Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, 115V

BINDER BD-115 incubator / oven with forced convection 100 ° C Model: BD115 ventilated Capacity: 115  (more)liters Temperature range: Room temperature plus 5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Year of manufacture: 2010 Tested at 37 ° C

This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested with a digital thermometer (not included) The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours. The item is in a reasonable, used cosmetic condition with some minor marks from use. Internal dimensions - D33 W45 H53cm

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 This was removed from a university lab w (more)here it was surplus to requirements. The unit has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. 2 Shelves - 52 x 48cm

Incubator orbital FS Series. Ideal for incubation with agitation of microbiological cultures. Model (more)s: FS-50B (not refrigerated; temperature of RT+5ºC to 65ºC.); FS-70B (refrigerated; temperature 4ºC to 65ºC.). LCD screen. Control of temperature, time and speed of swing digital. Stability ± 0.1 º. Uniformity ± 1°. Variable speed of 30 to 300 rpm. Resolution 0.1 ºC, ± 1rpm. Timer from 1 min to 9999min. Engine without maintenance. Alarms. Capacity FS-50B: 10 kg; 100ml*16/250*10/500*6 (includes 8 clamps for flask of 250 mL). Capacity FS-70B: 15 kg; 100ml*28/250*15/500*8/1000*6 (includes 12 clamps for flask of 250 mL). It shows the price for the model FS-50B. For other models, use the drop-down.

Memmert IF30 Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 74 L (2.6 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides - Max. loading capacity of chamber is 132 lbs, with each shelf supporting up to 44 lbs The Memmert IF30 Forced Circulation Incubator 32L, 115V is designed to deliver precise temperature control and uniform heating for a wide range of laboratory applications. With a setting temperature range from +20°C to +80°C and a working temperature range starting at 10°C above ambient, this incubator ensures reliable thermal processing. The 32L (1.1 cu.ft.) chamber, crafted from durable stainless steel with deep-drawn ribbing, is reinforced for easy cleaning and long-lasting durability. Equipped with the advanced ControlCOCKPIT, a multifunctional digital PID-microprocessor controller featuring a high-definition TFT-color display, users can easily adjust key parameters like temperature, fan speed, air flap position, and program time. To enhance operational efficiency, the IF30 incubator features forced air circulation by a quiet air turbine, adjustable in 10% increments, with an option for pre-heated fresh air admixture. Safety is prioritized through an adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880. Additionally, the incubator’s maximum chamber load is 132 lbs, with each shelf capable of supporting up to 44 lbs, making it a robust and dependable choice for precise temperature-controlled applications. INCLUDED: TheMemmert IF30 Forced Circulation Incubator 32L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF55 Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 53 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF55 Forced Circulation Incubator 53L, 115V offers precise temperature control and efficient forced air circulation, making it ideal for a variety of laboratory applications. With a setting temperature range of +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures consistent performance for temperature-sensitive processes. The spacious 53L (1.1 cu.ft.) interior is made from reinforced stainless steel, designed for easy cleaning and long-lasting durability. Its ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, complete with a high-definition TFT-color display, allows for accurate adjustments of parameters such as temperature, fan speed, air flap position, and program time. In addition to its advanced functionality, the IF55 includes several safety features, such as an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meet protection class 1 standards according to DIN 12880. The forced air circulation system, powered by a quiet air turbine adjustable in 10% steps, includes the option for pre-heated fresh air admixture to further enhance control over the incubation environment. With a maximum chamber load of 176 lbs and each shelf supporting up to 44 lbs, the IF55 is built for reliability and precision, offering advanced AtmoCONTROL software for programming and data management via Ethernet or USB. INCLUDED: TheMemmert IF55 Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of ECO Silver immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Polyscience 6260MXCRY10C-V Cryoprecipitate Bath (Variable setpoint 4 to 40°C), 120V, 60Hz3D Visualiz (more)ation of the Polyscience Cryoprecipitate BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The PolyScience Cryoprecipitate Bath is a self-contained, custom-designed Recirculating Chiller designed for the safe, reliable thawing of Fresh Frozen Plasma (FFP) for the recovery of Cryoprecipitated Antihemophilic Factor (AHF). It is capable of thawing up to 24 units of FFP or whole blood (WB) simultaneously. Features - 13.8 gallon (52.24 liter) reservoir - Removable, center-hinged reservoir cover - 4°C preset thawing temperature - Bright temperature and elapsed time displays - Calibration capability - Removable, high-efficiency fluid filter - Reservoir drain - Over-temperature and flow alarms INCLUDED: The Polyscience 6260MXCRY10C-V Cryoprecipitate Bath (Variable setpoint 4 to 40°C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty