ABI 7900HTRT-PCR

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

All-in-one PCR plate centrifuge/vortex mixer that allows for the simultaneous sample preparation of  (more)multiple samples at one time. Versatile through being able to hold non, semi and fully skirted PCR plates with no additional accessories required. The CVP-2 offers three devices in one. • Centrifuge with vortex mixing • PCR plate centrifuge • PCR plate mixer Dimensions (hxdxw): 190 x 350 x 285 mm Centrifuge mixing speed control range: 300 to 1500 rpm Vortex mixing speed control range: 300 to 1200 rpm Speed control increment: 100 rpm G-force/RCF: 245 Centrifuge timer with sound alarm: 0 to 30 minutes Vortex timer with sound alarm: 0 to 60 seconds Centrifuge/vortex cycles: 1 to 999 Capacity: 2 non-, semi or fully skirted microplates External power supply: Input AC 120-230V, 50/60Hz, Output DC 24V Power consumption 18 W (0.75A) Input voltage: 24V DC Weight: 6.15 kg

This VWR UnoCycler PCR Thermal Cycler was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and is in good working order. The touch screen is a little out of calibration but it works well with a mouse. It is in good cosmetic condition with minor marks from use.

Hermle C2417-3202 4 x PCR (32 x 0.2ml) Strip Rotor The Hermle C2417-3202 4 x PCR (32 x 0.2ml) Strip  (more)Rotor is designed for exclusive use with the Hermle MC-24 and MC-24R centrifuges. It achieves a remarkable maximum speed of 13,500 RPM and a maximum RCF of 13,602 x g, making it ideal for high-speed applications. With a capacity to accommodate 4 x PCR strips (32 x 0.2ml), this rotor is specifically tailored for PCR work, offering unparalleled adaptability for a broad spectrum of research and application needs. INCLUDED: The Hermle C2417-3202 4 x PCR (32 x 0.2ml) Strip Rotor includes: - Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2121-N-50BLK qMAX One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml)qMAX Prob (more)e One Step kits are optimized for use with popular TaqMan, Scorpions, and molecular beacon probes. Accuris qMAX™ One Step Kits allow for highly sensitive real time RT-qPCR assays to be performed directly from RNA templates. Workflows are simplified with optimized formulations of ready-to-use 2X qPCR master mix and 20X reverse transcriptase.Optimized buffer includes powerful RNase inhibitors and an extremely thermostable MMLV-derived reverse transcriptase enables robust first strand cDNA synthesis. Accuris Hot Start Taq uses an antibody mediated hot start mechanism allowing for sample preparation at room temperature. Only after an initial incubation at 95C will the Taq become active, so non-specific amplification is greatly reduced. An inert blue dye is included in the Taq master mix to help simplify pipetting and reduce errors.INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2121-N-50BLK qMAX One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Applied Thermal Control K4 K410000W Industrial Recirculating Chiller This item was removed from a un (more)iversity where it was surplus to requirement. It is in very good cosmetic condition and powers up. The previous owner has reported that the recycling water has been contaminated with coolant. It is sold for spares/repairs Product Details: Part K6NS227Serial No. 1200193 phase power supply 6kw cooling capacity2 separate circulating outputsTemp range 4 to 35˚C17L/min flow rate10 bar max

Cytocentrifuge based on Hettich Universal 320. Includes 1626 angle rotor for 6 vessels. Vmax: 4,000  (more)rpm; 2,039 g. Includes only 2 vessels with capacity for 4 cytochambers (2 per vessel). Cytochambers (not included) sample capacity from 1 to 8 mL. Maximum capacity 12 cytochambers. More vessels can be independently budgeted to complete maximum capacity. Not refrigerated. Analog rotary control and digital display (10 programs). Emergency stop. Acoustic signal. Includes manual. The Hettich cytology system makes it possible to produce a high-quality cytology preparation from a wide variety of body fluids. With large volume cytology chambers it is possible to process sample volumes of 8 ml or 2 x 8 ml. This makes cell concentration superfluous in many cases. On the other hand, when using the two-step procedure, no cells are lost during sedimentation because the cytology chamber is tightly attached to the slide. Drying is carried out in a second centrifugation step when the cells are already attached to the slide. It also allows the specific preparation of dry or wet preparations. Ideal for urinalysis, abdominal & spinal fluids, cysts, biopsies, ascites, Pap tests, CSF, viral infections, bronchial secretions, pleura, pericardium fluid, fine and needle aspiration among others.

Livestock scale H315/4I series is used to fast and precise determination of mass of cattle and swine (more) with possibility of multiple tarring in all measuring range. The weighing process is carried out with closed entering gate. Barrier height is dependent on the weighing platform dimensions. The scale features an indicator PUE H315 series in stainless steel housing. The indicator comprises a LCD backlit display and function buttons. The platform and the indicator are connected with a long cable for easy mounting of the indicator on a wall. Special software with various dampening filters enables stable and precise mass readout even if the animals are moving on the platform. An optional solution is a scale for measuring all herd of cattle.

HX7 HR scale&rsquo;s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7&rdquo; colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Jenesco Pro-24S Ozone GeneratorThe Pro-24S ozone generator is intended for use incommercial applicat (more)ions, or wherever a high output of ozone is necessary toreduce bacteria, odors, mildew, &amp; mold. It is very powerful, with ozoneoutput potential of up to 24,000 mgph, using the ozone adjustment knob. Ozonegasses are able to penetrate the infected area, attaching itself to themolecules, chemically changing the structure and destroying odors at thesource. The Pro-24 S ozone generator can cover up to 18,000 sq ft for odors,and 6,000 sq ft for mold. It features timed sequences ranging from 15 minutesto 12 hours, but also offers continuous operation simply by using the ‘hold’position on the timer knob. The hour meter registers usage up to 99,999 hours. This 10 lb 20” x 18” x 5” high generator agreat choice for a wide variety of applications. Made in the USA.INCLUDED: The Jenesco Pro-24S Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAP Expert ML/G3B Coated Motor Lift w/ G3 Vertical GlasswareFeatures - Rotation speed r (more)ange of 10 to 280 RPM - Heating bath temperature range of 20°C to 210°C - Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm - Multilingual menu and text display for error messages - Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller - Smart functions include timer and maximum temperature limitation - Optional display of vapor temperature - Highly resistant PTFE vacuum seals achieve maximum tightness and reduce expensive spare parts - Available in hand lift or motor lift models - USB and Micro SD interfaces featured 5" touch screen display with clear display of all values, featuring basic and advanced views, along with additional smart functions Separate knobs for rotation and heating with locking function to prevent accidental adjustments, along with LED ring lights Safety heating bath with overheat and dry run protection, featuring ergonomic handles for easy removal/disposal of contents The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert ML/G3B Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3B Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty