Wescor slide stainer-cytocentrifuge

Embossed foil keypad for simple operation Short-spin function with pre-selected rotational speed rpm (more) or rcf settings as required (from 500 rpm in steps of 100 rpm) Timer up to 99 min or continuous run Soft key for gentle acceleration and deceleration Automatic imbalance detection Equipped with a Eppendorf F-45-30-11 fixed angle rotor. Rotor has a 30x 3,75 g capacity and a max rpm of 14000. Max. rotational speed: 14,000 rpm Max. load: 30 x 2.0 ml Safe-Lock Microcentrifuge Tubes Max. density of material to be centrifuged: 1.2 g/ml Max. kinetic energy: 6,100 Nm Dimensions (HxWxD): 228 x 310 x 430 mm Weight: 17 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This unit was removed from a lab as surplus to requirements. At our site, we tested it and it ran up (more) to 14,000 rpm smoothly. We have not tested the unit any further.

This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with marks from use. It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C. MSE Rotor 43124-141Max RPM - 6000 4 x Buckets4 x Yellow Adaptors hold 1 x 50ml tube each

Beckman Centrifuge Rotor SW-28 28,000rpm This was removed from a university lab where it was surplu (more)s to requirements. It is in good cosmetic condition with minor marks. Beckman SW-28 28,000 rpm Serial No. 05U 10874Six Beckman swing buckets SW 28 38.5ml

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

This listing is for a Class F1 5g Weight. The unit is in full working condition and is ready for im (more)midate realese. Box-Wooden box (included) Calibration Certificate-No Class-F1 Density (ρ)-8000 (± 30) kg/m3 Design-One-piece (monobloc) Material-High-grade steel, vacuum melted

Scilogex MS-H380-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plateMS-H380-Pro 5 (more).5 x 5.5 in. LCD Digital Magnetic Hotplate Stirrer Features: - Heat only, stir only or heat and stir together functions - Easy to read backlit LCD display, with independent heat and stir display - Ceramic plate for chemical resistance and easy clean - Electronic speed control for constant speed even during changes in load - Hot warning sign if temperature is above 50C - cTUVus approved for UL and CSA - 2 Year Warranty Click Here to View Product Video INCLUDED: The Scilogex MS-H380-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -84C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed forlyophilizing light to moderate sample loads. The compact design is ideal forlabs with limited floor space. The upright stainless steel collector coil holds4.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigerationsystems cool the collector to -84C (-119F), suitable for low eutectic pointsamples including acetonitrile. Lyo-Works™ OS provides a real time display ofcollector temperature, vacuum level and optional End-Zone™ end point detectionsystem, shown on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 4Lof ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710402000 FreeZone 4.5L -84C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Coated Glassware Set G1B Diagonal condenser for all standard distillations; theoption with  (more)the most affordable price - With transparent plastic coating - suitable for atemperature range up to max. 80 ° C - Glassware set includes one 1,000-ml evaporating flaskand one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with astandard NS 29/32 joint size are also available with NS 24/29 groundjoints - Ventilation cap without ground joints for easy handling andgrease-free operation included - A venting valve with refill function is optionally available - Not suitable for the automated distillation program DynamicAUTOaccurate on Hei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhletextraction and descending condenser system INCLUDED: The Heidolph Coated Glassware Set G1B includes: - G1B Diagonal Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty