Refrigeration thermostat KT 18-42 FRYKA

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD C model - For tanks of 320 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Calibration and regulation of temperatures from -25 to 200°C with LAUDA calibration thermostats The  (more)ECO calibration thermostat is designed for the specific needs of laboratories that carry out calibration and regulation work on a daily basis. The equipment was specially developed for the precise calibration of thermometers, such as industrial platinum resistance thermometers, temperature probes, thermocouples or electrical thermometers. Liquid calibration baths are considered the most stable temperature source and offer the greatest consistency for comparative calibration of temperature probes and sensors in a laboratory. LAUDA calibration thermostats are specially equipped for the calibration of glass thermometers or electric thermometers; they are an ideal solution compared to heat cabinets and metal block thermostats, as these thermostats transfer heat into the thermoregulation liquid 40 to 60 times better than through the air. The LAUDA ECO REJ 1225 G calibration thermostat is ideal for calibrating glass thermometers or electric thermometers. DISPLAY AND CONTROL The thermostat can be easily and flexibly integrated into your existing work processes thanks to a variety of interfaces, including Profibus, Ethernet or Pt100/LiBus. The large color TFT display offers a clear overview at a glance and allows you to program a variety of temperature curves, which are automatically processed by the thermostat to support your daily laboratory work. - Color TFT display for simultaneous indication of actual and set values ​​and temperature profile graph - Intuitive menu navigation in simple language - Simple entry via cursor and function keys. Additional Tmax button for overtemperature protection - Fully electronic stepless controller with PID action - USB interface as standard - Upgradeable with Pt 100/LiBus module for external control and remote control via command console - Programmer with 150 temperature/time segments separable into 5 programs CONSTRUCTION AND BATH - Thermostatic calibration bath with the latest microprocessor technology and integrated cooling system - Safety class III for operation with flammable and non-flammable liquids. - Too high temperature protection adjustable via menu - Pump with six adjustable power levels - Easy flow control between internal and external circulation - 2 separate chamber design for a constant level in the thermostating chamber - Vertical adjustment for calibration chamber overflow - Stainless steel bath with drain valve Why LAUDA thermostats? Calibration applications require thermostats that maintain a constant, temperature-independent liquid level. To achieve this, LAUDA uses a two-chamber tank, the temperature chamber and the operation chamber, also known as the usable space or buffer chamber. A unit pumps fluid from the heat chamber to the application chamber where, if it is overfilled, it has the potential to overflow back into the heat chamber. The cylindrical working chamber is height adjustable, which makes it possible to adjust the immersion height. The thermometers, completely immersed, can therefore be read directly at the point of immersion. Furthermore, the separate calibration chamber ensures constant immersion depth, regardless of liquid volume expansion, excellent temperature stability of ±0.02 K and homogeneous temperature distribution. Standard accessories - 2 screw caps, 2 closing caps - 1 bath cover Performance graph of the pressure pump on the six levels. GREEN TECHNOLOGY The LAUDA ECO calibration thermostat uses refrigerants compliant with the European regulation on fluorinated gases. Furthermore, the REJ 1225 G is optionally available with natural refrigerants.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Thermo Fisher Scientific Evolution 350 UV-VIS Visible Photospectrometer. The  (more)unit is in full working condition and is ready for immidate realese. For routine, complex research and advanced applications, including current compliance, the Thermo Scientific Evolution Pro UV-Vis Spectrophotometer series brings together reliable, versatile hardware, a broad range of accessories, with easy-to-use, easy-to-learn Thermo Scientific Insight Pro Software. Easily go from sample to final report - with intuitive INSIGHT Pro Software guiding you every step of the way. Obtain results you need for quantitative analysis, scanning and kinetics applications with comprehensive software tools for data collection, processing, and reporting. Customize even complex methods with ease using workflow-oriented application modules. Enforce data security with optional INSIGHT Pro Security Software tools to assist with achieving current 21 CFR Part 11 compliance in your pharmaceutical lab. Baseline Flatness:±0.0015 A (200 to 800 nm), 2.0 nm SBW, smoothed Beam Center Height:8.5 mm Description:Evolution 350 Spectrophotometer Detector Type:Dual Matched Silicon Photodiodes Dimensions (L x W x H):53 x 61 x 38 cm (20.8 x 24 x 14.9 in.) Light Source:Xenon Flash Spectral Bandwidth:0.5, 1.0, 1.5, 2.0, 4.0 nm Selectable Wavelength Range:190 to 1100 nm Drift:<0.0005 A/hr., 500 nm, 2.0 nm SBW, 2 hr. warmup Electrical Requirements:100/240 V, 50/60 Hz For Use With (Application):Academic, Chemicals, Food & Beverage, Chemicals Environmental,Industrial QA/QC, Material Science, Pharmaceuticals Lamp Life:>5 years or longer if not using live signal Noise:Photometric0A: <0.00018 A,1A: <0.00022 A,2A: <0.00050 A,500 nm, 2.0 nm SBW, RMS Optical Design:Modified Ebert; Double beam with sample and reference cuvette/accessory positions Pharmacopoeia Compliance Testing:Wavelength Accuracy: ±0.3 nm 190–900 nm Wavelength Repeatability: SD 10 meas. <0.1 nm Absorbance Accuracy: <±0.010A at 1A, <±0.010A at 2A Absorbance Repeatability: ±0.0025A @ 1A Stray Light: 198 nm with KCl >2A, 220 nm with NaI >3A, 300 nm with acetone >3A, 340 nm with NaNO2 >3A Resolution: Peak/trough ratio >1.8 @ 1 nm SBW setting Photometric Accuracy:1 A: ±0.004 A, 2 A: ±0.004 A,3 A: ±0.006 A Photometric Display:±6 A Photometric Range:>4 A Photometric Repeatability:1 A: ±0.0025 A Scan Ordinate Modes:Absorbance, % Transmittance, % Reflectance, Kubelka-Munk, Log(1/R), Log(Abs), ABS × Factor, Intensity, 1st–4th Derivative Scan Speed:Variable, up to 6000 nm/min. Stray Light:198 nm: 2.4 A KCl 220 nm: 3.5 A NaI 340 nm: 4.0 A NaNO2 Wavelength Accuracy: ±0.20 nm (546.11 nm Hg emission line), ±0.30 nm, 190 to 900 nm Wavelength Data Interval: 10, 5, 2, 1, 0.5, 0.2, 0.1, 0.05 nm Wavelength Repeatability:Standard deviation of 10 measurements <0.05 nm Weight (English):48.5 lb. Weight (Metric):22 kg

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 130 x 120 x 150 (more) mm Weight: 500g

The WLC.X7 series represents a new advanced level for precision balances. The X7 series balances fea (more)ture the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Weighing Data Management The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. WLC.X7 scales are equipped with many communication interfaces: 2 x RS 232, USB type A, USB type B and Wireless Connection. Databases in X7 series balances In new WLC.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 100 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Benchmark Sprint™ 8 Plus Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115VFeatures - 8 Posit (more)ion fixed angle rotor rotor - Ideal for rapid production of serum and plasma - Unique EZ-Scroll™ touch pad - Digital speed control in rpm or rcf with adjustable acceleration and deceleration rates (up to 6,800rpm/4,445xg) - Program storage up to 99 - Adjustable speed and timer The SPRINT™ 8 PLUS Clinical Centrifuge, with its 8 x 15ml fixed rotor, offers a notable advantage over traditional clinical centrifuges. With an increased speed capability of up to 4445xg, it allows for the separation of serum or plasma in as little as 2-3 minutes. With a large back-lit display, high-capacity rotor, and adjustable settings, it provides efficient and user-friendly operation Features such as the imbalance detection system and electrical lid lock ensure safe operation. Additionally, momentary operation capability adds further convenience to the centrifuge's functionality. INCLUDED: The Benchmark Sprint 8 Plus Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115V includes: - 8 x 15mL Fixed Angle Rotor - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller &amp; 6-Position Microplate PlatformThe new  (more)Orbi-Shaker CO2-MP is designed for thorough, mixing of microplates in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 65°C and humidity levels up to 100%.To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller can magnetically mount to the outer walls of the incubator and allows the user to set and adjust the shaker settings without opening the chamber door(s). A 6 position microplate platform is included and secures both standard or deep well plates. Click Here to View Product Video INCLUDED: The Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller &amp; 6-Position Microplate Platform includes: - Rubber Mat Microplate Platform 13 x 12 in - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty