Thar / Waters SFC CO2 Chromatography System - Waters 2998, 2424. Thar 840, 06298

Pharmacia LKB FPLC System This was removed from a university lab where it was surplus to requiremen (more)ts. The system powers up and is in good cosmetic condition Included are; 1x Controller LCC-500 PlusS/N: X D 00197 1x Fraction Collector Frac-100S/N: 56100982 F3 005939 1x Pump P-500S/N: 56102694 E5 012109 1x Single Path Monitor UV-1 Optical UnitS/N: 226622 1x Single Path Monitor UV-1 Control UnitS/N: 221274 1x Whatman Filter paper pack of 1002x Filter Kit 280m2x bag of adapters6x thermal paper

Varian Gas Chromatograph Model - 431-GC This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This item has just arrived in our stock. Please enquire for further details.

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition with only minor usage marks. We have been able to connect the unit to the PC, but unable to test it further. It will likely require servicing before it is used. PC Equipment:-Dell Optiplex GX280 with Dell Monitor, keyboard and mousePSC QS6000 Plus Barcode Scanner PC has the following software:-Applied Biosystems 7900HT Version 2.3 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2 External dimensions -D85 W54 H76cm

Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V Temperature Ran (more)ge Ambient +15°C to 260°C Temperature Distribution Accuracy Forced Convection: ± 2.5°C (at 260°C) Natural Convection: ± 3°C (at 120°C) Chamber Volume 90L Features - Two types of circulation, forced and natural convection, in one unit (compatible with model 300/400/600) - Eco-oven with improved air velocity control system and adjustable damper - Program featured to reduce power consumption significantly - Superior heat tightness and insulation of chamber - Excellent dust tightness, dust can hardly enter the chamber - Air velocity changeable in 10 stages using digital setting of controller - Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions - Adjustable damper position at chamber front to optimize operation - Fluorescent display, interactive input method, calibration off-set function High-performance, energy-saving, programmable 90L constant temperature oven with two types of circulation (forced and natural convection) in one unit. Program featured to reduce power consumption significantly. Superior heat tightness and insulation of chamber. Excellent dust tightness, dust can hardly enter the chamber. Air velocity changeable in 10 stages using digital setting of controller. Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions. Adjustable damper position at chamber front to optimize operation. Fluorescent display, interactive input method, calibration off-set function. Operating temp ambient +15~260°C. INCLUDED: The Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.)cu.ft.) Features - 256 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V offers a substantial 256-liter capacity, making it ideal for laboratories that require precise temperature control for larger sample volumes. With a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, this incubator ensures consistent, reliable results across a variety of applications. The energy-efficient Peltier heating and cooling system, along with the ControlCOCKPIT digital PID-microprocessor controller and high-definition TFT-color display, allows for intuitive control and easy monitoring. The SetpointWAIT function ensures the process begins only when the target temperature is reached, enhancing accuracy and performance. This incubator is also environmentally friendly, featuring a refrigerant-free design that maximizes energy efficiency. The durable stainless steel interior and textured stainless steel exterior are corrosion-resistant, ensuring long-term durability in demanding lab environments. With the capacity to hold up to nine shelves and a maximum chamber load of 661 lbs, the IPP260eco is versatile enough to handle a wide range of samples. Safety is paramount, with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and autodiagnostic system for fault analysis, providing peace of mind during operation. This incubator delivers superior performance with a focus on sustainability and reliability. INCLUDED: The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

IKA VACSTAR control Final pressure without gas ballast 2 mbar Pump rate max. (50/60Hz) 22 l/min Inpu (more)t pressure 2 - 1030 mbar Features - Powerful 4-chamber membrane vacuum pump, chemical-resistant and low-maintenance - Integrated vacuum controller with a detachable WiCo controller for versatile operation - Selection of operating modes from automatic to manual, including pumping, evacuation, and cleaning functions - High suction performance at 22 l/min with a minimum pressure of 2 mbar - Achieves a final pressure of 2 mbar without gas ballast, featuring 4 suction levels - Boiling point detection and a comprehensive solvent library for specific applications - Features a venting valve, condensate trap, and emission condenser for enhanced safety - Timer function for scheduled operations with a noise level of 54 dB(A) at low pressure Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance. VACSTAR control is the ideal system with its integrated vacuum controller and removable display. The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function. Integrated vacuum controller with removable controller (WiCo): Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory. INCLUDED: The IKA VACSTAR control includes: - WiCo VACSTAR control - Vacuum hose (1 m) - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB A-B Cable - Screw driver - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Powerful dispersing instrument for volumes from 0.25 – 30 l (H2O) with digital speed display. It off (more)ers a wide speed range from 500 – 10,000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities. Digital speed display Electronic speed control Electronic overload protection Stainless steel dispersing elements can be cleaned quickly and easily Smooth start Error code display Volume range (H2O): 0.25 – 30 l Viscosity max.: 5000 mPas Speed range: 600 – 10000 rpm Speed deviation: 1 % Speed control: stepless Speed display: LED Noise without element: 72 dB(A) Extension arm diameter: 16 mm Extension arm length: 220 mm Dimensions (W x H x D): 115 x 355 x 139 mm Weight: 5.76 kg Including: Tripod 2x S 50 N – G 45 M Dispersing tool Working range: 0,5 – 15 l Stator diameter: 45 mm Immersion depth: 70 – 250 mm Suitable for solvents: yes Max. temperature: 180 °C Sterilization methods: all methods