Armfield BE2 Chromotography Unit Lab

Electronic board for Upgrade to LCMS-8060 SHIMADZU Card only Reference: 225-12189-44 TQ-DCDCPS ASSY  (more)225-16950 BOARD 225-16952B

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Biosystems/MDS SCIEX Pro ID Software V1.1 This was removed from a university lab where it w (more)as surplus to requirements. The item is in reasonable cosmetic condition. There are some minor marks on the disc. The case has some signs of wear. Also included are the following:1x Pro ID Software 1.1 Release Notes1x Validation Certificate, dated 05/01/2005

Amersham Biosciences AKTA FPLC System This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been serviced, but failed the service. It is sold for spares/repairs. Included are; 1x Amersham Biosciences AKTA FPLC System UPC-900 P-920C/N: 18-1118-67System/N: 01098245 1x UPC-900C/N: 18-1128-95S/N: 01099325 1x P-920C/N: 18-1164-68S/N: 01099849

Gas chromatograph Hewlett Packard 6890 Series. Detectors mounted FID and ECD. Injection system "spli (more)t/splitless". Suitable for the detection of cannabinoids, terpenes, pesticides, solvents, aromatic components, among others. Detection times are very stable. Software ChemStation or Clarity to comply with CFR21 Part 11 (+ € 1,500), required for IQ / OQ. PC. Includes user manuals. Agilent Technologies - 6890 opt. 211 Flame Ionization Detector (FID) Manual (click here)

CLIMATE CHAMBERS KKP SMART PRO POL-EKO KKP - STABILITY AND NO VIBRATION WITH PELTIER TECHNOLOGY The  (more)Peltier technology of the KKP series offers stable, silent and vibration-free climate conditions, maintaining exceptional temperature and humidity variations and fluctuations. They are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 70°C (max 20°C below room temperature; without humidity) and thanks to a steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKP Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Temperature range without humidity 0…+70°C (max 20°C below room temperature) - Temperature range with humidity +5…+70°C (max 20°C below ambient temperature) - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and - Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKP SMART PRO SERIES POL-EKO offers 2 models of climatic chamber with Peltier cell: KKP 240 of 245 liters and KKP 750 of 749 litres. Reliable. For peace of mind. The Peltier cell-based cooling system features excellent temperature variation and fluctuation. It improves the temperature recovery time (for example after opening the door) and the humidity inside the chamber is extremely stable. In the images below, the temperature/humidity diagram with the test points displayed according to the ICH Q1 A (R2) guidelines and the recording of temperature and humidity over time. STEAM HUMIDIFIER KKP climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Furthermore, thanks to their wide temperature and humidity range they can be used for testing electronic components, plastics or building materials. ENERGY SAVING Thanks to latest generation technology, the KKP series humidifier heats very quickly, using only the water necessary. LOW WATER CONSUMPTION Water consumption is only 90 ml per day for KKP 240 and 290 ml per day for KKP 750 (at 40°C, 75% RH). Water consumption is so low that the tank will only need to be refilled every two months. Furthermore, thanks to a heater in the waste water tank, no maintenance is required and the climatic chamber can be installed anywhere. PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the structure and accessories of the KKP models. 1 - touch control panel 2 - USB port 3 - open door sensor 4 - ø30mm access port for external sensor 5 - room fan 6 - door handle with key lock 7 - shelf 8 - internal glass door 9 - main power socket 10 - fan for electronic compartment 11 - LAN 12 - cooling system based on Peltier modules 13 - humidifier module 14 - drying module 15 - demineralised water tank Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Stainless steel wire shelf - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Maximum speed: 13000 rpm Capacity: 6 x 50 mL Tube dimensions (⌀xL): 29 x 104 mm Maximum sample densi (more)ty: 1.2 g/mL Suitable for the following centrifuge types: Sorvall RC-6 Plus series Sorvall Evolution RC series Sorvall RC-5 plus series

A&D Weighing Galaxy HR-250AZ Analytical Balance, 252 g, 0.1 mg Capacity 252 g Readability 0.1 m (more)g Repeatability 0 to 200 g: 0.1 mg 200 to 252 g: 0.2 mg Features - Compact Super Hybrid Sensor (C-SHS) enables space saving with fast 2 sec stabilization - One-touch Cal allows any user to perform internal calibration in seconds - HR-AZ Series products come equipped with internal calibration, ensuring precision and ease of use to meet diverse application and budgetary needs. - Rugged, shatterproof breeze break with anti-static plastic provide safety for challenging applications where product & user safety is a concern - Rotary-Radius doors take up no extra room in fume hoods/glove box and increase safety by avoiding operation mishaps - The breeze break detaches in an instant, even with heavy gloves, making it easy to clean and safe to top-load - Simple user navigation makes this ideal entry level balance from lab to industrial weighing environments - Front mounted illuminated spirit bubble makes for an easy leveling experience to ensure the best performance - Removable breeze break allows effortless cleaning of SS pan, spill ring, base floor - Breeze break top pivots left or right to allow easy access for tall flasks and beakers The A&D Weighing Galaxy HR-250AZ Analytical Balance, 252 g, 0.1 mg, combines compact design with exceptional precision, suitable for a variety of lab and industrial environments. This model features the innovative Compact Super Hybrid Sensor (C-SHS), which not only saves space but also ensures rapid results with a 2-second stabilization time. Internal calibration is streamlined through a one-touch feature, making it easy for any user to execute, enhancing operational efficiency and ensuring reliable readings. Safety and convenience are at the forefront of the HR-250AZ's design. It includes a rugged, shatterproof breeze break with an anti-static coating to prevent contamination in sensitive work environments, such as pharmaceutical and food industries. The balance's doors are designed to rotate within their radius, requiring no additional space, which makes it ideal for use in tight spaces like glove boxes and fume hoods. Additionally, its breeze break can be quickly detached, even with gloves on, simplifying the cleaning process and ensuring the balance is safe for top-loading operations. The HR-250AZ supports a wide range of measurement units and offers features like statistical calculation, percentage analysis, and piece counting, catering to diverse analytical needs. A front-mounted illuminated spirit level ensures proper setup for optimal accuracy, and the large, backlit display enhances visibility under any lab conditions. All models in this series come equipped with features designed to enhance usability and accuracy, including rotary doors that save space and facilitate easy access. This analytical balance is designed for long-term reliability and simplicity, backed by a 5-year warranty, ensuring trustworthy performance for years to come. INCLUDED: The A&D Weighing Galaxy HR-250AZ Analytical Balance, 252 g, 0.1 mg includes: - Large Breeze Break w/ Antistatic Coating - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - AC Adapter Plug - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1060eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1060eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1060eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

Hermle 44 x 1.5/2.0ml rotor The Hermle 44 x 1.5/2.0ml rotor is a versatile and high-capacity centrif (more)uge rotor designed for use with the Hermle Z32-HK, Z327, and Z366 series centrifuges. It has a maximum capacity of 44 x 1.5/2.0ml tubes in a dual-row configuration, allowing for efficient processing of large numbers of samples. The rotor is available in two angle configurations, 32° and 55°, enabling researchers to optimize their centrifugation protocols for specific applications. With a maximum speed of 15,000 RPM (16,000 RPM in the Z327-K model only) and a maximum RCF of 21,379 x g (24,325 x g in the Z327-K model only), the Hermle 44 x 1.5/2.0ml rotor is capable of high-speed separations, making it ideal for a range of applications, such as molecular biology, biochemistry, and clinical research. INCLUDED: The Hermle 44 x 1.5/2.0ml rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty