BIGNEAT F3-XIT BPXS03/01A Powder Weighing Station Safety Cabinet Lab

Scanlaf Mars 900 Biohazard Safety Cabinet Class 2 This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in good working order. It i in good cosmetic condition with marks from use.

2x Lasermet LS-10 Series Laser Shutters These items were removed from a university lab where they we (more)re surplus to requirement. Both items are in good cosmetic condition, we are unable to test them at our facility.

CABINET CSB120 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thi (more)ck electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards In dotazione: - 3 plasticized steel shelves (max load 80 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

COMBISTORAGE CS260 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Ventilation and filter - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

Pre filter: G3 (EN 779), 1760 x 445 mm Donflow filter: Astrocell HEPA 18P6+, 610 x 1830 x 69 mm, H14 (more) acc. EN 1822 Exhaust filter: Astrocell HEPA 7P6, 762 x 610 x 69 mm, H14 acc. EN 1822 Average downflow speed (work mode): 0.36 m/s Average downflow speed (standby mode): 0.10 – 0.20 m/s Average inflow speed in whole front aperture: >0.5 m/s Exhaust airflow 600 m³/h Lighting: TL-high output and UV-C Front aperture (work mode) (HxW): 165 x 1800 mm Front aperture maximum height: 350 mm Interior dimensions (HxWxD): 725 x 1800 x 605 mm Exterior dimensions (HxWxD): 1552 x 1943 x 844 mm Support frame height: 745 mm Weight: 315 kg

Leica Microscope Micromanipulator with Stand This was removed from a university lab where it was su (more)rplus to requirements. The unit is in good working order and good cosmetic condition with minor marks from use.

Buchi Rotavapor R-3 w/ R-3 HB Water Bath Lab This item was removed from a university lab where it wa (more)s surplus to requirements. It is in good cosmetic condition and in good working order. Condenser not included.

Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 5409706004 The Eppendorf FA-45-30-11 Fixed Angle Ro (more)tor, Cat. #: 5409706004, is a centrifuge rotor designed for use with the Eppendorf 5427R centrifuges. This rotor has a maximum speed of 14,000 RPM and a maximum relative centrifugal force (RCF) of 20,817 x g. It can accommodate a maximum capacity of up to 30 × 1.5/2.0 mL tubes. INCLUDED: The Eppendorf FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 5409706004 SpecificationsMaximum Speed14,000 RPMMaximum RCF20,817 x gMaximum Capacity30 × 1.5/2.0 mL tubesRadius9.5 cmCentrifuge CompatibilityEppendorf 5427R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Gilson PIPETMAN L Multichannel P8x20L, 2-20 uL Pipette Designed for performance and comfort, PIPETMA (more)N® L comes in acomprehensive range of models adapted to your needs in the lab. Comfortable,precise, accurate, and reliable, use PIPETMAN L pipettes confidently in yourapplications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volumesingle channel models covering a volume range from 0.2 μL to 10 mL - Variable volumemultichannel models covering a volume range from 0.5 μL to 1200 μL, includingfour models equipped with V-rings (VR) at the bottom of the tip holder for aproper fit with most tip brands, covering a volume range from 20 µL to 300 µL - Fixed volumesingle channel models covering a volume range from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines an ergonomicdesign with minimized pipetting forces, giving you the ability to pipettelonger without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you.Secure PipettingReduce pipetting errors and avoid accidental volume changesduring pipetting cycles with a true volume-locking mechanism for improvedaccuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals.Choose your ModelChoose your channel number and volume range, up to 1200 μLfor various protocols. Four PIPETMAN L multichannel models equipped withV-rings (VR models) offer an improved compatibility with tips from otherbrands.GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. FA10009INCLUDED: The Gilson PIPETMAN L Multichannel P8x20L, 2-20 uL Pipette includes: - Operator's Guide - 3 Year Manufacturer's Warranty

Sterilization pressure/temperature: 2 bar/134°C; 1 bar/121°C Disinfection pressure/tempeperature: 0. (more)3 bar/105°C Program list: See pictures Maximum load: 5 kg of instruments or 1.8 kg of textiles Water storage tank (demineralized/distilled water): 5 L (approx. 7 cycles) Chamber capacity: 17.6 L Chamber dimensions (ØxD): 250 x 360 mm Dimensions (HxWxD): 485 x 425 x 595 mm Weight: 43 kg

Manufacturer: ERWEKA Model: TPK 2 S/N: 124164.10d5 MFG date: 2005 Description: The ERWEKA Valve-Box (more) is testing unit for Dry Powder Inhalers.With Dry Powder Inhalers, both the emitted and fine particle dose are affected by the strength and duration of the patient’s inspiration.The ERWEKA Valve-Box allows the user to adjust the air flow from the Vacuum pump in such way, that it complies with the latest pharmacopoeial specifications.If required hard-copy documentation of the test-parameters can be created. Specifications and features: TPK Version 1.07AThe TPK 2 menu system automatically guides the user through the correct test set-up procedure.A series of menus guide the user through the operation of the instrument.Two external pressure ports.4-line LCD display of all parameters.USB printer port interface for data output.U: 240 vF: 50-60 Hz Items delivered: - ERWEKA TPK 2- Power Supply- Instruction Manual as PDF via E-Mail request Condition: The Valve-Box is in very good cosmetic condition and 100% functional tested.