Perkin Elmer Flexar LC Autosampler HPLC Chromatography

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

The ASP2000 is a precision micro-stepping, high torque drive “workhorse” liquid handler Autosampler  (more)that delivers robust performance for fast and accurate sample preparation and direct injection into UV and HPLC systems. The ASP2000 is suitable for a wide variety of applications with the ability to pierce multiple septa with very high accuracy and repeatability. It also has the ability to inject into tiny injection ports. This unique, near-perfect design of hardware and software performs sample processing tasks effortlessly with seamless integration with the IDIS data management system configurations. Including a Icalis DXi-50 pump and a Icalis RS8 remote serial controller.

Intavis AG InsituPro VS Situ Hybridisation Instrument This item was removed from a university labora (more)tory where it was surplus to requirements. Upon powering on, the system initiates and automatically moves to the home position. No further testing has been conducted.The item is in good cosmetic condition. Includes:- Holders for multiple-sized tubes - 1 x complete pipetting needle - 1 x pipetting needle for basket work area - 100 x large incubation baskets - User manual - 16 x reagent bottles Specifications:- Model: INSITUPRO VS - Serial No.: 12 0D5 V290

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation &nbsp;Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Pyromark Q96 Lab station with plastic liquid container

Perkin Elmer Janus G3 Integrator Varispan Deck Liquid Handler This item was removed from a universit (more)y laboratory where it was surplus to requirements. It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal. Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request. Specifications.- Model: Janus G3 - Serial No.: JA2049N3797

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Brand New Leosmak LEO-010 Compact freeze dryer sold through ULMfreezedryers.co (more)mWe are stock holders in UKPrice before VAT - £7,300Are you ready to revolutionize the way you store food? The Leosmak LEO-010 Freeze Dryer is your ultimate solution for preserving the taste, texture, and nutritional value of your favourite foods. Designed for both home chefs and small businesses, this advanced freeze dryer ensures that your meals remain fresh and delicious for months, reducing waste and saving you money.What’s IncludedLEO-010 Freeze Dryer.Drainage hose with connector.1 litre of oil.Spare temperature sensor. Leosmak bag.Operating manual.Catalogue.Features 5 shelves, 5 trays, 0,7 m2 shelf area.Freeze dry 10KG fresh food per batch.GN 1/1 Stainless steel trays.Freezing and heating range: -45°C - +70°C.Short Freeze Drying Time: Our advanced technology ensures efficient and rapid freeze drying, preserving the quality of your food.100% Stainless Steel Construction: Durable, easy to clean, and designed to withstand rigorous use while maintaining hygiene.Washable Chamber: No electrical components in the chamber means easy maintenance and enhanced safety.Plug and Play Operation: Simple setup allows you to start freeze drying immediately, even in a home environment.Low Noise Operation: Designed for quiet performance, making it suitable for home use without disturbing your daily activities.Included Vacuum Pump: Comes with a high-quality vacuum pump to facilitate the freeze drying process.Fully Automatic Process: Set it and forget it! Enjoy hassle-free operation with minimal supervision.Wi-Fi Monitoring: Control and monitor your freeze dryer remotely via our Android or iOS application.Freeze drying of sweets & candies. Dimensions Freeze dryer exterior dimensions: 600mm W x 930mm D x 1070mm H.Perfect for counter top, cart, or table. Weight 157KG. Power Required power supply: 220V, 3,2 kW.Energy consumption: ~7,5 kWh/1kg/standard batch. Shipping Info Shipping dimensions: 120x80x140 cm.Gross weight: 175 kg.Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty Min. 24 months, extendable warranty.

Stuart SB162-3 3-position Hotplate Magnetic stirrer Stirring quantity : 15 L (water) at each positio (more)n Speed range : 100 – 1.500 rpm Max. Temperature : 325°C Top Plate dimensions : 160 x 160 (at each position) Top Plate material : Al/Si alloy Weight : 11,0 kg Dimensions : W600 x D270 x H110 230V | 50Hz | 2200W This unit is in excellent working condition and very clean cosmetically. It has been tested. Feel free to contact with any questions.

Finnigan MAT LCQ Mass Spectrometer System This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks Includes:1 x Spare System Control Board, ASSY No. 97000-61350&nbsp;1 x Probe14 x instruction booklets relating to the system and usage

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Scilogex OS40-Pro Overhead LCD Digital StirrerThe Scilogex OS40-Pro Overhead LCD Digital Stirrer fea (more)tures a maximum capacity of 40L, accurate microprocessor stirring speed control guarantees speed precision, anti-spill microprocessor control slow start up prevents sample spills, a through-shaft design allows for easy adjustment of the impeller position, LCD display and control, set value and actual value can be displayed for real-time monitoring of torque and speed. INCLUDED: The Scilogex OS40-Pro Overhead LCD Digital Stirrer includes: - Key of Drill Chuck - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty