Weiss Technik WETK 0130 Climate Cabinet

Manufacturer: Binder Model: KBF 720 E5.2 Technical data: Temp MAX: 70 °C Temp MIN: 0 °C Volume: 700  (more)litres Sterile: No Width: 890 mm Width/inside: 576 mm Height: 1925 mm Height inside: 1250.0 mm Length: 1250 mm Depth: 1250 mm Depth inside: 973 mm Number of shelves/ grids: 2 Operation via touchscreen Weight: 309 kg Length inside: 973 mm Voltage: 230 V Interface type: USB|Ethernet Heaters and heating cabinets Features: with overheating protection|with infinitely variable temperature control|with internal glass door|with certification|with timer|with interface|with cooling|with data logger Power: 3100 W Type of convection: Natural Temperature accuracy: +/- 0.2 °C Incubator type: without CO2 supply Humidity range: 10 % r.h. to 80 % r.h. Material inside: Stainless steel Door suspension side: right|left Installation variants: stand-alone Type of temperature control cabinet: Constant climate control cabinet The appliance/system offered here has been tested and is fully functional and ready for use.

CABINET CSB60UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm th (more)ick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Equipped with a rotating barrel with external gas connection. Temperature range: 15°C – 45°C Humidit (more)y range: 0 – 98% rH Diameter barrel: 375 mm Dimensions (HxWxD): 2135 x 1380 x 1080 mm Internal dimensions (HxWxD): 790 x 800 x 725 mm

IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling Measuring Range Max. 40000 J M (more)easuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The C 200 auto package allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming to standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 Calwin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. Calwin is sold separately. INCLUDED: The IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling includes: - C 200 Measuring Cell - C 5010 Decomposition Vessel - C 248 Oxygen Filling Station - RC 2 Basic Recirculating Chiller - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V Temperature Range -10°C to 60°C w/o H (more)umidity (+10°C to 60°C w/ Humidity and/or Light) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Integrated illumination box with programmable daylight (6,500 K) and UV light for precise light control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750L is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750L is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. The ICH750L model includes an advanced illumination box integrated into the upper interior, equipped with fluorescent lamps providing cold white light (daylight: light color 865, 6,500 K) and UV radiation within the 320 to 400 nm spectral range. This setup replicates standard light D65, essential for tests that require precise light conditions. Both daylight and UV light can be individually programmed through the controller, offering tailored adjustment for specific testing needs. Light intensity is maintained with high accuracy, at ± 6% for cold white light and ± 10% for UV light, ensuring consistent conditions for reliable test results. INCLUDED: TheMemmert ICH750L Stability Climate Chamber w/ Light 749L, 115V includes: - Illumination Box - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

SpeedVac concentrators are designed with an integrated miniature design to save bench space, making  (more)it ideal for laboratories with a limited working area. Researchers and laboratory personnel will appreciate the quiet operation of this concentrator when working on complex and critical experiments that require utmost concentration. The DNA 120 SpeedVac concentrator is a robust system for technical DNA/RNA drying needs. Small-volume samples can be efficiently processed by this model. As a successor of the DNA 110 SpeedVac concentrator, DNA 120 units are equipped with the same features and a couple of innovations. Dual digital timers that allow for the independent controlling of heat and run times were added to DNA 120 concentrators. This model is the fully programmable version of the DNA 110 SpeedVac concentrator system. Capacity (Metric): 4L Chamber Material: PTFE Voltage: 240V Displacement: 31L/min. at 50Hz ; 36L/min. at 60Hz Electrical Requirements: 240V 50Hz Temperature Range (Metric): -55°C Max. Vacuum: 7 torr (9 mbar)

Beckman Coulter 6015 MET ONE 6000P Remote Airborne Particle Counter Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also included are the following: Hammond Manufacturing metal Lockable case with vent holes P/N - SP2001942ST161608SS Meissner Filtration Products CF2SM0.2-41B1S/N - Z8803278 Phoenix Contact KGG-MC 1,5/8 UK, Euro & USA Power Supply Cables.

TTP Labtech Mosquito X1 Low Volume Hit Picking Liquid Handling System This unit has been professiona (more)lly recertified and is in full working order. It will need to be calibrated with samples upon installation. It is in excellent cosmetic condition with minor marks from use. Included with it are;1 x Dell Laptop (has Mosquito software installed) 1 x Mosquito Control Software Version 3.11.0 Disc (Includes manuals)1 x Mosquito Quick start guide2 x Boneco Humidifiers with power supplies

IKA MF 10.2 Mill Impact Grinding Head For crushing brittle, hard materials such as minerals, buildi (more)ng materials up to Mohs hardness 6. Before being discharged, the ground material passes through a sieve. This sieve is interchangeable and available in different hole sizes (not incl. with delivery). The ground material can then be collected using an NS 29 standard ground vessel. INCLUDED: The IKA MF 10.2 Mill Impact Grinding Head includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty IKA MF 10.2 Mill Impact Grinding Head Specifications Process typeinlineCircumferential speed max.34 m/sFeed hardness max.6 MohsFeed grain size max.10 mmMaterial milling chamberstainless steel 1.4308Mill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)320 x 450 x 300 mmWeight2.942 kgRequest a Formal Quote

Eppendorf 18 x 5ml Adapters, Cat. # 022638718 Eppendorf 18 x 5ml Adapters, Cat. # 022638718 for A-4- (more)81 rotor. This is a 2 piece set, and the adapters are new in the packaging. The rotor compatible with the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf 18 x 5ml Adapters, Cat. # 022638718 includes: - Full 6 Month Parts and Labor Warranty