Jouan B4i Bench-Top Lab Centrifuge 14000rpm + Tube Rotor Lab

Beckman L8-80 Ultracentrifuge Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal. Due to the above faults, this item is listed as Spares/Repair. The 3-phase plug has been removed and there is no rotor included in the sale. Also included: 1 x Operation Key1 x Original User Manual

This Beckman J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus  (more)to requirements. We have replaced the lid and repaired an area of cracked plastic underneath it. It is very stable. There are some cracks around the gas strut area. They do not appear to affect the operation of the unit. The unit is functional and has a comprehensive service history. The centrifuge holds a vacuum well and has been tested at: 5,000rpm10,000rpm15,000rpm20,000rpm (Max). It ran fine at all these speeds but the needle isn't totally in sync with the control knob. It has been tested at the following temperatures: 0ºC our thermometer read -15.8ºC20ºC our thermometer read 21.2ºC It appears to probably have a cooling issue. The compressor etc runs fine. It just appears to drop lower than it is set. When set to higher temps, it takes quite a while to heat up.

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Max. Speed: 80000 rpm Control Speed Accuracy: ±2 rpm Max. RCF: 546,883 x g Temperature Range: 0°C to (more) 40°C Capacity: 6 x 250 mL Acceleration/Braking Profiles: 10/11 (10 and coasting) Program Storage: 1000 programs with step-runs Dimensions (HxWxD): 880 x 790 x 690 mm Weight: 390 kg Equipped with: 1x Thermo AH-650 swing-out rotor (max 50000 rpm) 6x Thermo 52426 bucket (5 mL capacity)

Mitsubishi Freqrol - A500 Inverter LabModel: FR-A520-3. 7K This item was removed from a university w (more)here it was surplus to requirement. It is in reasonably good cosmetic condition. We are unable to test this item as it requires a connection to a larger system.

Wheaton Modular Roller Apparatus Cat No 348970CE This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in full working order. The speed adjustment knob is missing, but still works. Item has 2 tiers & 12 rollers. Roller Area x 2: 52cm x 67cm.

Large VacGen Vacuum Tank & Beam Tube with VAT Gate Valves. This was removed from a university wh (more)ere it was surplus to requirements. The lab confirmed that all the equipment is in excellent functional condition and has been housed in a clean room lab for the full lifetime. Tank Dimensions: L 136cm x W 126cm x H 260cm.Tank is fitted with 6 openings.3 x 65cm x 65cm.2 x 10cm x 10cm.1 x 15cm x 15cm. Beam Tube Dimensions: L 450cm x W 81cm x H 81cm.Opening 65cm x 65cm. 2 x Gate Dimensions: L 100cm x W 24cm x H 183cm.Opening 65cm x 65cm.Fitted with SMC Solenoid valves Model: VF3143. Three studs have been snapped off in one of the Gate valves.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 15 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves.

RCT basic ready-to-go Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Sett (more)ing accuracy speed 10 rpm Features - Stand for precise sensor positioning - LED displays for clear temperature and speed monitoring - Adjustable settings for tailored control - Robust construction with aluminum alloy setup plate - Integrated safety circuit for temperature control - Compatible with external temperature sensors - Versatile connectivity options with RS 232 and USB interfaces Precise temperature control with the RCT basic ready-to-go Solution. This comprehensive package includes essential components such as a stand for secure positioning, multifunctional silicone cover, and PT 1000 temperature sensor. Achieve accuracy and efficiency effortlessly with LED displays and adjustable settings.INCLUDED: The RCT basic ready-to-go Solution includes: - H 16 V Support rod - BC 1000 Beaker cap - Screw driver - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - H 44 Boss head clamp - Manufacturer's Documentation - 2 Year Manufacturer's Warranty