Beckman JA-20 20,000 RPM Centrifuge Rotor Lab

BECKMAN COULTER JLA-10.500 Aluminum Angle Rotor Max: 10,000 rpm, 18,600 x g Capacity: 6 x 500 mL Com (more)plete, with 6 buckets K-Factor: 2,850 Nominal Capacity: 3,000 mL For use with Avanti J-Series and J2-Series centrifuges (except J-21 Series)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5706-K model you will have the angular rotor with a maximum capacity of 12 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.427 g; maximum speed 6,000 rpm; tube diameter without adapter 18 mm / 15 ml; outer/inner radius 110 mm; angle 32°. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

Sorvall Heraeus 6444 rotor for Sorvall Legend RT / T Plus centrifuge, Thermo Scientific Sorvall RC4  (more)Series, Heraeus Cryofuge 5500i, and Heraeus Multifuge 4. Speed of 5.650 rpm. Capacity for 2 large microplates or 10 normal microplates. 33 cm diameter Specifications: Designation Rotor Plate high: 2 x 500 ml Maximum permitted load [ g ] 2 x 523 Maximum speed nmax [ rpm ] 5250 Maximum RCF to nmax 5083 Radio(max.) [ cm ] 16.5 Acceleration / deceleration [ s ] 110 / 55 Heating of samples n maximum relative temperature room of 23 ° c. Time operation 1 hour 13°C Spray-fit: IF

Beckman S4180 centrifuge rotor. Max speed: 5,500 rpm (4500 rpm in the nonrefrigerated centrifuges),  (more)Max RCF: 5,450 x g. Max. rotor capacity: 4 x 180 mL. Includes 4 buckets and 2 adapters (361228) for seven 15 mL tubes. Compatibility with Beckman Coulter Allegra 21 series, GS-15 series, and Spinchron 15 series centrifuges. User manual.

Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 The Thermo Scientific 75003181 Swing Bucket Ro (more)tor, TX-400, is a high-performance centrifuge rotor designed for use with several Thermo Scientific centrifuges, including the Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16, and SL 16. With a maximum capacity of 4 x 400ml, this rotor allows for efficient processing of high volumes of samples. The swing bucket design allows for easy loading and unloading of samples, and the rotor's compatibility with multiple centrifuges makes it a versatile solution for laboratories with a range of centrifuge models. With a maximum speed of 5,000 RPM and a maximum RCF of 4,696 x g, the Thermo Scientific 75003181 Swing Bucket Rotor, TX-400, is capable of medium-speed separations, making it ideal for a wide range of applications, including molecular biology, biochemistry, and clinical research. Please Note: Adapters are NOT INCLUDED with these buckets, please inquire. INCLUDED: The Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 includes: - 75003181 TX-400 Swing Bucket Rotor - Set of 4 x 75003655 Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 SpecificationsMaximum Speed5,000 RPMMaximum RCF4,696 x gMaximum Capacity4 x 400mlMaximum Radius16.8 cmCentrifuge CompatibilityThermo Scientific Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16 & SL 16 Centrifuges

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Genlab SP/LCI/320/SS/DIG Laboratory Incubator This was removed from a working lab where it was surp (more)lus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks, including a dent in the back panel. 6 Shelves - 51 x 50cm

Bespoke Purpose Built Laboratory Autoclave Room This is being sold on behalf of a client. It is surp (more)lus to requirements. The unit is in good working order, but will need to be dismantled on site by a potential buyer. The class 1 cabinet is included in the sale. The system is located in Alnwick, Northumberland. Any potential buyer will need to be able to dismantle the system for removal. It is going to need a lot of building work to be demolished, supported and reinstated for the removal. Also the water mains etc. The unit is mounted to the floor but has extensive pipework that goes approximately 4-5 feet below ground.  The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).