Amelung coagulation analyzer

This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector cha (more)nnel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method.

ACL 100 coagulation analyzer developed by Instrumentation Laboratory (IL) is aimed to provide optimu (more)m efficiency for performing coagulation testing at health care centers, physicians’ offices, and small laboratories. The latest advancement of IL, the ACL 100 is an ideal choice for low volume workloads and to serve as a backup analyzer. It is a fully automated clot end point analyzer with a processing throughput of 110 tests per hour for PT and Fibrinogen. With the use of this system, you can yield quantitative clottable Fibrinogen result with every PT automatically, without any need for additional steps or reagents. This system is also effective to perform clotting assays such as Lupus and APCR-V Leiden. It offers the convenience of attaining dependable and reliable results for test such as PT-fibrinogen, APTT, TT, Protein C and Protein S assays, and factor assays. Samples can be analyzed in single, batch, duplicate and single menus, and can produce the results for PT, APTT and fibrinogen on four samples within ten minutes, allowing up to 24 test results as well as another 32 optional calculations. Besides these, there are other benefits such as minimum maintenance requirements, convenience, and keyboard for simple patient identification data entry etc.

4 measuring channels Weight: 6.3 kg Dimensions (wxhxd): 35.5 x 12 x 45 cm 220-240V, 50-60 Hz, 45 VA, (more) 0.4 Med 6 V See documentation for more information.

SEVENGO DUO SG78 portable pH meter, METTLER TOLEDO New equipment in its original packaging pH accura (more)cy: ±0.002 Type: Portable pH range: 0 to 14 Redox range (mV): ± 1999 Conductivity Range: 0.01 µS/cm to 1000 mS/cm TDS range: 0.01 mg/l to 600 g/l Resistivity range: 0.00 to 100.00 MΩcm Salinity range: 0.00 to 80.00 ppt T° range (°C): -5 to +130 Power supply: 4 AA 1.5 V batteries / NiMH 1.3 V accumulators Weight (g): 325 (without batteries) L x D x H (mm): 220 x 90 x 45 Delivered with batteries, handle, instructions for use, inspection certificate and declaration of conformity, and protective cover Without electrodes

Eppendorf MasterCycler Nexus SX1 thermal cycler with fast silver block. Flexlid Concept capable of a (more)ccommodate all kind of PCR tubes and plates with a sample capacity of 96 × 0.2 mL PCR tubes, strips or 1 PCR plate (96 wells). Heating and cooling technology by Peltier elements. Temperature Range from 4 to 99 °C, with an accuracy of ± 0.2 °C and uniformity of ± 0.3 °C. Heating and cooling rate of max. 3°C/s. No gradient capacity. Heated lid 37 – 110 °C with Output USB, Ethernet, CAN in, CAN out. Dimensions (HWD): 320*410*250 mm; 11,2 kg. User manual. The Eppendorf MasterCycler Nexus SX1 thermal cycler provides scientists with flexibility with a silver block for increased speed that can accomodate several standard tube types from 0.2 mL tubes to 96 well plates, there is no need to buy additional blocks. It also provides robust thermal cycling in a compact footprint with intuitive graphic control.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

KNF VC 900 Vacuum Controller, 100-240V Measurement Range 0 to 1100 mbar Measurement Accuracy ± 1 mb (more)ar Protection Class IP30 Features - Simple, versatile vacuum control with digital display - Simple, intuitive operation - Compatible with virtually all diaphragm vacuum pumps - Four different operating modes - Enables variable speed control and automatic pressure detection when paired with KNF N 920 G, N 820 G and N 840 G pumps - USB interface for PC control - Separate control unit with pressure sensors and two-step controlled valve to be placed independently from the operating unit The KNF VC 900 Vacuum Controller, 100-240V is an independent control unit for any vacuum source. Features a touchscreen control, pressure sensors, and a two-step-controlled valve. Optimizes lab bench space by allowing hands-free operation of the central vacuum unit. INCLUDED: The KNF VC 900 Vacuum Controller, 100-240V includes: - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment LTB 2602I Luna Precision Balance, 2600g, 0.01g Capacity 2600g Readability 0.01g Repe (more)atability 0.02g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LTB 2602I Luna Precision Balance, 2600g, 0.01g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty