Funke Gerber Super Vario N Centrifuge

This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with marks from use. It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C. MSE Rotor 43124-141Max RPM - 6000 4 x Buckets4 x Yellow Adaptors hold 1 x 50ml tube each

This unit was removed from a lab as surplus to requirements. At our site, we tested it and it ran up (more) to 14,000 rpm smoothly. We have not tested the unit any further.

This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full w (more)orking condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

Ohaus FC5917RF Frontier Multi-Pro Refrigerated Floor Centrifuge w/ Selectable Rotor Speed Range 200  (more)to 16,010 RPM Maximum Capacity 4 x 1000ml Temperature Range -20°C to 40°C (-4°F to 104°F) Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Ohaus Frontier Multi-Pro centrifuges offer a high-speed centrifugation platform which can be tailored to fit your needs. The intuitive design of the centrifuges and accessories enables easy access to parameter settings and quick rotation between applications. The performance of these centrifuges is propelled by German engineering and high quality components for reliable use. Frontier 5000 Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with our range of rotors and accessories for customized use. Available in 11 models with capacities from 0.2 ml to 4 × 1000 ml - and feature high-speed performance at maximum volume, automatic rotor identification and safety features. The intuitive design of the centrifuges & accessories enable easy access to parameter settings, and quick rotation between applications. Features include automatic rotor recognition and backlit LCD. The performance of these centrifuges is propelled by German engineering, and high quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Click Here to View Product Video INCLUDED: The Ohaus FC5917RF Frontier Multi-Pro Refrigerated Floor Centrifuge w/ Selectable Rotor includes: - Selected Rotor - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accepts a variety of rotors and adaptors. Advantage-Lab Universal Centrifuge is durable and versatil (more)e and features a large control panel for easy viewing. No rotor equipped Description Rotor type recognition: manual input for adjustment before start up. Imbalance sensor with safety shutdown mechanism. Electronic lid locking system prevents opening of lid while in use. Error mention with imbalance or other failure. Manufactured in accordance to IEC 1010 regulations. Corrosion-resistant steel chambers. Highly durable construction provides stability during imbalance. Specifications Capacity 4 x 100 mL Display Digital Type Universal Centrifuge Frequency 50/60 Hz Max. Speed 6,000 rpm Material Stainless Steel Dimensions (L x W x H) Exterior 350 × 470 × 330 mm

Mini laboratory centrifuge MSE Micro Centaur SANYO Reference: MSB010.CX1.5 Voltage: 230 V, 50 to 60  (more)Hz Current: 2 A Power: 165 W Speed: 13000 rpm Capacity: 12 test tubes of 1.5 to 2 ml Timer: 30 minutes

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives This was removed from a university lab  (more)where it was surplus to requirements. The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear. Due to the power supply not being included, we are unable to test further. Includes the following untested objectives; Gallenkamp 160/0.17 100 1.25 oil Zeiss Achroplan 10x/0,25 ∞/- Zeiss Epiplan 50x/0,50 44 28 50 Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5 Zeiss Achrostigmat 5x/0,12 44 01 20

S+B Plinth cabinet DT Ice blue 900

F1 Mass Standard - knob weights, wooden box. Nominal value - 250 kg.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

A rack for under-pan weighing intended for XA balances. The rack is designed for weighing loads requ (more)iring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.