LAUDA PRO P 20 C heating thermostat

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB C model - For tanks of 200 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Heating thermostat from 40°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature control range: -5°C to 99°C Usable temperature range: from 30°C below room temperature t (more)o 99°C Temperature accuracy for 0°C: ±1.0°C 37°C: ±0.5°C 90°C: 1.0°C Heating rate: 5°C/min Cooling rate simple temperature operation: 6.0°C/min between 99°C and 25°C 1.5°C/min between 25°C and -5°C Temperature deviation across blocks: Max 0.2°C Dimensions (WxDxH): 220 x 250 x 125 mm Weight: 5 kg Excluding block

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  plexiglass windows o the door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard!     Inner chamber in aluminum for better heat transport.

This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full wor (more)king condition and is ready for immidate realese. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 liters per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

The device has 4 digestion places (suitable for 4 digestion glasses size (48 x 260 mm) – arranged in (more) a row – and is equipped with special infinitely adjustable (scale 1 – 10 or power controller 0 – 100%) infrared heating dome with high heating output, which ensures a quick and complete ashing of the product material.

Dionex IC25 Ion Chromatograph This was removed from a university lab where it was surplus to require (more)ments. The unit has been professionally serviced and is in good working order. It is in good cosmetic condition with minor marks from use.