UVP Sterilaire UV PCR Workstation Lab

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

This Applied Biosystems Veriti 96 Well Thermal Cycler was removed from a university lab where it was (more) surplus to requirements. This item powers on and is in good cosmetic condition with very minor surface damage. It has been tested with a digital thermometer (not included). It is in good working order. Block type: 96 well

Thermocycler Eppendorf Mastercycler Ep Gradient s Realplex 2 Model Thermal Cycler 5345 + 6300 EPgra (more)dient S Weight : 20 kg Voltage : 220V Dimensions 60×30×50 cm Without Software

Thermal cycler gradient Eppendorf 5331 Mastercycler Gradient. Block universal for 96 tubes of 0.2 m (more)L or 77 tubes of 0.5 mL. Control of the temperature of the block of 4 to 99°C.  Temperature-control speeds: Heating rate: approx. 3°C/s; cooling rate: approx. 2°C/s, measured on the block.Temperature Accuracy: ± 0.2°C. Storage of 100 programs. RS232 output. Includes manual. The Eppendorf 5331 Gradient MasterCycler is ideal for quantitative PCR applications and offers extremely fast temperature rise, a 1° to 20°C gradient function, short detection times and intuitive programming. The gradient block can hold 0.2 mL (capacity of 96) and 0.5 mL (capacity of 77) tubes or a microtiter plate (capacity of one), without the need to change blocks. Specifications: 230 V; 50-60 Hz; 500W Dimensions AnchxFxAlt cm: 26X41X27 Weight: 12 kg

Benchmark TC 32 Mini Thermal Cycler w/ Multi-Format Block “Mini sized” doesn’t have to mean a sacrif (more)ice on features and performance. Benchmark’s TC-32 Mini Thermal Cycler retains the advanced programming features, easy to use software and fast, reliable cycling of the larger TC-9639 Thermal Cycler, but with a smaller block and lower price point. Designed for lower throughput needs, the TC-32 Mini Thermal Cycler has a capacity for 32 x 0.2ml tubes. The wells are arranged in a 4 x 8 format, allowing the block to accept strips of 8 as well as individual tubes. The block heats and cools very quickly – at rates as fast as 5C/second. A proprietary algorithm controls block temperature, bringing samples quickly to the target temperature without any over- or under-shoot. Excellent block uniformity ensures consistency sample to sample. Operation of the thermal cycler is controlled from the large, full color, touch screen. Icon driven menus allow users to get running quickly. Programming is extremely simple and includes options for time and temperature increment/decrements, adjustable ramp rates, and an auto pause and restart functions. More than 100 typical programs can be stored in memory and easily recalled. After a run, samples can be held at 4C. An on-screen report is also available at the completion of a run. The heated lid is self adjusting – the spring loaded platen in the lid comes firmly into contact with the tops of the tubes to prevent sample evaporation and condensation. There are no knobs to turn or levers to adjust. The temperature of the heated lid can be changed or the heating function of the lid may be turned off. With a footprint less than that of the average laboratory notebook, the TC-32 Mini Thermal Cycler will fit almost anywhere. Its reduced capacity block and economical price make the TC-32 Mini Thermal Cycler the perfect choice for lower throughput laboratories and educational facilities. INCLUDED: The Benchmark TC 32 Mini Thermal Cycler w/ Multi-Format Block includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Bio-Rad C1000 Touch Thermal Cycler + CFX96 Real-Time System This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. It is in excellent cosmetic condition with minor marks from use. Included with it are; C1000 Touch Thermal Cycler Quick GuideC1000 Touch Thermal Cycler Instruction ManualCFX96 AND CFX384 Real-Time PCR Detection Systems Instruction manual

HP 6890 5973 Series G1999A GC-MS Gas Chromatograph Mass Spectrometer System This was removed from a  (more)university lab where it was surplus to requirements. The lab confirmed that it is in good working order. At our facility we have connected the system together and powered it up, but not tested further. It is in good cosmetic condition with minor marks. Included are; HP ALS ready G1530ASerial No. US00028126 HP 5973 Mass Selective DetectorG1999ASerial No.US91430461 HP 59864B Ionisation Gauge ControllerSerial No. US60103518

Samples and applications - Sample preparation for DNA and organic tissue analysis - Organic tissue d (more)ispersions TECHNICAL DATA - Rotor diameter: 3.2 mm - Stator diameter: 5 mm - Stator/rotor gap: 0,4 mm - Volume (H2O): 0,2 - 50 ml - Immersion depth: 10-50 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 4,2 m/s - Ultimate fineness, emulsions: 1 -10 µm - Ultimate fineness, suspensions: 10 -50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Application: Mass comparator AKM-2 series featuring automatic mass loader enables automatic determin (more)ation of mass deviations of a single weight in a single cycle. The system of automatic mass comparator is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E, F and M. Design and functionality: The supervising part of a mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The automatic mass loader features a basis with self-centring fields, a robot and a steel body. The digital module and the robot are located in mass comparator’s weighing chamber. The loading robot is controlled by the computer’s controller. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. Lengthwise shift of the loading robot with weights is carried out automatically using solenoid actuators. Additional software functions enable loading and taking off the weights, data processing and storing, and data export to instrument’s memory.

Ohaus EX24001 Explorer Precision High Capacity Balance, 24000 g, 0.1 g Maximum Capacity 24,000 g Rea (more)dability 0.1 g Repeatability (Typical) 0.1 g Features - High-capacity balance with a maximum capacity of 24,000g and certified readability of 1g - AutoCal automatic internal calibration maintains daily accuracy and reduces the need for external masses - Large 5.7" full-color VGA touchscreen display with adjustable three-level angle - Superior shock, spill, and splash resistance with IP54 metal base and die-cast top housing - Standard RS232 and USB communication ports with optional Ethernet connectivity - Quadrastance design and cable storage system for enhanced stability and organization - Fast stabilization time for quick and efficient measurements - Full housing in-use cover and calibration lock for added protection and security The OHAUS Explorer Balance Series offers a blend of advanced features and modern design, providing unmatched functionality for laboratory and industrial applications. With capacities ranging up to 35kg and readabilities from 0.1mg to 0.1g, these balances cater to a wide range of precision weighing needs. Key features include the AutoCal™ automatic internal calibration system, ensuring daily accuracy without the need for external weights, and a large color touchscreen that simplifies operation through an intuitive interface.Many explorer balances are designed for versatility, featuring up to 14 application modes and multiple connectivity options such as RS-232, USB, and optional Ethernet. The modular design allows for flexible workspace integration, and select models include a frameless draftshield with motorized side doors, operated via programmable touchless sensors for hands-free efficiency. AD models offer automatic door functions, enhancing convenience, while N models are NTEP certified, ensuring compliance with strict readability and repeatability standards. D models feature dynamic capacity ranges, making them adaptable for various weighing tasks.Durable construction with a metal base, stainless steel pan, and integrated weigh-below hook ensures long-lasting performance. The Explorer series also supports advanced user management, data logging, and security features, making it ideal for regulated environments. Whether for basic weighing, parts counting, or more complex measurements, the OHAUS Explorer Balance Series delivers precision, reliability, and ease of use, setting a new standard in high-performance balances. Click Here to View Product Video INCLUDED: The Ohaus EX24001 Explorer Precision High Capacity Balance, 24000 g, 0.1 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps GENIE Temp-Shaker 300 with Un (more)iversal Ratcheting Clamps provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 305 x 305mm (12 x 12in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE