BIO-RAD 16K High Speed Tabletop Microcentrifuge

Centrifuge FC5513-K, Frontier™ 5000 Ohaus, with rotor Designed to be comfortable and practical, Fron (more)tier Micro centrifuges feature an intuitive control interface that is easy to operate even when wearing gloves. Micro centrifuges save valuable bench space by integrating all of their functionality into a small footprint. Frontier Micro centrifuges offer high-speed operation for a range of essential laboratory applications, such as DNA/RNA preparation, ultrafiltration and more. Additionally, biocontainment rotors allow for research with hazardous samples. The equipment is completed by a silent brushless motor, high sample productivity, multi-safety control, customized programs. Included in the FC5513-K model you will get the angle rotor with maximum capacity of 24 x 1.5 / 2.0ml. Features: Maximum relative centrifugal force (x g) at 17,317 g; maximum speed 13,500 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 85 mm; 45° angle. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN - Simple and modern interface, to set parameters easily - The display shows both the set and real parameters - Clear and right display STRUCTURE AND FUNCTIONALITY - The panel is splash proof to protect the centrifuge from accidental sample spills - The maintenance-free induction motor produces G-force max. of 17317×g - Speed ​​up to 13500 rpm in less than 15 seconds (with microtubes) - 10 acceleration/deceleration settings - 99 memory sets for quick storage and easy recall of used parameters - Rotor imbalance detection systems shut down the unit when loads are out of balance TECHNICAL FEATURES Speed ​​range: 200 rpm - 13,500 rpm Maximum relative centrifugal force: 17,317 g Maximum flow rate (rotor): 24 x 1.5 / 2.0ml Program memories: 99 Rotor Packaging: Angled Rotor: 24 x 1.5 / 2.0ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Pre-refrigeration time: not applicable Rotor Compatibility: Angled 24 x 1.5ml / 2.0ml; angled 24 x 1.5ml / 2.0ml sealable; Hematocrit rotor, 24 x capillaries; corner 18x2ml spin columns Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

This Beckman J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus  (more)to requirements. We have replaced the lid and repaired an area of cracked plastic underneath it. It is very stable. There are some cracks around the gas strut area. They do not appear to affect the operation of the unit. The unit is functional and has a comprehensive service history. The centrifuge holds a vacuum well and has been tested at: 5,000rpm10,000rpm15,000rpm20,000rpm (Max). It ran fine at all these speeds but the needle isn't totally in sync with the control knob. It has been tested at the following temperatures: 0ºC our thermometer read -15.8ºC20ºC our thermometer read 21.2ºC It appears to probably have a cooling issue. The compressor etc runs fine. It just appears to drop lower than it is set. When set to higher temps, it takes quite a while to heat up.

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

The Hygiena EnSure luminometer is a quality assurance system that can check and detect swabs for the (more) presence of ATP (Andenosine Tri Phosphate) within 15 seconds. The presence of ATP may indicate biological contamination. In locations such as hospitals, it is extremely important that proper cleaning is carried out. With the use of the EnSure, it can be scientifically proven within seconds that the cleaning has been done properly. Implementing a monitoring system to validate cleanliness has been shown to increase compliance with cleaning procedures from 40% to 82%. The main difference with the Hygiena SystemSure luminometer is that the Ensure is more sensitive and can detect up to 0.1 femtomole ATP. The EnSure uses the latest photodiode sensor technology, which has superior sensitivity and stability. In addition, the design is made in such a way that the luminometer is easy to operate with one hand. The luminometer works on two AA batteries for a long battery life, you can use an average of 8-12 months of continuous use before the batteries need to be replaced. Measures ATP, High Sensitivity ATP/Allergen Prevention, TVC, Enterobacteriaceae, Coliforms, E. coli, ALP, and ACP test devices Sensitive – can detect down to 0.1 femtomoles of ATP Advanced photodiode sensor technology – Internal solid-state detector is not affected by drops or shakes Storage: 100 programmable test plans 200 programmable user IDs 251 programmable locations per test plan 5000 programmable test locations Small, lightweight, handheld instrument (250 g, 70 x 180 x 30 mm) Quick-test mode enables ad-hoc testing Large screen with back-light and optional BOLD text Powered by 2 x AA batteries for several months of uninterrupted use Removable read chamber design allows for easy cleaning Durable outside shell and sealed keypad to protect against splashes and wear

Prior PL012 Binocular Microscope With 4 x Objectives Lab This item was removed from a university lab (more) where it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. Includes 4 x objectives:- EA 100 Oil 1.25 160/0.17 (clear image could not be obtained) - EA 4 0.10 160/- - EA 10 0.25 160/- - EA 40 0.65/0.17 Includes 2 x WF 10X/20 Eyepieces. Model: PL012S/N: 57400

This Varian VK 8000 Dissolution Sampling Station was removed from a university lab where it was surp (more)lus to requirements. This item is in good cosmetic condition and powered up, we are unable to test it further at our facility. The VK 7010 has the capacity to hold 8 vessels of 1 litre capacity and 8 stirring drive shafts but this unit is Missing its stirrers and vessels No paddles or spindles are fitted to the chucks on the drive shafts

OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 p (more)ositions, with a single electrical connection and independent operation of each place. Speed range from 200 to 1200 rpm. Temperature range from 30 to 400 ºC. Maximum capacity per square 2L. Plate dimensions of 100 * 100 mm for each square. OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 positions, with a single electrical connection and operation independently of each position. Adjustable speed and temperature, controlled by microprocessor. High precision with integrated internal Pt100 probe. LED display. Keyboard with membrane buttons, sensitive to the touch. The selected parameters are kept in the memory of the equipment even when it is turned off.