, cosmetics, paints &amp; coatings, pharmaceuticals, and more. INCLUDED: The Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Biochrom Expert 96 is a PC- controlled modern design multi-channel microplate reader, for fast p (more)late reading of standard ANSI SBS footprint 96 well, flat, round and v-bottomed plates. The Biochrom Expert 96 has four shaking modes for mixing of solutions and the ability to perform readings at timed intervals ideal for kinetic assays.

Polarimetry is an important technique for the investigation and analysis of optically active substan (more)ces. Common applications include: Characterization of newly synthesized compounds Quality control of pharmaceutical drugs Precise quantitative analysis of sugars Selective detection of optically active components by HPLC Monitoring and control of enzymatic reactions Principle: Automatic precision Polarimeter with optical null principle by rotation of the analyzer; automatic gain control. Radiation: Na spectral lamp Spectral lines: Selectable from instrument keypad (Na 589 nm) Apertures: Selectable apertures for standard cells and microcells. Detector: Photomultiplier 1P28A. Polarizer and analyzer: Vis-transmitting polarizers Rotatory range: ± 85° Balancing speed: 1.3°/s at 50 Hz; 1.5°/s at 60 Hz. Accuracy: ± 0.002° for rotations ≤1º; ± 0.2% for rotations >1° Reproducibility: Better than 0.002° (for zero and rotational reading). Internal angular resolution: 1 x 10-4 º Integration times: 0.1s, 0.2s, 0.5s, 1s, 2s, 5s, 10s, 20s, 50s and 100s. Autozero setting: Electronically from instrument keypad at any desired position in the rotatory range. User interaction: Either menu-driven from integrated touch-keys (English, German, French, Spanish and Italian), or PC-controlled from POL WinLab or POL WinLab ES software. Display: Stand-alone operation: vacuum fluorescence display, two lines with 20 characters each. Format of results: Selectable from instrument keypad – angular rotation, specific rotation, molar rotation, international sugar scale, user-defined scale with factor and offset. Dimensions (WxHxD): 825 x 310 x 390 mm Weight: 40 kg