Perkin Elmer Fusion A Microplate Reader Model: A153603 Lab

Perkin Elmer Victor3 1420 Multilabel Counter & Liquid Dispenser This was removed from a universi (more)ty lab where it was surplus to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. Model - Victor 3PN - 1420-012SN - 4207484 Liquid DispenserPN - 1420-2550SN - 420250011 Both units are connected together and both power on. Comes with:-RS232 CableARCNET CableSoftware/Manual:-1420 Software Version 3.0 Revision 5 (1086 3390-40 D)WorkOut2 Data Analysis Software Version 2.0 (1420-3050)1420 Multilabel Counter Instrument Manual

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Tecan Model: Infinite M200 Pro Description: Tecan's Infinite M200 PRO offers a wide ra (more)nge of leading detection methods. The Infinite M200 PRO's Quad4 monochromators provide exceptional sensitivity and allow the user to select any wavelength from UV to NIR and perform absorption, excitation and emission scans. The user can access all wavelengths and switch from upper to lower readings, allowing for an easy measurement of multiplexed assays. Configuration: 30050430 Option Mono FI Top 30015894 Option Mono Absorbance 30015897 Option PMT Enhanced 30050008 Option Luminescence 30015903 Option Heating 30071760 Option Gas CO" + O2 enhanced Scope of delivery - Tecan Infinite M200 Pro Reader - Computer with pre-installed Magellan software - Connection cable & power cable - Instruction manual as PDF   The system is in absolute top condition and has been 100% tested for function.

Sartorius Certomat BS-1 Double Stack Shaking Incubator This item was removed from a university labor (more)atory where it was surplus to requirements. Both incubator units are in good used cosmetic condition and power on, but each has functional issues:- Top Unit: Heats up as expected but does not shake. - Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence. Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.

This LabTech LT-3500 Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and runs through the cleaning cycles, though they cannot be completed without the cleaning bottles. It was not tested further. It is in reasonably good cosmetic condition but the screen is slightly damaged. It is still responsive and mostly readable though.

IKA Eurostar 20 High Speed Control Overhead Stirrer Stirring quantity max. per stirring position ( (more)H2O) 20 l Deviation of speed measurement n 300rpm 1 ±% Temperature Measuring Range -10 - +350 °C Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery High speed laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 - 6000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters, and an update of the current firmware. An integrated torque trend display is provided for the measurement of viscosity changes. The included precision stirrer shaft is 280 mm long and has a maximum immersion depth of 220 mm. INCLUDED: The IKA Eurostar 20 High Speed Control Overhead Stirrer includes: - EUROSTAR 20 high speed control - R 6000 precision shaft - Open-end wrench - Hook spanner - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 20 High Speed Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input176 WMotor rating output125 WMotor principleBrushless DCSpeed displayTFTSpeed range0/150 - 6000 rpmIntermittent operationyes Viscosity max.10000 mPas Output max. at stirring shaft125 W Permissible ON time100 %Torque max. at stirring shaft20 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningspecial output shaftConnection for ext. temperature sensorPT1000Temperature displayyesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I6 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 325 x 230 mmWeight5.242 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of IKA Eurostar Control Overhead StirrersSpecsEurostar 20Eurostar 60Eurostar 100Eurostar 200Eurostar 400Stirring quantity max. per stirring position (H2O)20 l40 l100 l100 l150 lSpeed range0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity max.10000 mPas50000 mPas70000 mPas100000 mPas100000 mPasTorque max. at stirring shaft20 Ncm60 Ncm100 Ncm200 Ncm400 NcmPower input176 W176 W186 W130 W226 WSetting accuracy speed1 ±rpm1 ±rpm1 ±rpm1 ±rpm1 ±rpm.comparison-table tr td:nth-child(2) { background-color: #fffacd;}

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Refrigerated centrifuge THERMO ELECTRON JOUAN GR4I With Rotor 11175338 Type: GR 4i Maximum centrifug (more)e speed: 8000 rpm refrigerated Voltage: 230V / 50/60Hz 1500 W Net weight: 200kg Maximum load: 3.6 kg Temperature range: -9 ° C to 40 ° C Dimensions (H x W x D): 80 x 85 x 66 cm With swinging bucket rotor 11175338 Maximum rotor speed: 4750 rpm With 4 M4 pods 11174218 with a capacity of 750ml + cover Replacement date on the Rotor: 09/2022 In good condition one of the corners of the front panel slightly deteriorated Year of manufacture: 2004