Clean Air EF/A6 Biological Safety Cabinet

The EF is a class II biological safety cabinet. The EF offers the user the possibility to work safel (more)y with bioagents under sterile conditions, via the work opening, without complete physical shielding of the experiment. Average downflow (in working position): 0.36 m/s ±0.05 Average downflow (in standby position): 0.10 – 0.20 m/s Average inflow at the top of the working opening (in working position): 0.28 m/s Average inflow through the entire working opening (in working position): > 0.5 m/s Air exhaust (in working position): 400 m³/h ± 25 Sound level: < 57 dB A Lighting: 2x TL-high output (white – No. 840) Lighting intensity: 1000 Lux UV lighting type: UV-C UV lighting wavelength: 253 nm Pre-filter: G3 (EN 779) (1150 x 445 mm) Downflow filter: Astrocell HEPA 12P6+ (H14 acc. EN 1822) (610 x 1220 x 69 mm) Emission filter: Astrocell HEPA 4P4 (H14 acc. EN 1822) (457 x 457 x 69 mm) Working opening in working position (HxW): 165 x 1190 mm Maximum working opening: 350 mm Working surface (WxD): 1109 x 440 mm Dimensions (WxDxH): 1333 x 844 x 1552 mm Height including base: 2297 mm Weight: 255 kg

The laminar flow biological safety cabinet, (LFBSC) is a product resulting from the development of t (more)he laminar flow principle and the application of enviromental controls as required in the field of biological research or chemical containment. The LFBSC, when used with proper technique, is an effective laboratory aid in obtaining the optimum control over product quality while reducing the potential for exposure of both product and personnel to airborne biological and particulate chemical agents in low to moderate risk hazard research and drug preparation. Inflow velocity: 0.53 m/s Dimensions (HxWxD): 1600 x 1362 x 835 mm Internal dimensions (HxWxD): 724 x 1178 x 597 mm Weight: 227 kg

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow &amp; CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E &nbsp;Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light &amp; UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions -&nbsp;D54 W106 H70cm

Thermo Fisher Safe 2020 1.2 Class 2 Biological Safety Cabinet This item was removed from a universit (more)y lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV and window up/down function properly. It was last serviced in April 2024. It is in good cosmetic condition with some minor marks from use. Safe Working area 64 x 120cm Includes:-Manual-Stand for unit Socket tester not included.

Funnel heater 90/125 MODERN SCIENTIFIC EQUIPMENT Reference: 5033.0090 Capacity: 90 / 125 mm Power su (more)pply: 230V - 50/60Hz Power 150W

Made of transparent plastic, protects the balance display against possible scratches, dirt, etc. Des (more)igned for X2 PLUS and R2 PLUS balances. Set - 10 pieces.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device&#39;s high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal&#39;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.

Eppendorf 3 x 13 x100mm Adapters for F-34-6-38, Cat. # 022637282 The Eppendorf 3 x 13 x100mm Adapter (more)s for F-34-6-38, Cat. # 022637282 is for use in the Eppendorf 6x100ml high-speed fixed-angle rotor F-34-6-38. For use with Eppendorf 5804/R and 5810/R centrifuges. There is 1 adapter per set. INCLUDED: The Eppendorf 3 x 13 x100mm Adapters for F-34-6-38, Cat. # 022637282 includes: - Full 6 Month Parts and Labor Warranty