Hettich Rotofix 32A Centrifuge

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

Beckman GS-6KR Centrifuge This item was removed from a university where it was surplus to requiremen (more)t. It is in good cosmetic condition and working order.During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM. Includes:- - Beckman PTS-2000 Swinging Bucket Rotor Centrifuge - 4 x Buckets, the cover for one of the baskets is not included.

This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and runs up to 12500rpm. It is in reasonable cosmetic condition with marks from use.

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

Refurbished Universal 32 R Refrigeration Centrifuge. 6 months warranty. Scope of delivery: - Hettich (more) 32 R refrigerated centrifuge - Swing-out rotor Hettich type 1624 - 4  round bucket - Various adapters on stock (additional costs apply)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Revco Habitat CO2 Water Jacketed Incubator&nbsp;Model no. RCO3500TWBB was removed from a univer (more)sity lab where it was surplus to requirements. The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it. The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed. It is in excellent cosmetic condition with some minor marks from use. 4 Shelves - 49.5 x 49.5cm Internal dimensions - D52 W50 H55cm

This listing is for a Biorad Trans-Blot Turbo Transfer System.The unit is in full working condition  (more)and is ready for immediate release.Revolutionize your protein transfer process with the Trans-Blot Turbo Transfer System! This high-performance western blotting transfer system is meticulously designed to provide rapid transfers with exceptional efficiency. Achieve reliable protein transfer to membranes in as little as 3 minutes without sacrificing performance compared to traditional tank protein blotting.Key Features:Ultra-Fast Transfer: Complete your blot transfer in just 3 minutes, perfect for mini or midi gels.High Throughput: Transfer 1–4 mini gels or 1–2 midi gels in a single run, maximizing your lab's productivity.Greater Transfer Efficiency: Experience superior blot transfers with higher efficiency than other protein blotting methods.Customizable Design: The flexible design lets you tailor transfer conditions to meet your specific needs and is compatible with traditional semi-dry consumables.Optimized Transfer Packs: The Trans-Blot Turbo Transfer Packs come with an optimized buffer, membrane, and filter paper combination for unparalleled performance.Environmentally Friendly: Enjoy peace of mind with environmentally safe consumables that eliminate disposal costs.Specifications:Transfer Time: As fast as 3 minutesSystem Type: Rapid protein transfer apparatusTransfer Capacity: Transfer 1–4 mini or 1–2 midi gels per runMembrane Compatibility: Suitable for nitrocellulose and PVDF membranesConsumables: Available in ready-to-use, pre-packaged stacks or bulk quantities requiring assembly.

Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor Speed Range 200 to 13,500 RPM (more) Max. Capacity 8 x 5ml Temperature -20°C to +40°C Features - The next generation touch control panel is user-friendly even with gloves - High-speed centrifugation reaches up to 13,500 RPM and 16,800 xg - Real-time RPM and RCF conversion ensures accuracy - Program storage allows saving up to 99 programs - Unique status indicator light shows the running, standby, or completed status - Compact design with a powerful motor drive reaches speeds up to 13,500 RPM - Refrigeration cools down to 4°C in less than 10 minutes - Quiet operation even at full speed Benchmark’s flagship MC-24R refrigerated microcentrifuge features a next-generation touch control panel, high-speed centrifugation (up to 13,500 rpm / 16,800 xg), and compatibility with the unique COMBI-Rotor™ (sold separately), which accepts both standard microtubes (1.5/2.0 ml) and PCR tubes/strips (0.2 ml), eliminating the need for a dedicated PCR strip/tube rotor. These features make it an ideal choice for any molecular biology laboratory. The MC-24R offers an optional hermetically sealed rotor and a four-place PCR strip rotor. It also includes adjustable acceleration/deceleration rates, real-time rpm and rcf conversion, program storage for up to 99 runs, and a status indicator light, which informs the user if the unit is running, in standby, or has completed a run. Compact and convenient, the MC-24R is perfectly suited to be the workhorse of any lab. INCLUDED: The Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty