Labtech LT-4000 ELISA Microplate Reader Standalone Touch Control 405 450 492 630

This Dynatech MR 250 Microplate Reader was removed from a university lab where it was surplus to req (more)uirements. The item powers on with the lamp working, and it printed out some info after the initial warm-up sequence. It is in reasonably good cosmetic condition but has some marks from use.

This Metertech Microplate Reader Model M960 was removed from a university lab where it was surplus t (more)o requirements. The item powers on with the plate door opening/closing and the lamp working. We were unable to test any further. The item is in a reasonable, used cosmetic condition and comes with a manual.

Tecan Infinite F50 Microplate Reader This system was removed from a university lab where it was surp (more)lus to requirements. It is in good cosmetic condition and working order. This system includes the following: - Tecan i-control software - Dell Windows 7 PC Set-Up. Power supply included.

This Perkin Elmer Fusion A Microplate Reader  Model: A153603 was removed from a university lab  (more)where it was surplus to requirements. The system has been professionally serviced and is in full working order. The PC does continually come up with a server busy message, and we have been unable to resolve that, but there is a workaround. The system is fitted with a 400mw laser. The instrument is functioning fine and can run samples smoothly. Failed PMT Dark Count (Photon Counting) - Failed due to high thermal electron current in the PMT due to high voltage in this mode. This will not affect the functionality of the instrument. Passed PMT Dark (Charge Integration) and LED Control. Server Busy message - This action cannot be completed because the other program is busy. Choose ‘Switch to’ to activate the busy program and correct the problem. It is in very good cosmetic condition with only minor marks from use.

Vortex Top-Mix 94323 BIOBLOCK SCIENTIFIC Type: REAX 2000 Heidolph laboratory shaker, model REAX 2000 (more). Technical specifications: 220 V, 50 Hz, 42 W. Speed: 200 – 2400 1/min. Agitator dimensions (ø): 2 cm. Agitator dimensions (D)x(H)x(B): 14.5 x 12 x 13 cm. Includes continuous and touch mode

Lasers: Blue Solid State: 488 nm, 55 mW, Software Controlled Red Solid State Diode: 638 nm, 50 mW, S (more)oftware Controlled Violet Solid State: 405 nm, 80 mW, Software Controlled Configuration: Nominal 90 µm spatially separated beam spots Flow cell: 430 µm x 180 µm rectangular channel Collection optics: Fixed integrated optics and quartz flow cell design with a numerical aperture of > 1.2 Detector filters: Forward Scatter: 488/20 Blue Laser: 525/40, 575/30, 614/20 , 675/20, 695/30, 755LP Dyes: FITC, PE, ECD, PC5 or PEC5.5, PECy7 Red Laser: 660/20, 725/20, 755 LP Dyes: APC or Alexa Fluor 647, APC-Alexa Fluor 700, APC-Cy7, APC-Alexa Fluor 750 Violet Laser: 450/50, 550/40 Dyes: Pacific Blue, Krome Orange Forward Scatter Detector: Fourier design providing up to 3 measurements of forward angle Side Scatter Detector: High performance photodiode with electronic attenuation Fluorescence Detectors: FL1 – FL6 Fluorescent Detectors Flow rates: Continuous pressure is applied to the sample tube based on user selected flow rates: Low, Medium and High Performance: Carryover: < 0.1%, Dead volume as low as 2 µL when using Beckman Coulter 12 x 75 mm polypropylene tube and adjustable probe Acquisition modes: 32 tube Multi Carousel Loader (MCL), Single tube sampling mode, Automated work list acquisition, Manual work list mode Mixing: The MCL vortexes each tube individually before sample acquisition Barcode reading: Carousel number, tube location, and tube barcode verified to worklist Biosafety: Biohazard contained wash station thoroughly rinses sample probe Throughput: 10000 normal leukocytes is 82 tubes/hour Scatter resolution: Resolves 0.4 micron particles from background noise using Forward Scatter, Maximum detection of up to 40 microns Fluorescence sensitivity: FITC < 107 MESF, PE < 64 MESF, PC5 < 13 MESF Acquisition rate: 25000 events per second, 90% yield Cytometer dimensions (WxHxD): 950 x 610 x 730 mm Cytometer weight: 104 kg Supply cart dimensions (WxHxD): 724 x 298 x 495 mm Supply cart weight: 30 kg Software included but requires a new licence purchase.

Memmert ICH110L Stability Climate Chamber w/ Light 108L, 115V Temperature Range -10°C to 60°C w/o H (more)umidity (+10°C to 60°C w/ Humidity and/or Light) Humidity Control 10 to 80% RH Chamber Volume 108L (3.8 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Integrated illumination box with programmable daylight (6,500 K) and UV light for precise light control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH110L Stability Climate Chamber w/ Light 108L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH110L is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH110L is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. The ICH110L model includes an advanced illumination box integrated into the upper interior, equipped with fluorescent lamps providing cold white light (daylight: light color 865, 6,500 K) and UV radiation within the 320 to 400 nm spectral range. This setup replicates standard light D65, essential for tests that require precise light conditions. Both daylight and UV light can be individually programmed through the controller, offering tailored adjustment for specific testing needs. Light intensity is maintained with high accuracy, at ± 6% for cold white light and ± 10% for UV light, ensuring consistent conditions for reliable test results. INCLUDED: TheMemmert ICH110L Stability Climate Chamber w/ Light 108L, 115V includes: - Illumination Box - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select Multichannel P8x20, 2-20 uL PipetteFeatures - Designed to be ergonomic, saf (more)e, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 2 to 20 uL - 3 Year Manufacturer's Warranty

Eppendorf F-45-48-PCR Fixed Angle Rotor 48 x 0.2ml The Eppendorf F-45-48-PCR Fixed Angle Rotor 48 x  (more)0.2ml is for PCR strip use with the Eppendorf 5417C and 5417R Centrifuges, never used, new in box. INCLUDED: The Eppendorf F-45-48-PCR Fixed Angle Rotor 48 x 0.2ml includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-48-PCR Rotor SpecificationsMax Speed10,000 RPMMax RCF10,600 x gCapacity48 x 0.2 mL