Accuris PR2001-H-1000 qMAX Probe, High Rox qPCR Mix, 1000 Reactions

See attached document for more information.

This Techne Flexigene FFG02FSD Bench-Top Thermal Cycler was removed from a laboratory where it was s (more)urplus to requirements. The unit is in good condition but is showing signs of wear. It powers on, and a basic program was run to test the lid and the sample tray heater, which is working. It has not been tested further.

Corbett Research Rotor-Gene RG-6000 rtPCR Analyser Lab This item is sold on behalf of a client. It i (more)s surplus to requirements. It is in good cosmetic condition and full working order. It is available for collection from London, UK, but we may be able to offer shipping for an additional fee. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes:- 16A 1Phase cable

Set probes + probe checkers consisting of the following: 2x MCP-HTP12, UR type probe 1x matching pro (more)be checker MCP-TRUR 1x MCP-HTP15, UR-SS type probe 1x matching probe checker MCP-TRURSS 1x MCP-HTP16, UR-100 type probe 1x matching probe checker MCP-TRUR 1x MCP-HTP11, UA type probe 1x matching probe checker MCP-TRUA 1x probe type URS 1x matching probe checker MCP-TRURS 1x MCP-FS01 footswitch 2x MCP-ST0, type UFL 1x MCP-SWB02 switch

S+B Door cabinet low DD D.Grey 1200

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Memmert HPP2200eco Climate Chamber 2140L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 2140 L (75.6 cu. ft.) Features - Spacious 2140 L (75.6 cu. ft.) capacity for ample storage and incubation - Temperature range from +15 to +60 °C with humidity, or 0 to +70 °C without humidity - Precise 0.1 °C temperature control accuracy with dual Pt100 sensors - Humidity adjustable from 10% to 80% RH with external distilled water supply - TwinDISPLAY with PID microprocessor control and high-definition TFT screens - Programmable via AtmoCONTROL software with USB and Ethernet connectivity - AutoSAFETY protection with visual and acoustic alarms for temperature regulation - Stainless steel door with inner glass panes and 2-point compression locking system The Memmert HPP2200eco Climate Chamber 2140L, 115V offers exceptional capacity and control for rigorous storage, incubation, and environmental testing needs. With a spacious 2140-liter interior, this chamber provides a temperature range from +15 to +60 °C with humidity and 0 to +70 °C without humidity, giving precise control over varied storage environments. Dual Pt100 temperature sensors ensure accuracy within 0.1 °C, while humidity control ranges from 10% to 80% RH, supported by an external distilled water supply system and advanced humidification and dehumidification features. Engineered for easy management, the HPP2200eco features Memmert’s TwinDISPLAY with a PID microprocessor and vibrant TFT displays, delivering real-time data at a glance. Program settings via the AtmoCONTROL software over USB or Ethernet for versatile operation, and enjoy peace of mind with Memmert’s AutoSAFETY system, which provides visual and acoustic alarms for over- and undertemperature protection. Built with a durable stainless steel door with inner glass panes and a secure 2-point compression locking system, this chamber meets the high standards required for lab precision and safety. INCLUDED: TheMemmert HPP2200eco Climate Chamber 2140L, 115V includes: - 6 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

KNF UN820.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 20L/min (1.2 m3/ (more)h) Protection Class IP44 Features - 100% oil free transfer - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically-resistant PTFE/FFPM flowpath - Suitable for aggressive or corrosive gases and vapors - Maintenance-free - Environmentally friendly - Compact, quiet and reliable TheKNF UN820.3FTP IP44 Diaphragm Pump isa dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN820.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty