Witeg ThermoStable IR-250 Refrigerated Incubator

This LMS Counter-Top Laboratory Cooled Incubator was removed from a university lab where it was surp (more)lus to requirements. The unit powers on and has been tested with a digital thermometer (not included). Set at 4ºC our thermometer read 4ºCSet at -10ºC our thermometer read -4.8ºCThe unit had been running for a number of hours and settled at -4.8ºC Set at 22ºC our thermometer read 22.9ºCSet  at 30ºC our thermometer read 30.9ºC The unit is lockable however there is no key supplied with this unit. I recommend a replacement barrel and key. Interior dimensions:W45cm x H43cm x D28cm

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

This item has just arrived in our stock. Please enquire for further details.

Memmert BE300 incubator. Capacity 39 L. Max temperature: 70ºC. Stainless steel. 2 shelves. Inner gla (more)ss door. Ignition module: 3 indicators, fresh air regulator and manual ignition controller. Work control module: rotary controller and set for temperature and programs. Timer from 1 to 999 min. Overheating control and time self-diagnosis. RS232C. Dimensions (LHD): inner 480*320*250 mm, external 630*435*595 mm. Includes manual. Optimize your experiments with the Memmert BE300 Incubator, available at Galileo Equipment. Perfect for applications in microbiology, cell research, and stability testing, this oven offers precise temperature control and thermal uniformity. Its robust design and advanced technology guarantee consistent and reliable results. With ease of use and energy efficiency, the Memmert BE300 is the ideal choice for demanding laboratories. Buy now and take advantage of our exclusive offers to improve your laboratory performance with this high-quality oven!

Benchmark MyTemp Mini CO2 Digital Incubator At only 13 inches wide, the myTemp Mini CO2 is the small (more)est and most economical incubator for applications requiring CO2 gas control. Its small footprint makes the incubator ideal for use inside of biological safety cabinets, isolating sensitive cultures or for any laboratory simply trying to conserve bench space. With a thick layer of high efficiency insulation surrounding the chamber, the incubator is also ideal for transportation of cells. Once power has been disconnected, the incubator maintains temperature levels within 10% of the set parameter for up to 1 hour. In addition each model includes a 12V vehicle power adapter for operating the instrument in a car, boat, etc. Both temperature and CO2 percentage are digitally adjustable and displayed in real time on the large LED control panel. This panel also features a “Cal” function, for easy in-lab calibration of the temperature or CO2. In addition, humidity (up to 80%) can be added to the chamber by inserting the included (stainless steel) humidity reservoir. The CO2 level is constantly monitored using dual beam infrared sensing technology. In the event of a drop in CO2, audible and visual alarms are triggered, notifying the user of the error. Despite its small size, the incubator features a relatively large 20L chamber with the capacity for flasks and bottles up to 2 liters. Two removable, stainless-steel shelves are included. The shelves are perforated to improve airflow within the chamber. INCLUDED: The Benchmark MyTemp Mini CO2 Digital Incubator includes: - Two Adjustable Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

LM2539 Gel Electrophorese system M.0154

129,600 ClipTips - 50 ul, Thermo Scientific Filtered, Sterile, Racked/96 These are sold on (more) behalf of a client. The lot is brand new and unused. Quantity - Pallet of 27 boxes. 10 Racks in 1 Pack, 5 Packs in 1 Box. Make/Brand - Thermo ScientificModel Number - 94420253Product Number - 13246269Exp Date - 2025/2026SKU - TIP-50FS-THE The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Motic SM7-7TR-TACH Trinocular Stereo Microscope Objectives 1X Plan Achromat Objective (W.D. 90mm) O (more)ptical System Galilean Infinity Optical Design. Common Main Objective (CMO) Illumination LED 3W with Intensity Control Features - Features an optical performance with true colour reproduction, high resolution and low distortion - Ultra-flat stand bases for a relaxed positioning of hands and forearms facilitate lengthy preparation work - A variety of objectives and eyepieces allow tailoring a personal SM7 - The Galilean Optics of the SM7 show a 7:1 Zoom system, resulting in a standard magnification range of 8X-56X - For the best possible image results, a 1X Plan-Achromatic objective with a Working Distance of 90mm is available - Besides minimized chromatic and spherical aberrations, it is the resolution of the 1X Achromatic objective which makes the SM7 especially interesting for technical applications Motic's SM7 Plan Achromat is meant specifically for opaque samples, as it comes with a plain stand, although external light sources can be implemented. The SM7 Series features an optical performance with true colour reproduction, high resolution, and low distortion. Motic's new Galilean stereomicroscopes are our new highlight in terms of colour reproduction, resolution and spatial information for users from biology, medicine and industrial QC. INCLUDED: The Motic SM7-7TR-TACH Trinocular Stereo Microscope includes: - 10X/22 Eyepiece - Trinocular Tube - 7:1 Zoom Microscope Body - 1X Plan Achromat Objective (W.D. 90mm) - Standard Stand LED Reflected/Transmitted - Glass Plate (Ø160mm) - Power Supply - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty