Nuaire NU-440-600E Biological Safety Cabinet

This Envair Bio 2 Class 2 Microbiological Safety Cabinet was removed from a laboratory where it was  (more)surplus to requirements. The unit powers up and the airflow and light is working. The UV is not working. Cabinet dimensions - D70 W125 H139cmFrame dimensions - D61 W122 H83cmInternal workspace dimensions - D56 W106 H71cm The item is in a reasonable, used cosmetic condition.

The Esco Infinity Class II Biological Safety Cabinet (BSC), model FC2, offers superior protection to (more) the cabinet operator, product and the environment. With over 20 years of experience in safety cabinet technology, the Esco FC2 cabinet brings you the optimum combination of safety, performance and serviceability with an enhanced ergonomic design. Class II cabinets provide product, operator and environmental protection making them suitable for general microbiological work with agents assigned to biosafety levels 1, 2, and 3. With their diverse range of applications, class II cabinets are the most cost-effective systems on the market. The Infinity Class II BSC is designed, built and tested to comply with Australian Standard AS 2252.2 performance requirements and European Standard EN12469. External Dimensions (LxWxH): 1420 x 805 x 1535 mm Internal Work Zone (LxWxH): 1260 x 610 x 670 mm Tested Opening: 175 mm Inflow Initial setpoint: 1.10 m/s Downflow Initial setpoint: 0.41 m/s HEPA Filter Efficiency: >99.99% at 0.3µm Sound According to EN12469: <65 dBA Fluorescent Lighting: >1200 Lux, measured at work surface level (zero background) as per NSF49 test grid UV-interlock ensures that the UV lamp is deactivated when the sash is not fully closed. Main Body Construction: 1.2mm thick gauge electro-galvanised steel with Isocide anti-microbial white oven-baked epoxy-polyester powder-coated finish Net Weight: 298 kg

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

This Labcaire Class II Biological Safety Cabinet&nbsp;Model - BH12 was removed from a university lab (more) where it was surplus to requirements. The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included. It is in reasonably good cosmetic condition internally and externally. Inside dimensions - D63 W120 H70cm Hours - 1078 1.2

Thermo Fisher Class 2 Safe 2020 1.5 Biological Safety Cabinet This item was removed from a universit (more)y lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 64 x 120cm Includes:-Manual-Stand for unit

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab This item was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 180cm Unit height with stand: 226cm Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand. Socket tester not included.

This Bio-Rad Universal Hood II Imaging System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but the firewire camera has not been tested as it requires a PC with a firewire port. Included are; 1 x Bio-Rad Universal Hood IIPowers on with both white &amp; UV lights working. 1 x &nbsp;Digital camera with motorised lens and connection leads.The power supply unit&nbsp;for the camera does work and the camera powers on. The casing has a tape repair. Overall it is in good cosmetic condition with minor marks from use.

Nikon BioStation Controller BS-ERG 810240 Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and goof mechanical order, we are unable to test it further at our facility.

This Solartron Mobrey 1286 Electrochemical Interface was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has marks from age and use.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database &ndash; access to databases Function &ndash; access to basic functions F1 and F2 &ndash; programmable function keys and menu navigation keys Reports &ndash; access to database of drying process reports Profile &ndash; access to parameters settings Sample &ndash; access to products database

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump HeadFeatures - Utilizes (more) positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump Head includes: - Selected High Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty