Kojair BioWizard Golden GL-130 Biological Safety Cabinet

Nuaire Class 2 Biological Safety Cabinet NU-437-400S This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

BioiMAT1 Ducted Exhaust Type Class I Microbiological Safety Cabinet 1,500mm Wide This item is sold o (more)n behalf of a Client. It is surplus to requirement. It is in brand-new condition and remains in its original packaging. Specifications; - Compliance with BS EN 12469:2000. - Exhaust type cabinet with single H14 EN1822 standard HEPA filter exhaust (99.999% efficiency). - Anti blowback damper. - Photometer access at the exhaust HEPA filter discharge side. - Cabinet width of 1500mm. - Fit into a room with a ceiling height of 2.35 meters, with a 250mm clearance. - Manually operated, downward-opening front visor of 5mm toughened glass. - 100% sealable night door/closure panel. - Manual shut-off damper. Further information regarding the items specifications is available on request. This item is available for collection from Dundee, UK, but we may be able to offer shipping for an additional fee. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Selecta PREBATEM TFT refrigerated incubator. Digital. 36 L capacity. Temperature range from 5 ºC to  (more)60 ºC. Stability ±0.1°C, homogeneity ±0.3ºC. Forced ventilation. Microprocessor control. Two shelves. RS 232 output. Safety thermostat. Dimensions (W*H*D): external 650*600*490 mm; internal 400*300*300 mm. 54 kg. User manual. The Selecta PREBATEM TFT refrigerated oven for adjustable temperatures from 5°C to 60°C is used in thermal treatments of samples for drying, curing, cultivation or conservation at constant temperature. It is suitable for applications in biotechnology, bacteriology, plasma fractions, biology, enzymatic test, metrology, cosmetics, water analysis, among others.

Pre filter: G3 (EN 779), 1760 x 445 mm Donflow filter: Astrocell HEPA 18P6+, 610 x 1830 x 69 mm, H14 (more) acc. EN 1822 Exhaust filter: Astrocell HEPA 7P6, 762 x 610 x 69 mm, H14 acc. EN 1822 Average downflow speed (work mode): 0.36 m/s Average downflow speed (standby mode): 0.10 – 0.20 m/s Average inflow speed in whole front aperture: >0.5 m/s Exhaust airflow 600 m³/h Lighting: TL-high output and UV-C Front aperture (work mode) (HxW): 165 x 1800 mm Front aperture maximum height: 350 mm Interior dimensions (HxWxD): 725 x 1800 x 605 mm Exterior dimensions (HxWxD): 1552 x 1943 x 844 mm Support frame height: 745 mm Weight: 315 kg

Exhaust Filter: 99.995% Efficiency at 0.3 Micron HEPA Filter Seal Type: HEPEX Zero Leak Neoprene Sea (more)l, Spring-loaded Lighting: Halogen and UV Supply Filter: 99.995% Efficiency at 0.3 Micron Work Access Opening: 254 mm Height Support Frame: 673 – 826 mm Interior Dimensions (HxWxD): 724 x 1788 x 597 mm Exterior Dimensions (HxWxD): 1524 x 1972 x 841 m Weight: 308 kg

Exhaust Filter: 99.995% Efficiency at 0.3 Micron HEPA Filter Seal Type: HEPEX Zero Leak Neoprene Sea (more)l, Spring-loaded Lighting: Halogen and UV Supply Filter: 99.995% Efficiency at 0.3 Micron Work Access Opening: 254 mm Height Support Frame: 673 – 826 mm Interior Dimensions (HxWxD): 724 x 1178 x 597 mm Exterior Dimensions (HxWxD): 1524 x 1362 x 841 m Weight: 227 kg

Digital Display, Total Control of Operations AREX Digital PRO is the evolution of our best-seller, t (more)he most advanced tool available to date. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). The SpeedServo ™ system ensures a constant speed even when the viscosity varies (counter-reaction). AREX Digital PRO offers the most advanced technology, being equipped with digital displays to set and monitor both stirring speed and temperature constantly and with absolute precision. Temperature regulation of the liquid being processed with an external probe AREX Digital PRO includes the VTF Digital Thermoregulator, for perfect and precise thermoregulation up to 300°C, with a premium precision of ±0.5°C which allows unsupervised operation thanks to the on-board timer. AREX Digital PRO can also support Pt100 external probe, you can find the complete package here. Previous model video: Maximum Temperature Homogeneity The particular CerAlTop™ plate, in aluminum alloy coated with a ceramic layer, ensures a formidable homogeneity of the temperature over the entire surface of the plate itself, up to 370°C and at the same time an excellent resistance to chemical agents and ease of cleaning. Maximum Protection, IP 42 AREX Digital PRO magnetic stirrers guarantee a high level of safety and protection for the user. The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. AREX Digital PRO can be programmed with a maximum safety temperature, for some particular applications that require specific temperatures and in order to prevent unpleasant situations. In addition, the electronic board activates a high temperature warning ('Hot Plate Warning') which remains active even with the instrument off, when the plate temperature is above 50°C. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design AREX Digital PRO offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use and make it clear that the digital displays indicating speed and temperature can be read. Greater Versatility with the new MonoAlublock™ and MultiAlublock™ The MultiAlublock™ and the new MonoAlublock™ made of aluminum are ideal for carrying out numerous agitation and heating analyzes, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, you can choose the mix that best suits your needs.

This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector cha (more)nnel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method.

Eppendorf 4 x 9-15ml Adapters, Cat. # 022639129 New in box Eppendorf 4 x 9-15ml adapters (Cat. # 022 (more)639129) for round 85ml buckets with the A-4-38 rotor. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 9-15ml Adapters, Cat. # 022639129 includes: - Full 6 Month Parts and Labor Warranty

LARGE BOXES FOR THE TRANSPORT OF BLOOD PRODUCTS, TEST TUBES AND DRUGS Easily accessible features - T (more)he special transport containers of B Medical Systems are made of polyethylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light. - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates Storage capacity (gross volume of bags): 26 (450ml) / 40 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 109 h at 43°C outside: up to 74 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.