Lauda RE207 Refrigerated Circulator Kälte-Umwälzthermostat -35°C to 200°C RS232

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

Refrigeration thermostat KT 18-42 FRYKA Main features: - Electronic temperature control with LED dis (more)play - Interchangeable circulation pump - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Stainless steel tank - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

LEEC Research CO2 Incubator Model-GA2000 This item was removed from a university where it was surplu (more)s to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition.

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

A&D Weighing ION BM-252 Semi-Micro Analytical Balance, 250 g, 0.01 mg Capacity 250 g Readabilit (more)y 0.01 mg Repeatability 0.03 mg (for 100 g) Features - Easy ION switch allows built-in fan-less internal ionizer to neutralize electrostatically charged objects instantly at no additional costs - Large breeze chamber is flexible enough to adjust to all sample vessels small or large - Anti-static glass coating blocks outside electrical interferences - Auto response adjustment allows balance to auto or manually stabilize FAST, MID, SLOW depending on draft & vibration influences - Built in environmental sensors monitor and display the temperature, humidity and atmospheric pressure - Illuminated back-mounted spirit level bubble helps reduce leveling time and increase accuracy & precision - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Auto Self Calibration will detect changes in ambient temperature and auto calibrate - Data Memory up to 200 points - GLP/GMP/GCP/ISO compliant reports with Manufacturer, Model, Serial, Balance ID, Time/Date, Mass Std, Signature space - Comes standard with USB and RS-232C with Optional Bluetooth and LAN Ethernet Interface with WinCT-Plus software - AD1688 Data Logger hand held device allows storage up to 5,000 pt with time/date and direct output via USB The A&D Weighing ION BM-252 Semi-Micro Analytical Balance offers exceptional precision with a capacity of 250 g and readability of 0.01 mg. It features a built-in fan-less ionizer that neutralizes electrostatic charges instantly, enhancing accuracy without additional costs. The balance's large breeze chamber accommodates various sample vessels, while anti-static glass coating shields against external electrical interferences. Users can tailor response times with automatic or manual stabilization settings (FAST, MID, SLOW) based on environmental disturbances. Integrated sensors continuously track and display temperature, humidity, and atmospheric pressure to maintain optimal conditions. This balance also includes an illuminated spirit level for quick leveling, enhancing accuracy and precision. With one-touch Full Digital Calibration and Auto Self Calibration, it adapts to onsite conditions and ambient temperature changes, ensuring consistent performance. The balance stores up to 200 data points and supports GLP/GMP/GCP/ISO compliant reporting, which includes detailed records such as manufacturer, model, and serial number, alongside calibration and audit details. Additional functionalities include a reverse liquid crystal display, percent weighing, piece counting, and an underhook feature for below-balance weighing. Connectivity options include a standard USB and RS-232C interface, with optional Bluetooth and LAN Ethernet connections via WinCT-Plus software. The AD1688 Data Logger complements this setup by storing up to 5,000 points with time/date stamps for comprehensive data management. A 5-year US warranty guarantees long-term reliability, making the ION BM-252 a superior choice for precise analytical tasks. INCLUDED: The A&D Weighing ION BM-252 Semi-Micro Analytical Balance, 250 g, 0.01 mg includes: - AD-1688 Weighing Data Logger - AD-1689 Tweezers - AX-BM-033 Dust Storage Cover - Weighing Pan - Pan Support - Fine Range Ring - Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The Ultrapac Smart is equipped with a lot of features to make the Ultrapac Smart the exact solution  (more)for your needs! Rely on innovative technology when it comes to high quality compressed air needs even under challenging conditions. Validated performance and a  complete new defined dryer concept designed to last. Nominal flow inlet: 5 m³/h Regeneration air averaged: 0.85 m³/h Outlet: 3.95 m³/h Operating pressure: min 4 bar – max 16 bar Media: Compressed air / Nitrogen Dimensions (WxDxH): 314 x 114 x 497 mm Weight: 10 kg

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.