Thermo Multifuge Megafuge 40R Refrigerated Centrifuge Zentrifuge 4x750ml X3R ST

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

Centrifuge for the determination of fat according to Gerber, Röse-Gottlieb, Babcock and for the dete (more)rmination of the solubility of milk powder (ADPI). Characteristics: Stainless steel case Programmable speed from 600 rpm to 1130 rpm in steps of 10 rpm (corresponds to a g-force of 77 to 372 g, depending on the rotor) Programmable heating up to 68°C in 1° steps Centrifugation time programmable from 1-99 minutes Automatic safety lid locking Automatic unbalance shutdown Automatic brake Technical specifications: Empty weight: 26 kg Total height with lid: 460 mm Ø outside: 670 mm Filling height: 370 mm Speed ​​range: 600 to 1130 rpm Temperature range: room temperature to 68°C Equipped with protective drum rotor for 8 Mojonnier tubes.

Max speed: 16400 rpm Temperature range: -9°C to 40°C Max centrifugal force: 25000 rcf Max kinetic en (more)ergy: 6100 Nm Max density of samples: 1.2 g/ml Dimensions (HxWxD): 250 x 310 x 597 mm Weight: 34.8 kg Equipped with: 1x Eppendorf FA-45-30-11 Aerosol-tight lid 1x Eppendorf FA-45-30-11 fixed angle rotor (max 14000 rpm; 30x 1.5 mL/2.0 mL micro tube capacity)

This Thermo Scientific Heraeus Fresco 21 Refrigerated Benchtop Centrifuge was removed from a univers (more)ity lab where it was surplus to requirements. The unit was inspected by a service engineer. They replaced the display with one from an older model. It is now green. It is fully working up to 14800rpm and has been fully temperature tested. It is in excellent cosmetic condition with only minor usage marks.

Hermle Z366 K Refrigerated Centrifuge For applications requiring increased capacity over the Z306 or (more) Z326 series centrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 K Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Illumina High-Speed Microplate Shaker This item was removed from a university laboratory where it wa (more)s surplus to requirements. It powers on and is in good cosmetic condition. RPM:- Tested at 600 RPM (lowest) - Tested at 1000 RPM - Tested at 2500 RPM (maximum)

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA INC 125 FS SP20 Digital Incubator Shaker Temperature Range Ambient +8°C to 80°C Speed Range 10  (more)to 300 RPM Chamber Volume 125L Features - Shaking stroke: 20 mm for optimum oxygen input - The shaker platform can be pulled out halfway (with line indicator) for comfortable and tilt-proof loading - The threaded grid on the platform allows the mounting of fixing clips or STICKMAX adhesive mat for different vessels and sizes - When the door is opened, the shaking function stops automatically - Shaking and temperature control function can be used independently of each other - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode for disinfection and reduction of cross-contamination (100/120°C) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber and triple-glazed door with window - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) - Very large LCD display for easy reading - Large viewing window and switchable interior lighting for observation of samples - Counter, timer, and timer auto (temperature-controlled) function to ensure reproducible test conditions The IKA INC 125 FS SP20 Digital Incubator Shaker is the first incubator shaker with a patented removable shaker platform. Without the platform, the unit can be used like a normal incubator. The large inner chamber with a volume of 125 liters offers space for up to 6 grid shelves (without shaker platform). Thanks to high temperature stability and a uniform shaking motion that improves oxygenation, the incubator shaker is the perfect solution for cell cultivation and other microbiological applications. Click Here to View Product Video INCLUDED: The IKA INC 125 FS SP20 Digital Incubator Shaker includes: - Shaker Platform SP20 - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty