IKA INC 125 FS SP20 Digital Incubator Shaker

Heraeus Heracell 150 Co2 Incubator Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition externally but the copper interior has tarnished.

New Brunswick Innova 4300 Incubator Shaker This item was removed from a university laboratory where  (more)it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. It functions well, although it is slow to reach the set RPM. Includes: - Flask Mounts with Fittings - Test Tube Holding Racks

Heidolph Incubator 1000 Heating Module The Incubator 1000 Heating Module has been meticulously desig (more)ned to provide optimal heat distribution, ensuring top-tier results in your laboratory applications. Powered by a 300-watt output, this heating module guarantees swift heat-up times within your incubation system, drastically reducing waiting periods and increasing efficiency. Thanks to its wide temperature range, this module can comfortably accommodate thermophilic organisms by reaching an impressive maximum temperature of 65°C. Built with the importance of consistent and rapid heat dissemination in mind, the Incubator 1000 Heating Module is an indispensable tool for any laboratory focused on maintaining high performance and reliable results.INCLUDED: The Heidolph Incubator 1000 Heating Module includes: - Power Cord - Three Year Manufacturer's Warranty

Memmert IF30 Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 32 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides - Max. loading capacity of chamber is 132 lbs, with each shelf supporting up to 44 lbs The Memmert IF30 Forced Circulation Incubator 32L, 115V is designed to deliver precise temperature control and uniform heating for a wide range of laboratory applications. With a setting temperature range from +20°C to +80°C and a working temperature range starting at 10°C above ambient, this incubator ensures reliable thermal processing. The 32L (1.1 cu.ft.) chamber, crafted from durable stainless steel with deep-drawn ribbing, is reinforced for easy cleaning and long-lasting durability. Equipped with the advanced ControlCOCKPIT, a multifunctional digital PID-microprocessor controller featuring a high-definition TFT-color display, users can easily adjust key parameters like temperature, fan speed, air flap position, and program time. To enhance operational efficiency, the IF30 incubator features forced air circulation by a quiet air turbine, adjustable in 10% increments, with an option for pre-heated fresh air admixture. Safety is prioritized through an adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880. Additionally, the incubator’s maximum chamber load is 132 lbs, with each shelf capable of supporting up to 44 lbs, making it a robust and dependable choice for precise temperature-controlled applications. INCLUDED: TheMemmert IF30 Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.)cu.ft.) Features - 384 L (13.6 cu. ft.) volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert HPP410eco Climate Chamber 384L, 115V offers precise climate control for a wide range of laboratory applications. With a 384-liter capacity and a temperature range from +5°C to +70°C (with humidity) or 0°C to +70°C (without humidity), this chamber provides versatile conditions for storage and incubation. Equipped with dual Pt100 sensors for accurate temperature control to 0.1°C, it ensures reliable performance and consistent environmental conditions. The adjustable humidity range from 10% to 90% RH, controlled by a hot steam generator and dehumidified by Peltier technology, allows for flexible climate simulation, making it ideal for sensitive samples. The TwinDISPLAY control system, powered by a PID microprocessor, ensures easy and precise adjustments, while the AtmoCONTROL software enables programmability via USB or Ethernet. Safety is a top priority, with the integrated AutoSAFETY system offering visual and acoustic alarms for over- and undertemperature protection. The durable stainless steel door with a 2-point locking system and an inner glass door provides secure access while maintaining energy efficiency. With a maximum chamber load of 440 lbs and support for up to 14 shelves, the HPP410eco delivers exceptional capacity and reliability for demanding laboratory environments. INCLUDED: The Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heating block for 1.5/2.0 ml tubes at fixed temperatures of 60°C and 95°C.

Benchmark MC-12 High Speed Microcentrifuge Benchmark’s MC-12 is the first and only compact microcent (more)rifuge capable of achieving centrifugal speeds up to the critical threshold of 16,000 x g, often held as the standard for many molecular biology/DNA protocols. Its brushless, maintenance free drive system makes it powerful, yet compact enough to allow each work station to be fully equipped with a personal centrifuge. The MC-12 defines a new class of microcentrifuge: compact, quick, powerful and affordable. All aspects of microcentrifuge performance were taken into consideration and no compromises were made. In addition to its unsurpassed speed, the MC-12 also delivers shortened acceleration/deceleration times, whisper quiet operation, and its computer-designed airflow pattern minimizes sample temperature increases during longer runs at high speeds. All operating parameters are set using a single, conveniently located control knob and the large, bright LCD provides a clear indication of time and rpm or g-force. A separate momentary spin button permits instant spin downs, without setting or disturbing any preset parameters. The aircraft grade aluminum rotor accepts 1.5 to 2.0ml tubes directly, as well as 0.5ml and 0.2ml tubes with optional adapters. For applications requiring sub-ambient temperatures, the MC-12 is cold room safe. INCLUDED: The Benchmark MC-12 High Speed Microcentrifuge includes: - 12 Place Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade Especially when using narrow-neck (more)ed vessels, e.g. round-bottom flasks, a stirring tool with pivoting blades is used. Just like our pivoting-blade impeller BR 12. This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: ideal vessel diameter: 120 mm, ideal ground clearance: 6 mm, ideal filling level: 120 mm, and ideal volume: 1,400 ml. The pivoting-blade impeller BR 12 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Scilogex SuperPette Autoclavable Pipettor, 0.5-10μlThe new SCILOGEX SuperPette fully autoclavable di (more)gital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 0.5-10μl includes: - Two Year Manufacturer's Warranty

Dimensions (WxDxH): 140 x 140 x 745 mm Compartment dimensions (WxDxH): 135 x 135 x 55 (x13) mm

Thermo Scientific Electron Finnpipette 100-1000µL Laboratory Pipette 100-1000µL Variable Volume Pipe (more)tte Tip Type: For use with Finntip Flex 1000, 1000 µL tips Volume: 100-1000 µL Increment: 5.0 µL Uncalibrated Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 500 µL: 0.499