HPLC Waters 600

Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager – Spares/Repairs This system was removed from a un (more)iversity lab where it was surplus to requirements. All included units are in good cosmetic condition and power on. However, due to the following issue, the system is being sold as Spares/Repair: The FLM-3100 displays a valve error. Both valve bodies are missing, and the left-hand valve does not operate. This system comprises the following: Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager 2 x - IonPac CG5A 4 X 50mm Dionex FLM-3100 Flow Manager (top) Dionex FLM-3100 Flow Manager (bottom)

This Antec Scientific Alexys 100 LC-EC System was removed from a university lab where it was surplus (more) to requirements. All the modules power up but have not been tested further at our facility. It is in good cosmetic condition with only minor marks from use. The lab informed us that it was working fine before it was put away about 5 years ago. There are a number of consumables included with it. The system includes; 1x LC 100Part No. 182.0035 1x AC 100Part No. 183.0035 1x LC 110Part No. 193.0035 1x AS 100Part No. 181.0037 1x Decade IIPart No. 171.0035 1x OPRPart No. 184.0035

This item has just arrived in our stock. Please enquire for further details.

This was removed from a university lab where it was surplus to requirements. The lab informed us tha (more)t it was in use until December 2022 and was fully serviced by Waters up to Feb 2023. All modules are in excellent cosmetic condition with only minor marks from use. Included are; 1 x Waters Sampler ManagerPart Number: 186016007S/N: J10NPS 788M The unit powers up but we were unable to test it further at our facility. This unit does include 2x part number 418000179 vile trays.  1 x Waters Binary Solvent ManagerPart Number: 186016002S/N: H10NPB 923NThe unit powers up, the flow light flashes red, green, and then turns off. We were unable to test it further at our facility. 1 x Waters Auxiliary Solvent ManagerPart Number: 186016021S/N: H10NPA 505NThe unit powers up but the flow light does the same as the binary manager. We were unable to test it further at our facility. There is also a network switch on the top of the stack. It is untested. It comes with 5x sealed bagged "nano inlet filter 5 micron", part number: 289002172 with dates on the bags ranging from 2011 to 2020. A set of bagged tubes that are labelled as "solvent aux".

Agilent 1100 Series HPLC System consisting of: 1100 Series Degasser G1379A S / N: JP40716471. Binary (more) Pump 1100 Series G1312A FW: A.07.01 S / N: DE43616890. Automated injector Series 1000 G1313A FW: A.07.02 S / N: DE23920959. Thermostated column compartment G1316A 1100 Series FW: A.07.02 S / N: DE43643595. 1100 Series UV Detector G1314A with 10mm cell and G1369A LAN card FW: A.07.02 S / N: JP24020131. Windows 7 PC with Chemstation B.04.03-SP1 Agilent 1100 Series HPLCs are considered the most popular HPLCs in the world. They are robust, durable and versatile systems. Our instruments are restored according to the manufacturer's specifications to provide the best performance. They have a one year warranty. The 1100 HPLC series supports efficient pump action as well as advanced data analysis and diagnostic software. The system is easy to use and has a low cost. Looking for a more personalized product? All of our Agilent HPLC systems can be configured to your specific requirements.

Bunsen Vortex Shaker - AGT9 tube mixer. Speed range from 50 to 2600 rpm. Head stock for mixing test  (more)tubes of up to Ø 20 mm. Specifications: • It has two switchable working modes: - Continuous mode for uninterrupted mixing. - Manual mode in which mixing is activated automatically by slightpressure from the tube on the head stock. • Metal housing painted in epoxy. • Electronically regulated speed control. Stirring speed Variable between 50 and 2600 r.p.m Power 48 W Dimensions (W x H x D) 140 x 100 x 155 mm Weight 4 kg Eccentricity 6 mm

Applied Biosystems ABI Prism 7900HT This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but has the following issues. The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues. It is sold for spares/repairs. The PC is included. Dell Optiplex PCDell 17" MonitorKeyboard & MouseUSB CableDVI Cable All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

*No weight* Mach Aire Air Cabinet Lab This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition. It is in good working order and previously housed a Beckman Coulter Biomek. The item has been dismantled for ease of transportation, comprising all framework, hex screws, and windows.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty