Thermo Separation Products/Shimadzu HPLC System - AS3000 - P1500 - RF-551 Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

This Agilent Technologies 1200 Series HPLC G1312A Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

HP HPLC System 1100 Series This was removed from a university lab where it was surplus to requiremen (more)ts. The lab confirmed the system was working prior to removal. Included are; 1x Vacuum DegasserPr No. G1322AThe unit powers up and is in good cosmetic condition. 1x Quat PumpPr No. G1311AThe unit powers up and is in good cosmetic condition. 1x ALSPr No. G1313AThe unit powers up and is in good cosmetic condition.

Applied Biosystems MDS Sciex 3200 Q Trap LC/MS/MS System With PC This item was removed from a univer (more)sity lab where it was surplus to requirements. It is in very good cosmetic condition and power on. The system includes:- Dell Optiplex XE2 PC with Windows 10 Operating System (Serial No.: F25L7C2, Year: 2016) - Dell Monitor (Serial No.: CN-0H88WX-64180-58P-1DZL-AOO) - Dell Keyboard KB212-B (Serial No.: CN-04G481-71616) - Dell Mouse (Part No.: LZ533BJ06SS) The PC powered on and loaded Windows 10. The SCIEX Analyst software is installed, but a licence agreement must be obtained to use it. The 3200 Q Trap system powered on, with the cooling fans running. When the LOAD and INJECT buttons were pressed, a pump noise could be heard, indicating the system was pressurising.

Bunsen burners with tubing gas included. With key regulation.

Moxa UPort 1110 converter is a device designed to expand a computer with RS-232 port via USB bus. Wi (more)th this a balance not equipped with the USB interface can be connected to PC.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 200 mg Material: nickel silver M1 Class Mass Standards &ndash; Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

Branson Extension 3/4” dia. With replaceable tip 101-148-009 Branson Extension 3/4” dia. (with repla (more)ceable tip 101-148-009), 108-009-633 for Branson Sonifier SFX250, SFX550, 250 &amp; 450 cell disruptors.INCLUDED: The Branson Extension 3/4” dia. With replaceable tip 101-148-009 includes: - Manufacturer's Documentation Request a Formal Quote