Grant Bio CVP-2 All-in-one PCR-plate centrifuge /vortex

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

Sorvall Discovery 100SE This was removed from a university lab where it was surplus to requirements (more). The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside. It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage. It is sold for spares/repairs.

Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Micro (more)processor control - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf 5702R Refrigerated Centrifuge with A-4-38 Rotor The Eppendorf 5702R centrifuge has a maxim (more)um speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. INCLUDED: The Eppendorf 5702R Refrigerated Centrifuge w/ A-4-38 Rotor includes: - A-4-38 Swing Bucket Rotor w/ Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Operator's Guide - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40CComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

CS 60UB PVC - CHEMISAFE UNDERCOUNTER CABINE - Completely made with a thickness of 18 mm in HD PVC -  (more)Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Stemi 305 is a compact stereo microscope with 5:1 zoom for biological education, labs and industrial (more) production environments.

New Brunswick U6785 Ultra Low-Temperature Freezer Lab This item was removed from a university where  (more)it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition and is missing one of its feet. Features: 1 x Shelf: 39 x 28 cm

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Adam Equipment LPB 223I Luna Precision Balance, 220g, 0.001g Capacity 220g Readability 0.001g Repea (more)tability 0.002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LPB 223I Luna Precision Balance, 220g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty