Labtech LT-4000 Microplate Reader Lab

BERTHOLD TECHNOLOGIES MITHRAS LB 940 Multimode microplate reader Plate reader for luminescence and f (more)luorescence Number : 38099-33 Untested equipment Without a computer Without software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

This Labsystems Multiskan MS Type 352 Microplate Reader was removed from a university lab where it w (more)as surplus to requirements. the unit is in good cosmetic condition but does have some marks from use. The unit powers up and goes through calibration on startup. It has not been tested further.

LabSystems IEMS Reader MF 1401 with Genesis Software This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with minor marks. It comes with;-LabSystems Genesis software-Dust cover

Canon XF305 HD Video Camera Camcorder With Tripod This item was removed from a university where it w (more)as surplus to requirement. It is in reasonably good cosmetic condition and good working order, we are unable to test it fully at our facility. The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client. Batteries, case &amp; tripod included. No charger included.

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with marks from use. 4 x Shelves - 71 x 69cm Model - Revco UXFModel no. UXF50086V63SN - 0132487401131018

MARSHALL Select MS-RO80 Tube Rotator Mixer, 0-80 RPM Speed Range 10 to 80 RPM Motor Type DC Motor Op (more)erating Mode Continuous Features - Offers a speed range of 0 to 80 RPM for versatile mixing applications - Made with a stainless steel plate and oxidation coating for corrosion resistance - Features both plastic and stainless steel clips for flexible tube accommodation - Supports continuous mixing for consistent and reliable performance - Equipped with a DC motor for dependable and maintenance-free operation - Compact design ensures efficiency in space usage The MARSHALL Select MS-RO80 Tube Rotator Mixer is designed for precise and versatile mixing in laboratory settings, offering an adjustable speed range from 0 to 80 RPM. With its robust stainless steel plate featuring an oxidation coating, this mixer ensures durability and resistance to corrosion. The rotator's adjustable mixing angle, ranging from 0 to 90 degrees, allows for customized agitation tailored to a variety of sample types and sizes. It comes equipped with both plastic and stainless steel clips, offering flexibility to accommodate different laboratory needs. The scale display provides clear and easy monitoring of speed settings, making it simple to achieve the desired mixing conditions. Built with a reliable DC motor, the MS-RO80 operates continuously, supporting a broad range of applications in research and clinical laboratories. Its compact dimensions of 8.6 x 11.8 x 12.2 inches and lightweight design make it a convenient addition to any lab bench. Designed to operate efficiently within an ambient temperature range of 5 to 40°C and a relative humidity of up to 80%, this tube rotator mixer is adaptable to various environmental conditions. With a power consumption of only 20W and protection type IP21, it is both energy-efficient and safe for everyday use. The MS-RO80 supports a wide array of optional accessories, enhancing its versatility for diverse mixing tasks. Its broad electrical compatibility (100-240V, 50/60Hz) makes it suitable for use in laboratories around the world. INCLUDED: The MARSHALL Select MS-RO80 Tube Rotator Mixer, 0-80 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F1 Mass Standard - knob weights, wooden box. Nominal value - 200 kg.

CY10 scale&rsquo;s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance&rsquo;s memory &ndash; either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Heidolph 036110234 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 145mm Plate Temperature Range (more) 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110234 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (145 mm diameter) - Pt1000 Temperature Sensor for Precise Temperature Regulation - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty