Telstar Bio II Advance 6 Biological Safety Cabinet

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab This item was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 180cm Unit height with stand: 226cm Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand. Socket tester not included.

This Labcaire Recirculating Class II Microbiological Safety Cabinet Model SC12R was remove (more)d from a university lab where it was surplus to requirements. The unit was last used 3 years ago and the lab are confident it was working when least used. The unit powers up and both the fan and white light work. There is no UV light fitted. It is in reasonably good cosmetic condition with some marks from use. The last inspection record recommends that the Pre-Filter is replaced Inside dimensions - D58 W120 H62cm

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab (more) where it was surplus to requirements. The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included. It is in reasonably good cosmetic condition internally and externally. Inside dimensions - D63 W120 H70cm Hours - 1078 1.2

BioMat 2 Class II Microbiological Safety Cabinet with Ducted Exhaust on Stand This item was removed  (more)from a university where it was surplus to requirements. The cabinet is in good cosmetic condition and includes a steel stand measuring 113 x 60 x 83 cm (w x d x h). The unit powers up and is in good working order. A strong airflow was observed, and the inflow needle indicator reached the green safe zone during operation. Interior power sockets were tested and are functional. (Socket tester not included.) It's been regularly serviced, with its most recent being on: 22.04.24 Specifications: - Serial No.: MC5765/1 - Exhaust outlet: 20 cm diameter duct connection - Formalin vaporiser external tank Notes: - The fan control button is missing its outer diaphragm, but is operational. - No UV function included.

The biohazard cabinet of Clean Air type EF/A4 is designed for microbiological research with biologic (more)al agents, such as bacteria, viruses and allergens. Thus, this biohazard cabinet is suitable, inter alia, for culturing cells and for transfecting cells under sterile conditions. The Clean Air EF/A4 generates a sterile air flow in the cabinet, keeping the material of the cabinet free from contamination and contamination (product protection). In addition, the downflow provides reasonable protection against cross-contamination of experiments. Furthermore, the intake of air from the laboratory room ensures that an inwardly directed protective air curtain is formed at the front of the cabinet, which serves as a personal protection. Downflow HEPA filter (EN 1822): 12P6 + Exhaust HEPA filter (EN 1822): 4P4 UV wave length: 253 nm Dimensions prefilter: 445 x 1150 mm Interior dimensions (WxDxH): 1200 x 575 x 750 mm Dimensions (WxDxH): 1330 x 835 x 1550 mm Frame height: 750 mm Weight: 200 kg

Exhaust Filter: 292 mm, 99.995% Efficiency at 0.3 Micron HEPA Filter Seal Type: HEPEX Zero Leak Neop (more)rene Seal, Spring-loaded Lighting: LED and UV Supply Filter: 376mm, 99.995% Efficiency at 0.3 Micron Work Access Opening: 254 mm Height Support Frame: 673 – 825 mm Interior Dimensions (HxWxD): 716 x 1177 x 659 mm Exterior Dimensions (HxWxD): 1495 x 1361 x 781 m Weight: 218 kg

Gilson HPLC System 119 UV/VIS Detector - 305 Pump - 506C - 811C - 805 This was removed from a univer (more)sity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonable cosmetic condition with minor marks. Included are; Gilson 119 UV/VIS DetectorSN - 109M6D135Powers on - UV Lamp Hours - 3417/VIS - 880 Hours Gilson 305 Pump SN - 168234Powers on Gilson 506C System Interface ModuleSN - 369H7PA315Powers on Gilson 811C Dynamic MixerSN - 369E6T062 Gilson 805 Manometric ModuleSN - 169434Powers on Gilson UniPoint System Software Users GuideGilson UniPoint Documentation Version 5.1Box full of parts/consumables - Too many to catalogue

Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul Volume Range 0.1-2.5uL Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 2.50/3.00/12.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Designed to achieve precise temperature stability and uniformity with an easy-to-use touch screen co (more)ntroller. A 2 block model with broad range of heat blocks and a wide temperature range of ambient +5°C to 130°C, you’re sure to find the dry bath to fit your application demands. The Thermo Scientific Touch Screen Dry Bath/Block Heater includes advanced features such as a timer, programmability with the ability to save up to 10 programs with 5 steps per program, and an optional external temperature sensor (not included) to control the heat setting by a real time sample read out. Temperature Range: Ambient +5°C to 130°C (Ambient at 25°C) Heating Rate: ≤ 20 min (30° to 130°C) No. of Blocks: 2 (28 x 1.5 ml block) Temperature Accuracy: ≤ ± 0.5°C Temperature Uniformity: ≤ ± 1°C Timer: 0 to 99:59 min or continuous Dimensions (LxWxH): 403 x 200 x 100 mm Weight: 3.7 kg

PS R2.H series balances redefine the level of standard precision balances. Not only do they share al (more)l the features of R series balances, but can also work in adverse operating conditions (condensed dust, drops of water falling down at different angles typical for IP 54). LCD display These balances are equipped with innovative LCD display allowing for clear and legible presentation of a measurement result. Moreover, it offers new text line which supplies the user with some additional messages and information, e.g. product name or tare value. Interfaces Additional asset of PS R2.H balances are their interfaces build-in a hermetic closed housing which is separated from the balance. The interfaces include 2×RS 232, USB type A, USB type B, and Wireless Connection optionally. Balance housing is made of plastic, whereas its pan of stainless steel. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.