MSD Sector Imager 2400 Microplate Reader

This Metertech Microplate Reader Model M960 was removed from a university lab where it was surplus t (more)o requirements. The item powers on with the plate door opening/closing and the lamp working. We were unable to test any further. The item is in a reasonable, used cosmetic condition and comes with a manual.

This Perkin Elmer Wallac 1420 Victor 2 Multi-Label Counter Microplate Reader was removed from a univ (more)ersity lab where it was surplus to requirements. The unit has been professionally serviced and is in good working order. A full detailed report is available on request. It is in very good cosmetic condition with only minor marks.

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

COMBISTORAGE 60 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely mad (more)e of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 1 painted steel shelf + 1 retention tank with grid - ACID/BASE COMPARTMENT: 3 plastic-coated steel shelves (max load 60 Kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit This system was removed from a un (more)iversity lab where it was surplus to requirements. The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp. Due to the faults listed above, this system is listed as Spares/Repair. The system comprises the following:- Leitz Vario Orthomat Controller - Leitz Power Supply for Lamp - Leitz Vario Orthomat 2 Camera - Leitz Wetzlar 100W Lamp (Type: 307-143.003) 5 x Objectives:- NPL Fluotar 6.3/0.20 - NPL Fluotar 16/0.45 - NPL Fluotar 40/0.70 - Leitz EF 63/0.85 - Leitz PL 2.5/0.08 2 x Leitz Eyepieces Periplan GW 10x MModel: Dialux 22-

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.

Motic AE2000 Digital Trinocular Transmitted Light Inverted Microscope w/ Moticam BMH4000X Microscope (more) Camera Objectives CCIS® Plan Achromatic, DIN 4X, PH10X Fine Focus Precision Color Corrected Infinity Optical System (CCIS®) Transmitted Illumination (FPS) Quartz Halogen 6V/30W with Intensity Control Features - Color Corrected Infinity Optical System (CCIS®) for excellent image quality - Iris diaphragm for precise light control - Sturdy stage with metal and glass inserts for stable sample placement - Supports brightfield and phase contrast with a phase slider - Inverted stand suitable for routine microbiology and cell cultures - 8MP sensor for detailed and clear images - Features auto/manual exposure, white balance, saturation, contrast, and more - Includes multiple varying petri dishes, and a universal mechanical stage with well plate holders to ensure simplicity in cell culture applications

Accuris PR1000-HF-1000 High Fidelity DNA Polymerase, 1000 Units For applications requiring highly ac (more)curate amplification, and full control of enzyme concentration, choose our High Fidelity DNA polymerase kit. Our polymerase enzyme has been genetically modified for better solubility and higher activity across a broad range of ionic conditions, and will amplify a wide range of targets, including those that are GC or AT rich as well as crude DNA samples. INCLUDED: The Accuris PR1000-HF-1000 High Fidelity DNA Polymerase, 1000 Units includes: - Accuris High Fidelity DNA Polymerase 1000 Reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty