Genetix Qpix2XT Benchtop Colony Picker with Software & Accessories

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to  (more)requirements. The system powers up but has not been tested further at our facility. The system is in very good cosmetic condition with only minor marks from use. Included are; 1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific 1250 Pump.Set of Accessories

Redd & Whyte Preddator Liquid Handling Robot System This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use. There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system. 1x Windows XP Professional Installation CD 20021x Dell Monitor Software CD1x Dell Installation Software CD1x Windows XP Professional Installation CD, discs1, 2, 3 and 41x Datalogic WinHost 2.00 Configuration CD 20041x Moxa Networking CD1x Windows XP Professional Guide Pamphlet

Beckman Coulter Biomek NXp Laboratory Automation Workstation This item was removed from a university (more) lab where it was surplus to requirements. The unit powers on and is in good cosmetic condition with some surface wear. Without the software, the robotic functions were unable to be tested, so no further functional testing was conducted. Model: Biomek NXpSerial No.: A318400876 Additional Components:- DFMZ Design Filtration Microzone - Model: DA1-1x2-2 - Serial No.: 952213 Accessories Included:- Insert Pak 11mm Non-Sterile - Serial No.: 3364 - 2 x Top Plate, Multi-Config Peltier ALP - Part Number: A32165 REV AA - 15 x Reservoirs, 75 ml, Case Sterile - Lot: P61122MPI - Physical Manual: Version 3.3 Tutorial

This Beckman Coulter TQ-Prep Model 2428 was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition but has some minor marks from use. It powers up, but we are unable to test it further at our facility.

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

Thermo Scientific Multidrop™ Combi Reagent Dispenser This item was removed from a university where i (more)t was surplus to requirements. This item is brand new in its original packaging, it was removed only to photograph its contents. Specifications: - Cat No.: 5840300 - Manufacture Date: 2021-01-03

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Branson Support Stand with Rod The support stand with stainless steel rod accommodates Branson’scon (more)verter and accessories (converter clamp for use with SFX and SLP sonifierssold separately). The converter clamp supports the ultrasonic stack (converterand horn) and is easily adjusted to properly position the horn in the sample. Thestand features a black enameled cast-iron base with zinc-plated rod. A fullacoustic sound enclosure is also available for sound-sensitive environments. Stand Base Dimensions (L x W x H)9 x 5.5 x 24 in Rod Dimensions (H x Dia.)24 x ½ in

Eppendorf 16 x 3-15ml Adapters, Cat. # 022638721 The Eppendorf 16 x 3-15ml Adapters, Cat. # 02263872 (more)1 are for use with the Eppendorf A-4-81 Swing Bucket Rotor for the Eppendorf 5810/R Centrifuges. These adapters feature a capacity for 16 x 3-15ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 16mm x 108mm (130mm in 2 inner rows). This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 16 x 3-15ml Adapters, Cat. # 022638721 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 16 x 3-15ml Adapters, Cat. # 022638721 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-81 Swing Bucket Rotor

A&D Weighing Phoenix GH-120 Analytical Balance, 120 g, 0.1 mg Capacity 120 g Readability 0.1 mg (more) Repeatability 0.1 mg Features - OES technology offers high performance and a wider range of models with reliable accuracy & precision - Adjustable environmental (manual or automatic) response characteristics to help cope with the effect of drafts and vibrations - Automatic self calibration to maintain accuracy under temperature changes - Save time with one-touch Full Digital Calibration FDC (Internal or External). Makes calibration simple to perform within seconds - Easy to clean and operate with anti-static glass breeze break and SS steal pan, spill proof ring and base plate - Advance stabilization bandwidth allows for fast response times - Auto power on ensures ready-to-use and optimal performance every time, reducing warm up/wait time - Balance ID and Clock/Calendar function allows for time & date stamps and GLP reports - Data memory plus the ability to export through bidirectional RS-232C or optional USB, Bluetooth & Ethernet - Underhook capability for density measurement and weighing of large or magnetic materials The A&D Weighing Phoenix GH-120 Analytical Balance, 120 g, 0.1 mg, brings precision and reliability to the lab with advanced features tailored for demanding applications. Leveraging high-performance OES technology, this model ensures exceptional accuracy across a wide range of tasks, and its adjustable environmental response characteristics help counteract the effects of drafts and vibrations, creating a stable weighing environment. Built for ease of use and durability, the GH-120 features an anti-static glass breeze break, a stainless steel weighing pan, and a spill-proof ring—all of which streamline maintenance and extend the unit's operational life. Engineered to save time and increase productivity, the GH-120 includes automatic self-calibration to uphold measurement accuracy even with temperature shifts. The one-touch Full Digital Calibration (FDC) function allows quick and straightforward calibration within seconds, whether using internal or external calibration. Fast stabilization times ensure that precise readings are available with minimal waiting, supporting smooth workflows in fast-paced lab settings. For comprehensive data management, the Phoenix GH-120 features a balance ID, a clock/calendar function for time-stamped GLP reporting, and extensive data memory capabilities. Connectivity options include standard RS-232C, with additional choices for USB, Bluetooth, and Ethernet to meet diverse data-sharing requirements. Designed with flexibility, this balance also includes underhook weighing for density measurements and supports multiple measurement units, making it an invaluable tool for labs requiring high-precision and adaptable weighing solutions. Supported by a comprehensive 5-year warranty, ensuring long term reliability and peace of mind for all your precision weighing needs. INCLUDED: The A&D Weighing Phoenix GH-120 Analytical Balance, 120 g, 0.1 mg includes: - Anti-Static Glass Breeze Break - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - Floor Plate - Terminal Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The Rotor Beater Mill SR 200 is suitable for coarse and fine size reduction, either in batches or co (more)ntinuously. It can process dry, soft, medium-hard, organic and inorganic substances. The SR 200 is intended for universal use: from sample preparation in laboratories up to preparing sample batches in pilot plants or production facilities. Application Examples: Bentonite, chemical products, coal, coke, drugs, feed pellets, fertilizers, food, graphite, gypsum, herbs, pharmaceutical materials, plant materials, plastics, powder coating, resins, rice, salts, seeds, soils, spices, sugar… Product Advantages: Suitable for batchwise operation of larger quantities High final fineness Exchangeable grinding and sieve inserts Quick-action door lock and motor brake Defined final fineness due to bottom sieves with aperture sizes from 0.08 – 10 mm Maximum peripheral rotor speed 24.5 m/s

Thermolabil VR-180 Pharmacy Edition refrigerator. Refrigerator designed for the storage of medicines (more) and thermolabiles. Capacity: 130 L. Dimensions: 50,5 x 57 x 93,5 cm. Shelves: Three, adjustable in height. Stable temperature between 4º and 8ºC. Digital display. dynamic cold. Double digital thermostat, one of them for security. Acoustic and visual alarm for temperature range jump. Glass door with double glazing and standard lock. Height adjustable legs. LED lighting inside. Ecological refrigerant without CFC. Automatic defrost system. Orifice for external probe. User manual. *Offer valid until end of stock.