Air Science DWS 48 Downdraft Fume Hood- 48" / 1200mm Wide Downflow Workstation

Captair Erlab Ministore 822A - GB Cabinet Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, with fan operating.

*Potentially worth looking into Password protected features* Bigneat Ductless Fume Hood Model PR1506 (more) This item was removed from a university laboratory where it was surplus to requirements. It powers on and is in good cosmetic condition. The LED lights are functional. Airflow is audibly operational; however, an 'airflow low' alarm activates every 5 minutes due to completely depleted filters, which need replacing. Airflow fluctuates between 0.34 and 0.14 M/S We have deemed this spares/repairs due to the low airflow. Specifications: - Model: PR1506 Includes: - LED lights

LabCaire Fume Cabinet Model-HLF18 This item was removed from a university where it was surplus to re (more)quirement. It powers on and is in good working order. This item is in reasonably good cosmetic condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CABINET CS 120 - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P01, t (more)hickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - CE marked electric fan with self-extinguishing, antistatic technopolymer case resistant to corrosive agents - Protection fuses: 5x20 mm, fast flow 1A - Aspirator flow rate: max 275 m3/h - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Millipore Merck Model: Manu-CART Items delivered:- 1x Cap Nut- 2x Spin Collects- 1x En (more)d Fitting

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System This system was removed from a universit (more)y lab where it was surplus to requirements. The microscope is in working order, but we have not tested the laser due to safety restrictions at our site. There are no objectives fitted. Items included are: -Zeiss LSM Control S/N- 000260-Hal 100 Lamp -Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07-Zeiss HBO 100W-Zeiss HBO 100W/2-Zeiss Lasermodul UV-Fujitsu Siemans mouse-Relevant manuals and guides-Connection cables-Comms PCi Cards &amp; Dongle (non USB)

Ohaus Guardian 2000 e-G21HS04C Hotplate Stirrer, 115V The Ohaus Guardian 2000 Series Hotplates, Stir (more)rers, and Hotplate Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder which accepts the optional support rod. Stirring models include PTFE coated stir bars. The Guardian 2000 Series units feature powerful stirring and fast heating at an economical price. Safely heat up to 500°C and stir up to 15L with easy-to-use knob control for simple and reliable everyday heating and stirring in the lab. Designed to last - the rugged metal housing has a spill resistant design for long life in the lab under harsh conditions. The smooth, chemical-resistant ceramic top plate is perfect for easy clean up. Safety is also of utmost importance, and the prominent hot top indicator light illuminates when the heater is above 40°C, keeping the end user safe during all heating applications. INCLUDED: The Ohaus Guardian 2000 e-G21HS04C Hotplate Stirrer, 115V includes: - PTFE-Coated Stir Bar (2.5 cm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark IPD9600-1520 Adapter for 40x2ml tubes, set of 2, aluminum, requires IPD9600-96 The Benchma (more)rk IPD9600-1520 Adapter for 40x2ml tubes, set of 2, aluminum, requires IPD9600-96 is for use with the Beadblaster 96 Ball Mill Homogenizer. This product is an adapter for 40x2ml tubes, and additionally requires the Benchmark IPD9600-96 for use. INCLUDED: The Benchmark IPD9600-1520 Adapter for 40x2ml tubes, set of 2, aluminum, requires IPD9600-96 includes: - Set of 2 Benchmark IPD9600-1520 Adapters - Manufacturer's Documentation - 1 Year Manufacturer's Warranty