Waters NanoACQUITY UPC2 UPLC Acquity Chromatography System Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Dionex UVD 170S UV/VIS Detector was removed from a university lab where it was surplus to requi (more)rements. The unit powers up but has not been tested further at our site. It was last used over a year ago and the lab manager believed it to be in working order. It is in reasonably good cosmetic condition but has some marks from use. There is a folder with the operating instructions included with it.

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

Varian Gas Chromatograph Model - 431-GC This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

System consists of: PAA KiNEDx arm Peak Analysis 1M linear rail Peak Analysis CS-10 carousel with st (more)acks 2 Microplate stackers Software As-is, no warranty

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.

MY11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the MYA microbalance. Set content: weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Vessel capacity: 11 ml Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Motic PA53MET-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illumination O (more)bjectives S-APO 5X, 10X, 20X, 50X Objectives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities minimize fatigue during extended periods of operation. - Innovative Module Design - The compact size of the PA53-MET minimizes required installation space. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. This upright compound is a versatile materials microscope that can image industrial samples with high optical quality. Reflected Light and Transmitted Light can be used simultaneously for unique samples when needed. This microscope can be upgraded to a motorized stage for Low Magnification Tiling of large samples. INCLUDED: The Motic PA53MET-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illumination includes: - S-APO S-APO 5X, 10X, 20X, 50X Objectives - Widefield (FN25) eyepiece 10X/25mm - 4x4 inch right hand stage with metal stage plate - PA-25ND6 neutral density filter and PA-25LB LBD filter - Widefield (FN25) eyepiece 10X/25mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark IPS7000-10 MHS-10 10-Position Hotplate Stirrer The Benchmark Multi-Position Hotplate Stirr (more)ers provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Two models are available, offering either 5 or 10 stirring positions. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. INCLUDED: The Benchmark IPS7000-10 MHS-10 10-Position Hotplate Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty