VWR Thermo Micro Star 1.7 Pico 17 Micro Centrifuge Mikro Zentrifuge 24 x 1,5 2ml

Max speed: 18000 rpm Max RCF: 23542 x g Max volume: 4x 145 ml Speed range: 200 – 18000 rpm Temperatu (more)re range: -20°C to 40°C Running time: 59 min 50 sec (10 s increments), 99 h 59 min (1 min increments) Dimensions (WxHxD): 400 x 360 x 700 mm Weight: 60 kg Equipped with: 1x Hermle 221.18 fixed angle rotor (max 12000 rpm) 6x Adapter 50 ml falcon tube 6x Adapter 15 ml falcon tube

Speed (100 rpm increments): 100 – 4400 rpm Maximum RCF: 3000 x g Maximum capacity: 4 x 100 mL Accele (more)ration time: ≤ 19 s Deceleration time: ≤ 19 s Timer: 0 – 99 min, or continuous Dimensions (WxDxH): 320 x 400 x 240 mm Weight: 19 kg Equipped with: 1x Eppendorf A-4-38 swing-out rotor 4x Eppendorf 100 mL round bucket 4x Eppendorf insert for 4 round bottom tubes

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requir (more)ements. The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly. It is in good cosmetic condition with marks from use. It is sold for spares/repairs.

FisherBrand GT 1R Centrifuge w/ TX-150 Swinging Bucket Rotor Lab This item was removed from a univer (more)sity where it was surplus to requirement. It is in good cosmetic condition and working order, it has been tested to its MAX (4350RPM) This item also includes the following: Thermo Scientific TX-150 Swinging Bucket RotorMax speed: 5000RPMweight class: GSerial#: 75005701

MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM Maximum Speed 12,000 RPM Maximum RCF 1 (more)4,170 × g Maximum Capacity Hematocrit Rotor: 24 x capillaries Features - Reaches up to 12,000 RPM for efficient hematocrit determinations - Streamlined and practical with an all-steel structure for durability and safety - Space-saving design suitable for various laboratory settings - Features an integral food-grade silicone ring to prevent aerosol overflow - Includes detection functions for door lock and motor status - Push-button programming with digital display for easy parameter settings The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, a high-performance centrifuge engineered to meet the demanding requirements of immunohematology and research laboratories. Operating at a maximum speed of 12,000 RPM, this centrifuge specializes in the accurate determination of hematocrit (HCT) values by centrifuging anticoagulant-treated whole blood in disposable capillary glass tubes. After a brief 5-minute spin, the proportion of red cells is measured against the total volume of blood, allowing precise analysis of the blood's hematocrit level. The machine's ergonomic, streamlined design not only ensures practicality and safety with its all-steel structure but also enhances the aesthetic appeal of any laboratory setting. The MS-CE12000 is not just robust but also intelligently designed for ease of use and safety. It features a compact, space-saving footprint and is equipped with an integral food-grade silicone sealing ring to prevent aerosol overflow, safeguarding the operator. The centrifuge boasts electromechanical integration for its door lock, ensuring reliability and safety during operation. Additionally, its user-friendly interface includes push-button programming and a digital tube display for setting and monitoring centrifugal speed and time. With real-time detection systems for door lock and motor status, complemented by an alarm function for enhanced diagnostic safety, this centrifuge is an essential tool for modern laboratories focused on hematology and cytology. INCLUDED: The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 15,200 R (more)PM Maximum Capacity 44 x 1.5/2.0ml or 12 x 5ml Warranty 2 Year Manufacturer's Features - Easy-to-turn rotary knob for parameter adjustments - Waterproof keypad provides protection that helps significantly increase the lifespan of the product - One-touch toggling between speed, g-force, and temperature controls - Refrigeration capabilities from 40°C to -20°C - Cools down from 23°C to 4°C in less than 10 minutes - Pre-cool feature quickly lowers temperature of the rotor and chamber before a run - LCD display which projects information in real-time - View and adjust user parameters from the main screen; no need to navigate through sub-screens - Powerful induction motor reaches speeds up to 15,200 RPM in less than 16 seconds - Maximum g-force of 21,953 RCF - 10 acceleration/deceleration settings - 99 memory sets for commonly used speed and time settings - Motorized lid-locking system prevents centrifuge from opening during operation - Rotor imbalance sensing system stops the motor should the rotors become imbalanced, protecting the user from spinning rotors Click Here to View Product Video The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge provides high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With refrigeration capabilities, 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, the FC5515R provides stable liquid separation for life science applications requiring high-speed operation. The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force, as well as control the temperature. A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly used parameters are a few of the FC5515R’s features that propel high-performance. Among the FC5515R’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from by the high-speed spinning rotors. Compatible with seven different rotors, more than any centrifuge in its class, the highly versatile FC5515R can be used for various applications of different volumes. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5515R Frontier Micro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Ohaus EX223N Explorer Precision Balance Maximum Capacity 220 g Readability 0.001 g Repeatability (Ty (more)pical) 0.001 g Features - High-performance precision balance with a capacity of 220g and default readability of 0.001 g - Large 5.7" full-color VGA touchscreen display for intuitive navigation and control - AutoCal™ automatic internal calibration ensures consistent accuracy over time - Fast stabilization times and enhanced vibration filtering for precise measurements - Metal base with ABS top housing and stainless steel pan for durability - Glass draftshield with top-mounted side doors and flip/sliding top door for versatile access - Four programmable touchless sensors for hands-free operation - RS232 and USB communication ports included, with optional second RS232 or Ethernet connectivity The OHAUS Explorer Balance Series offers a blend of advanced features and modern design, providing unmatched functionality for laboratory and industrial applications. With capacities ranging up to 35kg and readabilities from 0.1mg to 0.1g, these balances cater to a wide range of precision weighing needs. Key features include the AutoCal™ automatic internal calibration system, ensuring daily accuracy without the need for external weights, and a large color touchscreen that simplifies operation through an intuitive interface. Many explorer balances are designed for versatility, featuring up to 14 application modes and multiple connectivity options such as RS-232, USB, and optional Ethernet. The modular design allows for flexible workspace integration, and select models include a frameless draftshield with motorized side doors, operated via programmable touchless sensors for hands-free efficiency. AD models offer automatic door functions, enhancing convenience, while N models are NTEP certified, ensuring compliance with strict readability and repeatability standards. D models feature dynamic capacity ranges, making them adaptable for various weighing tasks. Durable construction with a metal base, stainless steel pan, and integrated weigh-below hook ensures long-lasting performance. The Explorer series also supports advanced user management, data logging, and security features, making it ideal for regulated environments. Whether for basic weighing, parts counting, or more complex measurements, the OHAUS Explorer Balance Series delivers precision, reliability, and ease of use, setting a new standard in high-performance balances. INCLUDED: The Ohaus EX223N Explorer Precision Balance includes: - Power Cord - Two Year Manufacturer's Warranty

Ohaus FC5714 Frontier Multi-Pro Centrifuge w/ Selectable Rotor Speed Range 200 to 14,000 RPM Maximum (more) Capacity 4 x 100ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5714 Frontier Multi-Pro Centrifuge w/ Selectable Rotor includes: - FC5714 Frontier Multi-Pro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty