Thermo Dionex ASRS 300 2 mm Self-Regenerating Suppressor

SAFETY FIRE CASE TYPE 30 - CHEMISAFE - Completely made of electrogalvanized steel sheet with a thick (more)ness of 1 - 1.5 mm, cold bent - Gray RAL7031 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Automatic closing of the lid when the ambient temperature exceeds 50°C 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the container according to the EN14470-1 standard - Non-standard trolley - Side handles - Lid with lock and key - 1 retention tank in painted steel - ISO 3864 : signs with pictograms - Certified as fire resistant for 30 minutes, according to EN14470-1 BV (Bureau Veritas Supplied: - 1 stainless steel retention tank (capacity 1.5 litres) Optional: - Wall mounting - Internal carbon dioxide fire extinguisher with automatic thermal activation (62 °C) - Cart - Pipe passage (chromatography) APPLICATION: CPG/HPLC CHROMATOGRAPHY Storage of solvents in a portable fire-resistant container and linked to the chromatographic chain via small tubes. The tubes are connected through a fire resistant passage with a diameter of 2 cm located on the lid of the container. In the photo the convenience of the CHEMISAFE transport box. Versatile and very useful. Sturdy structure and metal door straps ensure you a long life. With the optional trolley, very easy to transport anywhere. WHAT IS CHROMATOGRAPHY? Chromatography is a process for separating the components of a mixture. To start the process, the mixture is dissolved in a substance called the mobile phase, which carries it through a second substance called the stationary phase. To know more: Cromatografhy On our webshop there are only some of the models that can be ordered. If you are interested in all the possibilities available, contact us. DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. Go to the CONTACT form ➞

Thermo Dionex ASRS 300 2 mm Self-Regenerating Suppressor Dionex reference: 064555 Year of manufactur (more)e: 2012 Never used

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F381 - Capacità di stoccaggio (sacche di plasma da 350ml): 284 - Limite degli allarmi di temperatura freddo/caldo: -37°C / -27°C - Conforme a DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Elettronica multifunzione con display a 0,1°C - Struttura anticorrosione garantita a vita Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Boekel Scientific 134900 Statnip Desiccator, LargeThe Boekel Scientific 134900 StatnipDesiccator is  (more)designed to prevent static buildup and ideal for storing ESDsensitive devices such as CMOS, MOSFETs, and hybrid circuits under an inertclean and dry atmosphere- as well as any static samples. The Boekel Scientific134900 Statnip Desiccator eliminates the need to purchase ionizers or applytopical antistats. The sturdy stainless steel construction is less leaky thanconventional plastic desiccators which tend to warp and discolor with age, andfeatures glass slides and front door panel. Stainless steel shelves glide onconductive runners and are grounded to stainless steel shelf supports, frameand grounding lug, adjustable is 3/4” increments. The inside glass surface has a vapor depositedfilm of tin oxide. These units are compact and can be stacked to furtherconserve bench space. INCLUDED: The Boekel Scientific 134900 Statnip Desiccator, Large includes: - Two Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range without humidity: 0 (at least 20 below ambient temperature) to 70°C Temperature ra (more)nge with humidity: 5 (at least 20 below ambient temperature) to 70°C Temperature accuracy: 0.1°C Humidity range: 10 – 90% RH Humidity accuracy: 0.5 % RH Humidity supply: Distilled water from external tank by self-priming pump Humidification: humidification by hot steam generator Dehumidification: dehumidification by cold trap using the Peltier technology Interior dimensions (WxHxD): 1040 x 1200 x 600 mm Volume: 749 l Dimensions (WxHxD): 1224 x 1720 x 856 mm Weight: 208 kg