Sigma 4K15 Benchtop Centrifuge w/ Sigma Swing-Out 11150 Rotor Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Jouan B4i Benchtop Centrifuge with S40 Rotor This item was removed from a university where it was su (more)rplus to requirements. The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit. It is in fair cosmetic condition, showing signs of general use. Includes: - S40 Swinging bucket rotor with 4 buckets - 4 additional buckets - 12 x bucket inserts Specifications: - Model: B4i - Serial No.: 30202056 - Maximum RPM: 14,000 (unit); 4,300 (rotor)

Sigma 4K15 Benchtop Centrifuge w/ Sigma Swing-Out 11150 Rotor Lab This item was removed from a unive (more)rsity where it was surplus to requirements. The centrifuge powers on and is in good cosmetic condition. During testing, the unit displayed an "Imbalance fast stop" error when attempting to run a cycle, indicating an imbalance issue. Therefore, further testing could not be conducted and it is listed as Spares/Repair. Included: - Sigma swinging bucket rotor (Nr.11150) with all 4 buckets. Specifications: - Model: 4K15 - Serial No.: 76812

Eppendorf 5415 R Refrigerated Benchtop Centrifuge Lab This item was removed from a university lab wh (more)ere it was surplus to requirement. It is in good cosmetic condition and in good working order. Also included; - Eppendorf F-45-24-11 Fixed-Angle Rotor - Capacity: 24 x 1.5/2.0mL

MSE Mistral 3000i Benchtop Centrifuge This was removed from a university lab where it was surplus to (more) requirements. Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature. Additionally included: 1 x MSE RotorModel BS4402 7 x Swinging Buckets:Volume: 250ml Bucket Adaptors: 6 x BlueHolds: 12x 5ml Vials 7 x GreyHolds: 4 x 12ml Vials 8 x MSE BrownHolds: 1 x 100ml VIals 1 x Hex Key Locking Bar

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab wher (more)e it was surplus to requirements. The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm. It was tested with a digital thermometer (not included).When the temperature was set to 4˚c, the thermometer read 5˚cWhen the temperature was set to -4˚c (minimum) the thermometer read -5˚c There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors. It is in reasonably good cosmetic condition but has some minor marks from use.

This listing is for a Class F1 100g Weight. The unit is in full working condition and is ready for  (more)immediate release. Material: High-grade Stainless Steel (NC-001-0.2K-F1-SS) Density: 7,950 ± 140 kg/m3 (as per OIML standards) Tolerance Limit: Not specified, but Class F1 weights are intended for use in the verification or calibration of class F2 weights and for use with weighing instruments of special accuracy class I and high accuracy class II. Packaging: Individual weight packaged in a wooden storage box

Maximum temperature: 300 ºC. Speed range: 1100 rpm Dimensions (DxHxW): 270 x 95 x 160 mm Hot plate a (more)rea: Ø 130 mm

Siskiyou MXMS-100 Microscope Translator This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and good mechanical order.

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scilogex MicroPette Plus Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linea (more)r Stand The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linear Stand includes: - Two Year Manufacturer's Warranty