Hermle SIEVA-3-TC Filtration Centrifuge w/ External Temperature Control & 500ml Perforated Centrifugal Basket

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor. The rotor is not included.

Hermle Z207-M Centrifuge Due to the compact design, the Microlitre Centrifuge Z207-M, is applicable  (more)even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf 5804 Centrifuge w/ Selectable Rotor The Eppendorf 5804 Benchtop Centrifuge is a compact, l (more)ow-profile centrifuge that features a powerful, maintenance-free motor and accommodates a variety of rotors for unparalleled application versatility. The 5804 acts as three centrifuges in one: a high capacity general purpose centrifuge for cell harvesting; a high-speed centrifuge for separating cell lysates; and a micro centrifuge for DNA precipitations. The centrifuge enables interchangeable swing-bucket and high speed fixed-angle rotors with automatic rotor recognition, which senses rotor type to set maximum allowable speed. The Eppendorf 5804 can accomodate spin volumes from 0.2mL to 4 x 100mL at low-to-high speeds for a wide range of applications and capacities of up to 16 x 15mL conical or 30 microcentrifuge tubes per run. We may have different adapters available depending on the rotor chosen with this centrifuge. If the selected rotor includes adapters that will not work for your application, please inquire.INCLUDED: The Eppendorf 5804 Centrifuge w/ Selectable Rotor includes: - Selected Rotor - Operator's Guide - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5804 Centrifuge w/ Selectable Rotor SpecificationsMax g-force20,800 rcfSpeed range200-14,000 rpmTimer1 to 99 min, with cont. modeDimensions (W x D x H)18 x 20 x 13 inWeight121 lb

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.

Mini laboratory centrifuge 846070 for GREINER Bio-One microplates New equipment in its original pack (more)aging Speed: 2,550 rpm (16,022.1 rad.min-1) Capacity: 2 Microplates

Centrifuge for the determination of fat according to Gerber, Röse-Gottlieb, Babcock and for the dete (more)rmination of the solubility of milk powder (ADPI). Characteristics: Stainless steel case Programmable speed from 600 rpm to 1130 rpm in steps of 10 rpm (corresponds to a g-force of 77 to 372 g, depending on the rotor) Programmable heating up to 68°C in 1° steps Centrifugation time programmable from 1-99 minutes Automatic safety lid locking Automatic unbalance shutdown Automatic brake Technical specifications: Empty weight: 26 kg Total height with lid: 460 mm Ø outside: 670 mm Filling height: 370 mm Speed ​​range: 600 to 1130 rpm Temperature range: room temperature to 68°C Equipped with protective drum rotor for 8 Mojonnier tubes.

Acuson Sequoia 512 Ultrasound Machine This item was removed from a university lab where it was surpl (more)us to requirements. The unit is in fair cosmetic condition, with the monitor casing loose and unstable, making it a visual PAT fail. The machine was not powered on due to this issue, and it is listed as Spares/Repair Includes: - Manuals Specifications: - Model: Sequoia 512 - Serial No.: 60720

Hermle 4 x 85ml rotor TThe Hermle 4 x 85ml rotor is a centrifuge rotor compatible with Hermle Z32-HK (more), Z36-HK, and Z446 series centrifuges. This rotor has a maximum speed of 15,000 RPM, which can be increased to 20,000 RPM with the Z36-HK centrifuge model only. It can generate a maximum relative centrifugal force (RCF) of 23,140 x g, or 41,137 x g with the Z36-HK centrifuge model. The rotor has a maximum capacity of 4 x 85ml and a maximum radius of 9.2 cm. The rotor is designed with a 30° angle that ensures the samples are centrifuged evenly. With its high speed and capacity, this rotor is suitable for a wide range of applications in research, clinical, and industrial settings. INCLUDED: The Hermle 4 x 85ml rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark H5100-2CR 24 x 1.5/2.0ml Cryovial Block for MultiTherm Touch The Benchmark H5100-2CR 24 x  (more)1.5/2.0ml Cryovial Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-2CR is not compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-2CR 24 x 1.5/2.0ml Cryovial Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MARSHALL Select MS-OS800 Orbital Shaker, 100-800 RPM Speed Range 100 to 800 RPM Platform Size (W x  (more)D) 9.8 x 9.6 in. (25 x 24.5 cm) Maximum Load 5.5 lb. (2.5 kg) Features - Orbital shaking motion with a 4 mm orbit size for effective sample agitation - Compact footprint suitable for labs with limited space - Independent LCD display for precise control and monitoring of speed and time settings - Timer function adjustable from 1 minute to 19 hours and 59 minutes with continuous operation available - Maintenance-free brushless DC motor ensures reliable and long-term performance - Overspeed detection and protection to maintain safe operation - Wide range of optional platforms to accommodate flasks and other popular vessels - RS232 interface facilitates remote PC control and data transmission for automated lab environments - IP21 protection class provides basic protection against solid objects and dripping water - Designed for smooth and uniform shaking across all speed settings The MARSHALL Select MS-OS800 Orbital Shaker is an advanced laboratory tool designed for precise and consistent sample mixing. With a speed range of 100 to 800 RPM, it facilitates effective orbital shaking with a 4 mm orbit size, ideal for a variety of shaking applications. The shaker can handle a maximum load of 5.5 lb. (2.5 kg) and features a compact platform measuring 9.8 x 9.6 inches, making it perfect for labs with limited space. This model is equipped with a maintenance-free brushless DC motor, ensuring durable, long-term operation without the need for ongoing upkeep. It features an independent LCD display that allows for easy monitoring and adjustment of speed and time settings, with a timer function that can be set from 1 minute up to 19 hours and 59 minutes, alongside a continuous operation mode for extended experiments. Safety is a priority with built-in overspeed detection and protection mechanisms that ensure the shaker operates within safe parameters. The MS-OS800 also offers flexibility through a wide range of optional platforms that can accommodate flasks and other popular vessels, enhancing its utility in diverse laboratory settings. Additionally, it includes an RS232 interface, supporting remote PC control and data transmission for seamless integration into automated workflows. The shaker's IP21 protection class guards against solid objects and dripping water, further ensuring the reliability and safety of laboratory operations. INCLUDED: The MARSHALL Select MS-OS800 Orbital Shaker, 100-800 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW