Luminex PCB Board 21904-01 (2015)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it w (more)as surplus to requirements. The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility. There is some chipped paint along the top of the unit and scuffs and scratches from general use.

GE AKTA Purifier 10, FPLC System This was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in good working order. This system includes: GE AKTA Purifier consisting of components: P-900, UV-900, pH/C-900, Box-900, IV-908, PV-908, INV-907 and M-925Model number: 28406262 Serial Number: 1533920 GE A900 AKTA Autosampler A900Model number: 56-3122-32 Serial Number: 110012 Amersham Pharmacia Biotech FRAC-950Model number: 18-6083-00 Serial Number: 56608320 M7 001223 AKTA FPLC consisting of components: INV-907, AD-900 and X2 PV-908 GE CU-950 Control unitModel number: 28931475AG Serial Number: 7183 Hiload 26/60 Superdex 75 pg HP Compaq 8000 Elite CMT Business PCModel number: AU245AV Serial Number: CZC1040XZG HP Compaq LA1951G monitor Phemomenex DEGASSEX DG-4400 degasserModel number: DG-4400 Serial Number: 043B0487 Various cables and leads All relevant user guides and user manuals UNICORN 5.0/5.1 Software and all relevant manuals

GE Healthcare AKTA Avant 150 Chromatography System This was removed from a working lab where it was  (more)surplus to requirements. The unit has been recertified by a service engineer. They were unable to run a full service due to the absence of a control PC, but they gave it clean bill of health and preventative maintenance procedures were carried out. A full report is available on request. GE Healthcare AKTA™️ Avant 150 Chromatography SystemModel: AKTA Avant 150Code#: 28969436Serial#: 2066473Year: 2016/02

MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul Volume Range 0.1 to 2.5ul Adjustable or Fixed Volume A (more)djustable Pipette Type Manual Air Displacement Features - Ergonomic design minimizes user fatigue and risk of repetitive strain injuries - Lightweight and low-force operation enhances comfort during extended use - Large display window for clear volume identification - Integral tip ejector facilitates access into narrow tubes, improving usability - Compatible with universal pipette tips, increasing versatility - Easy to calibrate and maintain, ensuring long-term reliability - The lower part of the pipette is autoclavable for easy sterilization - Manufactured from innovative materials for durability and performance - Quality tested according to ISO8655-2:2002 standards for assurance of accuracy - Ideal for use in various laboratory applications requiring precise volume measurements The MARSHALL Select MS-P2.5UL Pipette is a precision instrument designed for meticulous laboratory work, offering adjustable volume settings from 0.1 to 2.5ul with fine increments of 0.05ul. This manual air displacement pipette features an innovative thumb plunger mechanism for smooth volume adjustment, ensuring precise control during experiments. Engineered with ergonomics in mind, this pipette boasts a lightweight, low-force design that significantly reduces the risk of repetitive strain injuries, making it ideal for prolonged use in demanding laboratory environments. The large display window prominently shows the volume setting for easy identification immediately, enhancing usability and accuracy. Additional features include an integral tip ejector that facilitates access into narrow tubes, increasing its versatility across various applications. The pipette is compatible with universal pipette tips, broadening its applicability. For maintenance, the lower part of the pipette is autoclavable, allowing for straightforward sterilization without compromising the integrity of the device. Manufactured from innovative materials and quality tested according to ISO8655-2:2002 standards, the MARSHALL Select MS-P2.5UL Pipette is not only durable but also ensures consistent performance and reliability, making it an essential tool for any laboratory focused on precision and ergonomics. INCLUDED: The MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Profibus – a real-time industrial network standard. It is based on the physical layer of the s (more)erial interface known as RS485. Communication takes place on a master/ slave basis and in this correlation the scale acts as a slave device. The use of the Profibus interface allows RADWAG scales to integrate with older generation automation systems using the Profibus network, which is still widely used in industry. Profibus is featured in the IM01.EX-4 communication module as well as in MW-01-A4 and MW-04-3 weighing modules, and as an option at an extra charge in PUE HX7 and PUE HY10 terminals.

Ohaus VXMTDGB Multi-Tube Vortex Mixer Speed Range 1200 - 2400 rpm Capacity 4.5 kg Orbit 3.6 mm Feat (more)ures - High Capacity: Easily process up to 50 samples at one time with the Multi-Tube Vortex Mixer, customizable with six different tube racks and a post-extension kit. - Versatile Housing Options: Choose between an easy-to-clean, one-piece stainless steel housing ideal for clean rooms, or a more economical painted steel version. - Programmable Pulse Mode: Enhance vortex action for challenging samples with the digital model's programmable pulse mode, allowing you to adjust the pulse-on/pulse-off time interval. - Applications: Ideal for suspensions, genotyping, and high-throughput DNA and RNA testing in clinical labs. - Independent LED Displays: Digital models feature independent LED displays for speed and time, enabling the operator to view both settings simultaneously. - Robust Construction: Includes a stainless steel foam rack for 50 tubes (12 mm diameter) and interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter. *Similar Model Depicted The Ohaus VXMTDGB Multi-Tube Vortexers are ideal for high throughput sample processing. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. The VXMTDGB is microprocessor-controlled and run in continuous or timed mode. Digital models feature touchpad control for easy input of settings, and independent LED displays for speed/time. Timer displays elapsed time and when programmed, shuts off unit when time reaches zero.Digital models feature a programmable pulse mode which allows the user to adjust the pulse-on/pulse-off times between 1- 59 sec intervals, enhancing the vortex action by creating a more vigorous mix. The variable speed microprocessor control provides consistent uniform mixing action. Basic speed of 500 to 2500 rpm and time settings are adjusted with knobs using 1 to 10 dial settings. INCLUDED: The Ohaus VXMTDGB Multi-Tube Vortex Mixer includes: - 12mm Test Tube Foam Rack - Tray Pad Set (Top & Lower Pad) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA KS 130 Control Shaker Type of Movement Orbital Speed Range 0 to 800 RPM Shaking Stroke 4 mm Fea (more)tures - Electronic adjustment of speed and timer - A digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuousoperation (endless) - With integrated end point positioning (for automatedrobot-controlled sampling) - All functions can be controlled and documented withlabworldsoft® - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included in delivery, please orderseparately The KS 130 control open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 2.0 kg, it can handle a variety of vessel sizes and shapes. The shaker's integrated end point positioning function is highly useful for automated robot-controlled sampling.INCLUDED: The IKA KS 130 Control Shaker includes: - KS 130 control - Attachment screws (4x) - Single-head wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 130 Control Shaker Specifications Type of movementorbitalShaking stroke4 mmPermissible shaking weight (incl. attachment)2.0 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)80 rpmSpeed range0 - 800 rpmSpeed displayLCDTimeryesTimer displayLCDTime setting range1 - 599 minOperating mode timer and continuous operationShaking table lock yesDimensions (W x H x D)270 x 98 x 316 mmWeight8.8 kgPermissible ambient temperature5 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesAnalog outputyesVoltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 WComparison of ModelsSpecificationsIKA KS 130 Basic ShakerIKA KS 130 Control NOL ShakerIKA KS 130 Control ShakerIKA KS 260 Basic ShakerIKA KS 260 Control NOL ShakerIKA KS 260 Control ShakerIKA KS 501 Digital ShakerShaking Stroke4 mm4 mm4 mm10 mm10 mm10 mm30 mmPermissible Shaking Weight (incl. attachment)2.0 kg2.0 kg2.0 kg7.5 kg7.5 kg7.5 kg15 kgMotor Rating Input45 W45 W45 W45 W45 W45 W70 WSpeed Range80 - 800 rpm80 - 800 rpm80 - 800 rpm50 - 500 rpm10 - 500 rpm10 - 500 rpm0 - 300 rpmTimerYesYesYesYesYesYesYesTime Setting Range5 - 50 min1 - 599 min1 - 599 min5 - 50 min1 - 599 min1 - 599 min1 - 55 minDimensions (W x H x D)270 x 98 x 316 mm270 x 98 x 316 mm270 x 98 x 316 mm360 x 98 x 420 mm360 x 98 x 420 mm360 x 98 x 420 mm505 x 120 x 585 mmRS 232 InterfaceNoYesYesNoYesYesYesAnalog OutputNoYesYesYesYesYesYesVoltage220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V230 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Adam Equipment LAB 214E Luna Analytical Balance, 210g, 0.0001g Capacity 210g Readability 0.0001g Re (more)peatability 0.0002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display allows use in many different countries - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Analytical Balances are designed with an array of features and functions to accommodate most lab applications. The Luna range offers improved performance for faster, more accurate readings. With stylish, modern backlighting, Luna’s impressive display gives an aura of smart sophistication. The LCD features large, readily discernible 24mm digits in white on a black background. Multilingual text and display capability make Luna well-suited for users in various regions. For simple operation, navigation buttons are color-coded, helping users perform functions with minimal training. Luna provides USB and RS-232 interfaces to facilitate data collection and transmission to computers or printers. ABS plastic construction and rugged grade 304 stainless steel pan mean Luna is easy to clean and can withstand demanding lab use. Available in four models with capacities up to 250g, Luna offers a readability of 0.0001g and can perform basic and detailed measuring tasks. INCLUDED: The Adam Equipment LAB 214E Luna Analytical Balance, 210g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty