Accuris PR2120-N-25BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml)

Applied Biosystems ABI Prism 7900HT This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but has the following issues. The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues. It is sold for spares/repairs. The PC is included. Dell Optiplex PCDell 17" MonitorKeyboard & MouseUSB CableDVI Cable All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

Applied Biosystems 7500 FAST Real-Time PCR System w/ PC & Software Lab This system was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The PC runs Windows 7 and has the following software installed:Life Version 2.3 7500 Lamp Hours:409The lamp was replaced on 10/20/2020. The unit has not been calibrated, as it requires an Applied Biosystems real-time PCR system spectral calibration kit. Included with it are; 1 x Box of Microamp 96-well tray for Veriflex blocks. (factory sealed)1 x Kit, primer express V3.0.1 (factory sealed)1 x Box of EnduraPlate optical 96-well fast multicolour reaction plate with barcode (factory sealed)1 x. ASSY, OPTICAL TROUBLESHOOTING PLATE BLACK1x Pack of paper fluorescent green 3-1/16 inch x 4-5/8 inch (8pcs/pkt)1x Microamp Adhesive film applicator1 x 7500 Software pack (factory sealed)5 x Kettle Leads1x Type G Gbr Irl, Mlt, Mas, Sin1x Type F    EU, Rus2x type B   Usa, Mex, Can, Jpn1x type I    Aus, Arg, Chin, Nzl

Applied Biosystems 7900HT Real-Time PCR System with 96-well block and software. 6 systems available  (more)at short notice, 84 other units with a delivery time from 4 weeks. Go for it! How does the test to detect SARS-CoV-2 work? SARS-CoV-2 is detected by smears from the mouth, nose, or throat. The smear may contain genetic material from the virus. The qualitative test is based on the principle of real-time PCR, which is a method that specifically recognizes viral RNA and amplifies it so that it is detectable by fluorescence signals.

Benchmark MultiCycler 332, MultiBlock Thermal Cycler, 3 x 32 x 0.2ml, 115V Display 10” full color  (more)touch screen with adjustable angle Block Temperature Range 4°C - 99.9°C Temperature Accuracy ≤±0.2°C (at 90°C) Features - Dual block format - 3x 32 well blocks - All accept 0.2 mL PCR tubes and strips, flat or dome caps - Each block functions independently - Block temperature range: 4°C - 99.9°C; Lid temperature range: 30 - 112°C - Intuitive Touch Screen Control - Large 10-inch adjustable touch screen - folds away when not in use - Program wizard for fast and easy programming - Advanced program features - Gradient capabilities - up to 8 temperatures per block Designed for laboratories wanting flexibility in their applications, Benchmark’s MultiCycler™ Thermal Cyclers offer multiple, independent cycling blocks in a single unit. Dual or triple block models are available, both offering extremely fast cycling profiles, large touch screen interfaces, self-adjusting heated lids, gradient capabilities, and an easy-to-use program wizard. All programming features are accessed from the large, 10” full color touch screen. The screen can be angled towards the user when in use and then tucked away to save space. A program wizard guides users through the simple protocol set up process. Advanced programming features include gradient, adjustable ramp rates, and time increments and decrements. For multi-user labs, password protection prevents interference of an existing run. A USB provides for unlimited program storage and easy transfer of protocols between MultiCycler machines. The auto-adjusting heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. Peltier units allow for exceptionally fast heating and cooling of the blocks. Temperature change is precisely and accurately controlled within tight tolerances by a proprietary algorithm that simulates sample temperature, resulting in fast runs and reproducible results. The wells are arranged in a 4×8 and 6×8 format, allowing for the use of PCR strip tubes in both models. Each block is independently controlled. INCLUDED: The Benchmark MultiCycler 332, MultiBlock Thermal Cycler, 3 x 32 x 0.2ml, 115V includes: - Power Cord - Two Year Manufacturer's Warranty

Benchmark Red Mini Centrifuge w/ Microtube and PCR Rotors The Benchmark series of mini centrifuges i (more)s ideal for quick spin downs of micro samples. The easy-open lid permits convenient single-handed operation. The clear lid and electronic safety cut-off allow the user to safely observe samples at all times. The centrifuge quickly accelerates to maximum speed (6,600 rpm / 2,200 rcf) and stops within seconds. The advanced motor mounting system provides quiet, vibration-free operation. All centrifuges include a traditional angle rotor with capacity for six standard microtubes (1.5ml to 2.0ml) as well as a strips tube rotor for 1 PCR strip or 16 individual 0.2ml tubes. Additional adapters are also included for 0.5ml tubes. The rotors can be easily interchanged by the user within a matter of seconds. INCLUDED: The Benchmark Red Mini Centrifuge w/ Microtube and PCR Rotors includes: - 6 x 1.5/2.0ml Fixed Angle Rotor - PCR Tube Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for 1 of 2 DiaMed 37 SI ID-IncubatorsThe ID incubator of the DiaMed type 37SI is ide (more)al for bringing different samples in ID cards to a temperature of 37 °C.

Advanced refrigerator for the safe storage of samples in the scientific and medical sector - Complet (more)e display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - High performance compressor for greater energy efficiency - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity - Automatic internal LED lighting for lower energy consumption COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7" touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent device - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

This was removed from a university lab where it was surplus to requirements. The system powers up bu (more)t was not tested further for safety reasons, and a laser policy at our site. It is in great cosmetic condition. Driver serial No. 102200510ADRModel Ad-2200 Laser Module serial No. 102200510Central wavelength 593nmOptical output power 50nWFB-593-050-FS-FS-0-1-ST on data plate

Eppendorf Thermomixer Comfort with block MTP for microplates. Digital display. Programable. Mixing f (more)requency from 300 to 1.400 rpm. Orbit 0.3 cm. Temperature Range from ambient -13°C to 99°C. Heating rate 5 ºC/min. Cooling rate 3 ºC/min. Accuracy ±0.5 from 20 to 45, ±2 below 20 and above 45°C. Timer from 1 min to 9:59 hours or continuous operation. It shows some signs of heavy use. User manual. The Eppendorf Thermomixer Comfort with MTP block for microplates can mix and temper microplates at the same time. Applications include enzymatic reactions, transformation, DNA, RNA, and protein manipulation, bacterial cultures, immunoprecipitation, and hybridization, among others.

Benchtop centrifuge large capacity Digtor 22. Capacity max. 4 x 750 mL. Speed max. 21.948 xg/14.300  (more)rpm. Rotors angular and oscillating to process tubes from 0.2 ml to 750 mL. LED display indicator rpm/rcf and time. Programming speed in steps of 10 rpm/10 xg. Account the back/increasing from 0 or set rpm/rcf. Watch 1 to 99 min in intervals of 1 sec, and the time indefinite. Control of acceleration/braking progressive. Mensajesdel state of the computer. Control by microcesador. PC connection. Free engine maintenance. Rotors in memory. Automatic locking and emergency. Safety stop for imbalance, an indicator of vessel where it occurs. Level noise <60 dB. Forced ventilation:it reduces the temperature increase. Rotor not included, view available on description.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW