Waters Micromass Quattro Micro GC-MS System Software and 2 x Edwards Pumps Lab

GC-MS Thermo Scientific Trace GC Ultra / ITQ 1100 / TriPlus AS/HS Autosampler System This item was r (more)emoved from a university laboratory where it was surplus to requirements. All system components are in good cosmetic condition. The working condition for each unit is listed below. The Thermo Scientific Trace GC Ultra's service panel has been removed, and some components are missing. The earthing cable is disconnected. Due to the disconnected components and lack of full testing, this system is sold as Spares/Repair. Components and Condition: Thermo Scientific Trace GC Ultra - Model: K04300000000080 - Serial No.: 320070204 - Condition: Not powered on. The service panel has been removed, and some components are missing. The earthing cable is disconnected. Thermo Scientific ITQ 1100 (Polaris Q-Mass Spectrometer) - Model: Polaris Q-Mass Spectrometer - Serial No.: MS211856 - Condition: Powers on with a green power light, and fans are running. No further testing has been conducted. Thermo Scientific DPC (Direct Probe Controller) - Model: Direct Probe Controller - Serial No.: DPC 10513 - Condition: Powers on with a green power light. No further testing. Thermo Scientific TriPlus Autosampler - Model: TriPlus - Serial No.: 20088612 - Condition: Powers on with a green power light. No further testing. Thermo Scientific TP 101 - Model: TP 101 - Serial No.: 20170459 - Condition: Powers on with a green power light. No further testing. Thermo Scientific TP112 TriPlus HS Headspace Turret Injector - Serial No.: 20087277 Thermo Scientific TriPlus TP111 AS Liquid Handler Turret - Serial No.: 20172100 Included Accessories and Components: - Thermo Swap It GC/MS Interface CD - Thermo MSD Transferline Ferrule - Thermo Swap-Tight Ferrule (0.00/0.25/0.32) - Thermo Pro-Cap (0.25/0.32/0.53) - Thermo Direct Insertion Probe (Serial No.: 119300-ODIP) - Thermo TriPlus SPME Kit (Serial No.: 20084014) - Thermo ION Volume Insertion/Removal Tool - Thermo Ion Volume Holder - Alumaseal Ferrule 0.4mm (Pack of 10) - MGVF-005 (Pkt. 5) and MGVF-004 (Pkt. 4) - Thermal Fitting (Part No.: 34705451) - Seal Flat Silicone MM18X7X2 (Part No.: 29003037) - Vespel/Graphite Ferrule 1/16" x 0.5mm ID (Pack of 10) - Graphite Sealing Ring for 8mm Inlet (Pack of 2) - Filament Assembly ION Trap/DSQ II (x3) - Inlet Liner Seal for Trace 2000GCs (Pack of 2) - Graphite Vespel Ferrule for 0.1-0.25 (Pack of 10) - Graphite Vespel Ferrule for 16-003 (Pack of 10) - Graphite Vespel Ferrule for 16-16 (Pack of 10) - Graphite Vespel Ferrule for CE-005 (Pack of 1) - Various wires included

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varian 450-GC GC Gas Chromatograph This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and is in good cosmetic condition with minor marks. Filters:1x Moisture Filter CP17911x Oxygen Filter CP17970

TTP LabTech Mosquito LCP Automated Liquid Handling This item was removed from a university lab where (more) it was surplus to requirement. It is in excellent cosmetic condition and powers on, we are unable to conduct further testing at our facility. The previous client has stated it was working order prior to removal. Specifications: - Model: Mosquito LCP - Serial No.: LCP-601

The RV 10 digital represents the continual enhancement of the IKA RV 10 rotary evaporator line. The  (more)unit comes with an universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1600 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Type of cooling: vertical Cooling surface: 1600 cm² Speed range: 5 – 280 rpm Reversible direction of rotation: yes Lift: Motor Stroke: 140 mm Heating temperature range: room temp – 180°C Set temperature resolution: ±1 K Filling volume max: 4 l Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 32.36 kg

Perkin Elmer TurboMass Gold AutoSystem XL GC-MS System & Accessories Lab This was removed from a (more) university lab where it was surplus to requirements. The system powers up and is in good cosmetic condition, although it has been seen by an engineer who has reported this item is not in working condition, therefore, it is listed as Spares/Repair. The transfer line has been removed. Included are; Perkin Elmer AutoSystem XLModel: AutoSystemXLSerial#: GION2031503 Perkin Elmer TurboMass GoldModel: TurboMass GoldSerial#: 647N2032301 Also included is the following: TurboMassGC Mass SpectrometerSoftware Guide TurboMatrixHeadspace SamplersInstrument Manual TURBOMASS GOLD GC/MSHardware Guide TURBOMASS GOLD GC/MSTutorial TurboMassGC Mass SpectrometerHardware Guide TurboMassGC Mass SpectrometerUser's Tutorial AutoSystem XL GCUser's ManualVolume 2 ATD 400Automated Thermal DesorberUser's Manual TurboMassGC MASS SPECTROMETERUser's Tutorial AutoSystem XL GCUser's Manual Volume 1 Clarus" GC/MSManualsV5.4 TurboMatrixHeadspace SamplersInstrument Manual

MAS.1 Y device is an electromagnetic weighing module of high resolution, equipped with Y touch panel (more) featuring 5.7" display. The device can be integrated into a weighing system of the customer. Solid construction and advanced electronics ensure great adaptability both when fitting the module into the technological line and building it into the customer device. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2×USB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Ohaus R71MHD35 Ranger 7000 Compact Bench ScaleFor Ranger 7000, there is one resounding theme: it off (more)ers the best of every ingenious feature that make OHAUS industrial products the right tools for your toughest weighing jobs. Ranger 7000 boasts the highest resolution, largest display, most application modes and connectivity options, as well as the largest memory library of any industrial compact bench scale in the OHAUS portfolio.Features include: - Simplify complex applications and minimize the need for manual calculations with 10 advanced application modes, peripheral device control and an optional kit for a second scale platform. - The most precise scale in its class with one-second stabilization time, up to 75,000d or 350,000d display resolution and legal-for-trade certifications. - Extremely durable scale designed to thrive in rugged industrial environments. Features IP54 rated metal housing and sealed metal terminal. - With SmarText 2.0 software and a 4.3 inch graphic display, the advanced functionality of Ranger 7000 is simple to use with minimal training. Click Here to View Product Video INCLUDED: The Ohaus R71MHD35 Ranger 7000 Compact Bench Scale includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty