Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

All-in-one PCR plate centrifuge/vortex mixer that allows for the simultaneous sample preparation of  (more)multiple samples at one time. Versatile through being able to hold non, semi and fully skirted PCR plates with no additional accessories required. The CVP-2 offers three devices in one. • Centrifuge with vortex mixing • PCR plate centrifuge • PCR plate mixer Dimensions (hxdxw): 190 x 350 x 285 mm Centrifuge mixing speed control range: 300 to 1500 rpm Vortex mixing speed control range: 300 to 1200 rpm Speed control increment: 100 rpm G-force/RCF: 245 Centrifuge timer with sound alarm: 0 to 30 minutes Vortex timer with sound alarm: 0 to 60 seconds Centrifuge/vortex cycles: 1 to 999 Capacity: 2 non-, semi or fully skirted microplates External power supply: Input AC 120-230V, 50/60Hz, Output DC 24V Power consumption 18 W (0.75A) Input voltage: 24V DC Weight: 6.15 kg

Beckman Coulter Avanti J-HC Centrifuge This item was removed from a university lab where it was surp (more)lus to requirements. The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted. The spindle is bent. Therefore, it is listed as Spares/Repair.

Sigma 4K10 Refrigerated Centrifuge This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition internally and externally. It powers on and is in good working order when set to low temperatures, it did however remain at 26˚c when set to 37ºc. The Unit comes with 3 Different Rotors No. 1: Sigma Rotor Swing-out rotor Nr. 11140-G=960 g-5500/min-4 x 284 Bucket-12 x sample holders (3 sets of 4 ) No. 2: Sigma Rotor Nr. 12167-13000/min-G=86g No. 3: Sigma Angle Rotor 12166-No info.

MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM Maximum Speed 4,000 RPM Maximum RCF 2,250  (more)x g Maximum Capacity 6 x 50ml Features - Steel body construction with a plastic-sprayed surface for durability and aesthetic appeal - Low noise operation at less than 65 dB(A) ensures a quiet laboratory environment - Features a low temperature rise during use, preserving sample integrity - Equipped with a maintenance-free DC brushless motor for reliable and smooth operation - Microprocessor control with door cover protection enhances safety - Alarm monitoring function for real-time tracking of lock and motor status - User-friendly interface facilitates intuitive setup and operation - Real-time display of centrifugal force and operational parameters - Push-button programming and digital tube display for easy operation and monitoring - Supports various fixed-angle rotors to accommodate different testing needs - Compact dimensions make this centrifuge ideal for benchtop use The MARSHALL Select MS-CE4000 Benchtop Centrifuge is designed for optimal performance and durability, achieving a maximum speed of 4,000 RPM and an RCF of 2,250 x g. Its capacity to handle up to 6 x 50 ml tubes makes it suitable for a range of laboratory applications, from biochemistry to pharmacy. The centrifuge features a robust steel body with a plastic-sprayed surface, combining strength with an aesthetically pleasing appearance. It operates quietly with a noise level below 65 dB(A) and maintains a low temperature rise during operation, ensuring sample integrity. Equipped with a maintenance-free DC brushless motor and microprocessor control, the MS-CE4000 ensures smooth and reliable operation. The unit's safety is enhanced with door cover protection and an alarm monitoring system that keeps track of the lock and motor status. Its user-friendly interface includes push-button programming, a digital tube display for real-time parameter monitoring, and the ability to set and view centrifugal speed and time. The centrifuge is versatile, supporting various fixed-angle rotors to meet different experimental needs. With its compact dimensions (17.7 x 14.6 x 11 inches), this centrifuge is an excellent choice for laboratories seeking a reliable, multi-functional device. INCLUDED: The MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Micro (more)processor control - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This was removed from a university lab where it was surplus to requirements. The system is in reason (more)able cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented. The item is untested as it wasn't supplied with a PSU. Also included are the following:1x Delta-T Devices atmospheric temperature & humidity probeS/N: RHAI-077 1x Delta-T PC software type LS2Version 1.04 1x Desiccant Pack1x DE-9 cable1x Tutorial Kit1x Spares & Accessory Pack3x Component part (EMC directive) 5m 5x Temperature Probes User Manual1x Quantum Sensor User Manual1x Delta-T Devices Data Loggers, Sensors & Systems1x Delta-T Devices Plant Science & Solar Radiation Studies1x Delta-T Devices Image Analysis Systems1x Delta-T Logger User Manual Version 2.01

F1 Mass Standard - knob weights with adjustment chamber - set (1 g - 200 g), plastic box Number of p (more)ieces in the set: 11 Weights 1 g i 2 g – solid masses without adjusting chamber

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination Magnifaction Range 7.5x - 50x (more) Standard Working Distance 110mm Optical System Greenough Features - Stereo microscope - Trinocular head - Greenough optical system - 7.5x - 50x standard magnification - 110mm standard working distance - Pole stand with large working area - Incident illumination - 3w LED - Transmitted illumination - 3w LED - Wide variety of options The Motic SMZ-171-TLED is a stereo microscope, featuring high quality Greenough optics. Designed for versatility, the SMZ-171-TLED can be used in a variety of fields, from medical applications to industrial quality control. This rugged microscope is built to provide clear and distortion free images through many years of daily use. In its standard configuration, the SMZ-171-TLED has a working distance of 110mm, providing ample room for dissection instruments and sample manipulation. Working distance refers to the amount of space between the unit’s base and the unit’s objective, and is an important feature of any stereo microscope – the larger this number, the more room users have to operate. Magnification is controlled by a zoom knob on the microscope’s side, enabling users to adjust between 7.5x and 50x in one continuous motion. The zoom knob also contains five indents, so that precise magnifications can be quickly and accurately repeated. This is especially important when taking measurements with micrometers, reticules, and processing software. Motic also offers a wide variety of optional objectives and eyepieces, greatly expanding the magnification range from 2.25x to 200x. The SMZ-171-TLED is presented in a modular format and can be easily modified by the user. A large number of optional illumination sources, stands and filters are available, enabling users to customize the scope to suit their specific application. It is also available in both binocular and trinocular formats. Digital documentation of your work is made simple with any of Motic’s digital microscopy cameras – the Moticam. With over 20 models to choose from, these range from standard resolution, to research grade instruments with integrated cooling devices.INCLUDED: The Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination includes: - 10x Eye Piece - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty