Heidolph Coated Glassware Set G1B

Yamato CA-301-115V Cold Trap 4L, 115V Refrigerant R404A Max Low Temperature -45°C Internal Capacity (more) Approx. 4 L Features - Excellent choice to extract acid and organic solvents with the optional glass condenser - Efficiently reduces vapor inhalation amount to the vacuum pump - Can be used as a low temperature tank as well as pre-cooling tank - Utilizes R404A and mixed coolants - Space saving and highly mobile on wheels 4L cold trap that efficiently traps water vapor and toxic substances discharged from vacuum oven and rotary evaporator to protect vacuum pump. Excellent choice to extract acid and organic solvents with the optional glass condenser. Efficiently reduces vapor inhalation amount to the vacuum pump. Can be used as a low temperature tank as well as pre-cooling tank. Utilizes R600a and mixed coolants. Space saving and highly mobile on wheels. Max. low temp -45°C. Dehumidifying capacity max 0.9 kg.INCLUDED: The Yamato CA-301-115V Cold Trap 4L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 The Eppendorf 6 x 15ml (more) Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 are for use with 90mL rectangular buckets in the Eppendorf A-4-38 Rotor. These adapters feature a capacity for 6 x 15ml round bottom tubes, each with maximum tube dimensions (Diameter x Height) of 17.5mm x 100mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366Bottom ShapeRound BottomRotor CompatibilityA-4-38 Swing Bucket Rotors

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers .Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/4” (6.5 mm) Intensity High Ampl. Range 59.5 - 247 Volume 10 - 50 ml

LM2539 Gel Electrophorese system M.0154

Dimensions (HxWxD): 310/105 x 1630 x 805 mm Worktop (WxD): 1630 x 785 mm Sink (HxWxD): 200 x 400 x 5 (more)50 mm

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 20 mm, length: 110 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Standard magnification range: x8 – x50 Maximum capable magnification: x4 – x200 Zoom ratio: 6.3:1 St (more)andard working distance: 115 mm Maximum working distance: 220 mm Optical principle: Greenough Equipped with a InscOpe camera (software not included)

Dimensions (H x W x D): 133 x 236 x 110 mm