Applied Biosystems 7900HT Fast Real Time PCR System with 7067/4 Stacker Lab

This Analytik Jena AlphaSC Samplerblock Thermal Cycler was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and runs. It is in good cosmetic condition with marks from use. 48/R9-96/R4.5340:720.14

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

Block: Gold anodized 96 well block Maximum Heating Rate: 3.5°C/sec Maximum Cooling Rate: 2.5°C/sec A (more)vg Heating Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity at 55°C: ± 0.2°C within 15 sec Temperature Uniformity at 70 °C: ± 0.3°C within 15 sec Temperature Uniformity at 95 °C: ± 0.6°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range: 20 to 99°C Control Accuracy: ± 0.1°C Programming: Easy spreadsheet programming Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Heated Lid: High Performance Smart Lid (HPSL) Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13 kg

Hermle 4 x pcr rotor The Hermle 4 x PCR rotor is designed to provide efficient and reliable sample p (more)rocessing in PCR applications. This rotor is compatible with the Hermle Z32-HK, Z327, and Z446 series centrifuges, making it an excellent addition to any laboratory using these centrifuges. The rotor has a maximum speed of 15,000 RPM and a maximum relative centrifugal force (RCF) of 15,343 x g, allowing for fast and efficient sample processing. The rotor has a 45° angle, which ensures the samples are held securely in place and can be easily accessed. This rotor can hold up to 4 x 8-Place PCR strips, providing a total capacity of 32 samples per run. This makes it ideal for laboratories that require a high throughput of samples in PCR applications. The rotor is made from high-quality materials, ensuring its durability and longevity even with repeated use. Its design allows for easy and quick loading and unloading of samples, increasing the efficiency of the centrifugation process. INCLUDED: The Hermle 4 x pcr rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

F2 Mass Standard - knob weights, service case.

Scilogex DS-160/T7 Saw-tooth Generator ProbeThe Scilogex DS-160/T7 Saw-tooth Generator Probe is for  (more)use with D160 Homogenizer and has a diameter of 7mm x 130mm. The Scilogex DS-160/T7 is for tissue and can hold volumes 1-50mL.INCLUDED: The Scilogex DS-160/T7 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

2x Plate washer uWasher DG-34 Grifols (One in good condition, 1 for parts)