Thermo Scientific Pico 17 Microcentrifuge

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

Eppendorf Refrigerated Centrifuge 5804 R Lab This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition but does not power on, therefore we are unable to test it further, and it is listed as Spares/Repair. The control board is faulty, and is loose inside the chamber. There is no rotor.

MARSHALL Select MS-CE6000 Benchtop Centrifuge, 6,000 RPM Maximum Speed 6,000 RPM Maximum RCF 4,387  (more)x g Maximum Capacity 4 x 500ml Features - All-metal construction with multi-layer explosion-proof design for safety and durability - Maintenance-free DC brushless motor ensures stable, low-noise operation - 5-inch LCD touch screen with multilingual support, including customizable options - Electromechanical integration door lock and food-grade silicone sealing for safety - Advanced safety features: self-test, blocking, overspeed, and overtemperature alarms - User-friendly interface with intuitive operation and real-time parameter display - Multiple user-defined program settings with memory for the last used program - Supports a variety of rotors and adapters for 0.2 ml to 750 ml tubes - Compact dimensions make this centrifuge suitable for benchtop use The MARSHALL Select MS-CE6000 Benchtop Centrifuge offers a robust and reliable solution for laboratory centrifugation needs. With a maximum speed of 6,000 RPM and a maximum RCF of 4,387 x g, it can accommodate up to 4 x 500 ml samples, making it versatile for various applications. Its all-metal construction with a multi-layer explosion-proof design ensures operator safety and durability. Driven by a maintenance-free DC brushless motor, the centrifuge provides stable, low-noise operation at less than 65 dB(A). The user-friendly interface features a 5-inch LCD touch screen with support for multiple languages. It offers electromechanical integrated door locking for enhanced safety and a food-grade silicone sealing ring to prevent aerosol overflow. The centrifuge includes advanced safety features such as self-test, blocking, overspeed, and overtemperature alarms. Its design supports various angle rotors and adapters for 0.2 ml to 750 ml tubes, making it adaptable to diverse laboratory needs. Additionally, the system allows for user-defined programs and remembers the last used settings for convenience, with timer settings from 1 second to 99 minutes and 59 seconds. Overall, the MARSHALL Select MS-CE6000 is a versatile and secure choice for laboratories seeking efficient and reliable centrifugation. INCLUDED: The MARSHALL Select MS-CE6000 Benchtop Centrifuge, 6,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge The Sprint™ 6H Portable kit allows for  (more)mobile processing of clinical applications. The package includes a 6 position swing out rotor for blood tubes, 12V voltage adapter, and adjustable leveling stands to match various car seat angles and ensure balanced centrifugation.Designed for use with 10ml tubes (16 x 100mm), smaller tubes (12 x 75mm and 12 x 100mm) can be centrifuged using the optional adapters (item: C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for removal of samples.INCLUDED: The Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge includes: - 12V Car adapter - 6 Position swing out rotor - Adjustable leveling stands - Two Year Manufacturer's Warranty

Benchmark MyFuge Mini Centrifuge The MyFuge Mini Centrifuge is a personal centrifuge that virtually  (more)fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. Click Here to View Product Video INCLUDED: The Benchmark MyFuge Mini Centrifuge includes: - 8-Position Microtube Rotor - PCR Strip Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Stainless steel storage vessel equipped with a gooseneck supply, vacuum hose for connection to an ex (more)ternal vacuum pump (not included) and drain valve on the bottom. Capacity about 60 L

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39135 Fisher Scientific Power 608 ITEM-39137 Apelex ps 608 ITEM-39138 Apelex PS 608 ITEM-39139 Bio-Rad 2110 Fraction Collector ITEM-37095 Phenomenex DEGASSEX DG-4000 ITEM-37097 Hewlett Packard series 1100 waste bottle tray ITEM-37098 Agilent Technologies Waste Bottle Tray ITEM-39142 Apelex PS 304II ITEM-39143 Apelex PS 304II ITEM-25295 Mettler Toledo AG104 Digital Analytical Balance Laboratory Scales Lab ITEM-25809 Bibby Scientific Stuart Orbital Rotator SB3 Lab ITEM-11323 Thermo Scientific Barnstead RO Model 7155 Water Purification System Purifier Lab ITEM-39144 Techne Dri-Block DB-2A ITEM-41034 man150m fan x 2 ITEM-39145 Techne Dri-Block DB-2A ITEM-37102 Unicam Flow-Through Cell-(Boxed) ITEM-24751 Boekel UV Crosslinker Lab - No Bulbs. ITEM-40915 APC Back-UPS CS 500 ITEM-40916 Plastic Support Plate ITEM-40917 Bio-Rad Model 200/2.0 Power Supply ITEM-40918 Bio-Rad Power Pac 1000 ITEM-40919 Axon Instruments CyberAmp 380 ITEM-39149 Stovall The Belly DancerITEM-39150 Zeiss Microscope ITEM-39153 Swift M4000-D Microscope ITEM-39154 Bio-Rad Model 2110 Fraction CollectorITEM-39156 Techne Mini Centrifuge ITEM-39157 Life technologies tfx-20M ITEM-39158 Hancocks light box ITEM-39159 Jencons scientific light box ITEM-39160 IKA-Vibrax-VXA ShakerITEM-39059 Bio Rad 500ITEM-39060 AND Balance ITEM-39058 Consort E432ITEM-37105 Samsung Shoot and Share Memory Camcorder- boxedITEM-37106 JVC GR-D820 Camcorder ITEM-37107 JVC Everio Hard Disk Camcorder G SeriesITEM-37108 Perkin Elmer LC 240 Fluorescence Detector ITEM-39914 Horiba LY-201ITEM-41033 Olympus SZ40 Stereo Zoom Microscope

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab This system was removed from a university whe (more)re it was surplus to requirement. It is in very good cosmetic condition and powers on. The previous owner has notified us that this system is in full working order. This system includes the following: - Pharmacia LKB VacuGene Pump - ProXPRESS 2D User's Guide - ProXpress Test Sheets - 2950-2017 Gell Cassette Assy - 2950-2019 UV Gel Adaptor (Sealed) - 2950-2048 Calibration Sample Assy - PX2950-2006 - 2950-2049 Standard Wet Gel Cassette Assy - Phoretix Software - Proteome 1D Analyser Software and manual

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark IPD9600-35ZO Zirconium Oxide jar 35ml, set of 2 The Benchmark IPD9600-35ZO Zirconium Oxide (more) jar 35ml, set of 2 are ideal for grinding biological samples, plants, bones, teeth, soils, and sludges. These jars are offered in a 35ml volume with 15mm zirconium oxide grinding balls. Zirconium oxide is a chemically inert ceramic material. Not as hard as and less expensive than tungsten carbide, it is used for softer samples where trace metals from stainless steel may be a concern. These jars are designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. INCLUDED: The Benchmark IPD9600-35ZO Zirconium Oxide jar 35ml, set of 2 includes: - Set of IPD9600-35ZO Zirconium Oxide Jars - Manufacturer's Documentation - 1 Year Manufacturer's Warranty