Cleaver UV Sterilisation Cabinet for PCR Preparation Workstation CSL-UVCAB

Temperature range: 4 to 105°C Block homogeneity: ±0,2°C at 72°C Control accuracy: ±0,1°C Cooling ram (more)p rate: Max. 5°C/s Heating ramp rate: Max. 5°C/s Lid temperature range: 40 to 120°C Dimension (WxHxD): 300 x 280 x 380 mm Weight: 13,3 kg

This Corbett CG-1 Palm Cycler PCR Machine was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and is in very good cosmetic condition. We had the unit inspected by a service engineer. They have checked the system and recovered the Palm Cycler software. They ran the system through steps of range temperatures and time slots. The system runs as required within the time frame of each temperature. They inserted an external temperature probe while running the experiment. The measured temperature was close to what was set. It is in full working order. Block Spec:96 well block 96x 0.2ml tubes (read from manual)Dia 4.4mm x Depth9.6mm

Ohaus 30400128 0.2 mL PCR Plate/Tube Thermal Block The Ohaus 30400128 0.2 mL PCR Plate/Tube Thermal  (more)Block is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 0.5 in. INCLUDED: The Ohaus 30400128 0.2 mL PCR Plate/Tube Thermal Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2122-N-50BLK qMAX Multiplex One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml (more)) qMAX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. qMAX Probe One Step Multiplex kits have been designed to overcome the many challenges of multiplex RT-PCR, by addressing important factors such as the balance between magnesium chloride and deoxynucleotide concentrations, the relative Taq Polymerase and reverse transcriptase concentration, and the ionic conditions of the core reaction buffer. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2122-N-50BLK qMAX Multiplex One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SARTORIUS CUBIS MSE10202S precision balance 10200g / 0.01g New equipment in its original packaging L (more)aboratory balance Reference: MSE10202S-000-D0 Weighing capacity: 10200g (10.2kg) Readability: 0.01g Linearity: 0.02g Dimensions of weighing pan: 20.6 x 20.6 cm Weighing units: g, kg, mg, ct, lb, oz, gr oz, tael, gr, dwts, Parts per lb, moms, Austrian ct, Tola, Baht, Mesghal Calibration Type: Internal

Lot of WestBart Cryogenic Laboratory Chest Freezer Racking This was removed from a university lab w (more)here it was surplus to requirements. Included are the following; The Different Sizes of racking - 22 X 3 Shelves  External Dimensions - 14 x 14 x 56Internal Dimensions - Per Shelf 3 X - 14 x 14 x 25 - 8 X 10 Rod Shelves External Dimensions - 14 x 14 x69Internal Dimensions - Per Shelf 10 X - 14 x 14 x 6 - 8 X 8 Shelves with open sides  External Dimensions - 14 x 14 x 67Internal Dimensions - Per Shelf 8 X - 14 x 14 x 8 - 4 X 4 Shelves  External Dimensions - 56 x 14 x 42Internal Dimensions - Per Shelf 4 X - 56 - 14 - 10 - 4 X 7 Shelves External Dimensions - 56 x 14 x 42Internal Dimensions - Per Shelf 4 X - 56 - 14 - 6 - 1 X 7 shelves with notches External Dimensions - 56 x 14 x 42Internal Dimensions - Per Shelf 4 X - 56 - 14 - 6 1 X 1 shelf with 4 Side vents External Dimensions - 55 x 14 x 24Internal Dimensions - 47 x 14 x 18 1 X 40 Shelf Slots External Dimensions - 16 x 14 x 46Internal Dimensions - 16 x 14 x 42

This Antec Scientific Alexys 100 LC-EC System was removed from a university lab where it was surplus (more) to requirements. All the modules power up but have not been tested further at our facility. It is in good cosmetic condition with only minor marks from use. The lab informed us that it was working fine before it was put away about 5 years ago. There are a number of consumables included with it. The system includes; 1x LC 100Part No. 182.0035 1x AC 100Part No. 183.0035 1x LC 110Part No. 193.0035 1x AS 100Part No. 181.0037 1x Decade IIPart No. 171.0035 1x OPRPart No. 184.0035

Edwards Auto 306 Thermal Evaporator Coating System This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but displays the following error; 'Backing Error'Meaning: The backing pressure is above the pressure in pressure store 5.Action: Check that the store is correctly set (refer to Volume 2); if so, check for a leak in the system. It is in good cosmetic condition with marks from use. Included with it are; Edwards RV12 PumpSerial#: 006782397 Edwards Oil Mist Filter EMF10Code#: A223 26 000 Edwards PV25EKASerial#: 006790199 Edwards B3060421ASerial#: 006788221

F1 Mass Standard - knob weights, service case. Nominal value - 2000 kg.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.